USER’S MANUAL
1
Product information
A: Snapshot button
B: Adjustable lens ring
C: Multi purpose clamp
D: Status LED
E: USB cable
UK
Installation
1
PC on. Place CD in CD-ROM.
Windows Vista: Allow and execute all necessary actions.
2
Install driver; (1) “Latest driver from website”. (2) “Continue”. (3) “Download”. (4) “Run”.
Windows Vista: Allow and execute all necessary actions.
3 Follow on-screen instructions.
4 Place webcam; Connect USB.
5 Wait until Windows completes installation automatically.
Use webcam
6 Open AmCap.
7 Enable Preview.
8 Adjust lens ring untill image is focused.
9
Press button to make snapshot when the webcam is in use.
Click ‘File’ and select ‘Save’ to save the photograph.
Note
Software
• Use messenger service, like Live Messenger, for video conference. For help and information about Live
Messenger check www.msn.com.
• AmCap is a built-in video application. However, the webcam can also be used with any other video program.
• Read manual on CD for detailed webcam options and use of AmCap (only available in English).
• The AmCap video settings (like image control, face tracking, special effects, etc.) are also available within
other video programs.
• Click on “Install software” from Trust installation menu on CD to install additional software. This software
may only be available in English. Use it optionally to organize and to make videos and pictures. Use its Help if
assistance is needed.
• The driver on CD may be a preliminary version. It’s recommended to download and install the latest driver
(see 2).
• Always uninstall old driver, unplug Trust product and restart computer before installation of updated driver!
General usage
• Make sure there is sufficient light when use the webcam!
• Use soft brush to clean the lens when it’s dusty!
• The snapshot button works only when the webcam is in use with an application supporting this function!