Xylem YSI 910 COD User manual

910 COD Colorimeter

INSTRUCTION MANUAL: PAGES 2 - 13

MODE D‘EMPLOI: PAGES 14 - 25

INSTRUCCIONES: PÁGINA 26– 37

OPERATIONS MANUAL

Contact Information

ORDERING & TECHNICAL SUPPORT

Telephone: (800) 897-4151

(937) 767-7241

Monday through Friday, 8:00 AM to 5:00 PM ET

Fax: (937) 767-9353 (orders)

(937) 767-1058 (technical support)

Email: [email protected]

Mail: YSI Incorporated

1725 Brannum Lane

Yellow Springs, OH 45387

USA

Internet: www.ysi.com

When placing an order please have the following information available:

  •YSIaccountnumber(ifavailable)

  •NameandPhoneNumber

  •Modelnumberorbriefdescription

  •Billingandshippingaddress

  •Quantity

  •PurchaseOrderorCreditCard

SERVICE INFORMATION

YSI has authorized service centers throughout the United States and Internationally. For the nearest

servicecenterinformation,pleasevisitwww.ysi.comandclick‘Support’orcontactYSITechnical

Support directly at 800-897-4151.

Whenreturningaproductforservice,includetheProductReturnformwithcleaningcertication.

TheformmustbecompletelylledoutforanYSIServiceCentertoaccepttheinstrumentforservice.

TheProductReturnformmaybedownloadedatwww.ysi.comandclickingonthe‘Support”tab.

3

Table of Contents

CAUTION

Theaccuracyoftheinstrumentisonlyvalidiftheinstrumentisusedinan

environmentwithcontrolledelectromagneticdisturbancesaccordingtoDIN61326.

Wirelessdevices,e.g.wirelessphones,mustnotbeusedneartheinstrument.

General Notes ............................................................4

General Notes .............................................................4

Method Notes .............................................................4

DisplayBacklight ...........................................................5

RecallofStoredData .......................................................5

Replacementofbatteries .....................................................5

Methods .................................................................6

COD Reagents ............................................................6

Preparing the Sample .......................................................6

Guidelinesforphotometricmeasurements .......................................6

Measurement ..............................................................7

Menu options .............................................................8

Menu selections ............................................................8

Recallofstoreddata ........................................................8

Transmitting stored data .....................................................9

Setting date and time ........................................................9

Calibration Mode .........................................................10

Usercalibration ...........................................................10

Factorycalibrationreset ....................................................11

Technical data ...........................................................12

Operating messages .......................................................13

Error codes ..............................................................13

Battery Disposal ..........................................................13

ENGLISH

4

General Notes

• Priortomeasurementensurethatthesampleissuitableforanalysis(nomajorinterference)and

doesnotrequireanypreparationi.e.pHadjustment,ltrationetc.

• Reagentsaredesignedforuseinchemicalanalysisonlyandshouldbekeptwelloutofthereach

ofchildren.

• Ensureproperdisposalofreagentsolutions.

• MaterialSafetyDataSheets:availableonrequest.

Chemical Method Notes:

Method:

The sample is heated at 150

o

Cfortwohoursinthepresenceofpotassiumdichromate,whichisa

strong oxidizing agent. Organic compounds in the sample are oxidized, reducing the dichromate ion

(Cr

2

O

7

2–

) to the green chromic ion (Cr

3+

).

IntheLowRange(LR)Test(0-150mg/L),theamountofremainingCr

6+

is measured; In the

MidRange(MR)(0-1,500mg/L)or(HR)(0-15,000mg/L),theamountofCr

3+

produced is

measured.Theresultsaremeasuredastheamountofoxygen(O

2

)consumedperliterof

water sample. The LR and MR test is displayed in mg/L while the HR test shows g/L.

TheCODreagentcontainsbothmercuryandsilver—themercurycontrolschloride

interferencesandthesilverfunctionsasacatalysttospeedthereaction.

Application:

Samplescanbemeasuredifthechloridecontentdoesnotexceed1,000mg/l(LR/MR)or10,000mg/l

(HR).

Inexceptionalcases,compoundscontainedinthewatercannotbeadequatelyoxidized.Thisresults

inlowreading,comparedwiththereferencemethod.

Differentmethodsofsampling,preparationofthesampleitselfandthetimeelapsedbetweentaking

thesampleandanalysiscanallaffecttheobtainedresults.

General Notes

5

Replacement of batteries:

CAUTION:

Toensurethattheinstrumentiswaterproof:

• sealring(E)mustbeinposition

• batterycompartmentcover(B)mustbexedwiththefourscrews

Ifthebatteriesareremovedformorethanoneminutethedateandtimemenustartsautomaticallywhen

the photometer is turned on the next time.

AAA/LR 03

AAA/LR03

(D)batteries

(E) seal ring

(C) notch

(F)instrumentback

(B)batterycompartmentcover

(A) screws

ENGLISH

Pressthe[!]keytoturnthedisplaybacklightonoroff.Thebacklightisautomati-

callyturnedoffduringthemeasurement.

Iftheinstrumentisturnedon,pressthe[!]keyformorethan

4 seconds to access the recall menu.

!

Recall of stored data

Display backlight

6

Methods

COD Reagents

Selecttheappropriatevialforthedesiredrange*:

LR-Range:  0–150mg/l,partnumber251990Y,25count   

MR-Range:  0–1500mg/l,partnumber251991Y,25count  

HR-Range:  0–15000mg/l,partnumber251992Y,25count

*Reagents are also availble in 150 count packages.

Preparing the Sample

Openareactionvialwithawhitecapandaddthespeciedvolume.

(Ensurethatappropriatepersonnelsafetyequipmentisused.)

LR-/MR: 2 ml water sample

HR: 0.2 ml water sample

Prepareablank(Note1)byusingdeionizedwater(TOC-free)insteadofthesample

(LR/MR: 2 ml, HR: 0.2 ml).

Replacethecaptightly.Invertthevialgentlyseveraltimestomixthecontents(Thevialwillbecome

hotduringmixing!)anddigestthevialsfor120minutesinthereactoratatemperatureof150°C.

Removethevialsfromthereactorandallowthemtocooldownto60°Corless.Mixthecontentsby

invertingeachvialseveraltimeswhilestillwarm.Thenallowthevialstocooltoambienttemperature

beforemeasuring.

Guidelines for photometric measurements

1. Runsamplesandblankswiththesamebatchofvials.

Theblankisstablewhenstoredinthedarkandcanbeusedforfurthermeasurementswithvials

fromthesamebatch.

2. Don‘tplacehotvialsintheadapter.Allowthevialstocooltoroomtemperaturefor

a minimum 45 minutes. It is recommended to leave the vials to cool over night.

3. Suspended solids in the vial lead to incorrect measurements. For this reason it is important to place

thevialscarefullyintheadapter.Theprecipitantatthebottomofthesampleshouldnotbe

suspended.

4. Cleantheoutsideofthevialswithatoweltoremovengerprintsorothermarks

.

5. Avoidspillageofwaterorreagentsolutionintothesamplechamberbecausethiscanleadtoincor-

rect test results.

6. Contaminationofthetransparentcellchambercanresultinincorrectreadings.Checkatregularin-

tervalsand–ifnecessary–cleanthetransparentcellchamberusingamoistclothorcottonswab.

7. Largetemperaturedifferencesbetweentheinstrumentandtheenvironmentcanleadtoerrors–

e.g.duetotheformationofcondensationinthecellchamberoronthevial.

8. Toavoiderrorscausedbystraylightdonotusetheinstrumentinbrightsunlight.

7

ENGLISH

Measurement

Fixtheadapterfor16mmvialsonthesamplechamber.

Turntheunitonusingthe[ON/OFF]key.

Thedisplayshowsthefollowing:

Selecttherequiredtestusingthe[MODE]key.

Scroll Memory (SM)

Toavoidunnecessaryscrollingfortherequiredtestrange,theinstrument

memorizes the last rangeusedbeforebeingturnedoff.Whentheinstrumentis

turned on again, the scroll list comes up with the last used test range.

Thedisplayshowsthefollowing:

Placetheblankintheadapter(Note1–4)makingsurethatthe

marks

are aligned.

Blanksarespeciallypreparedforeachindividualtestrange.

Pressthe[ZERO/TEST]key.

The“Range“symbolashesforapprox.8seconds.

Thedisplayshowsthefollowing:

Afterzeroingremovethevialfromtheadapter.

Placethesampleintheadapter(Note2–4)makingsurethatthe

marks

are aligned.

Pressthe[ZERO/TEST]key.

The“Range“symbolashesforapprox.3seconds.

The result appears in the display.

LR-/MR-range: in mg/l

HR-range: in g/l

The result is saved automatically.

Tolerance:±3.5 %(fullscale)

Repeating the test:

Pressthe[ZERO/TEST]keyagain.

New zero calibration:

Pressthe[ZERO/TEST]keyfor2seconds.

RANGE

On

Off

Zero

Test

Mode

RANGE

0.0.0

RESULT

RANGE

Zero

Test

Zero

Test

Zero

Test

8

Menu Options

Menu selections

Pressthe[MODE]keyandhold.

Turntheunitonusingthe[ON/OFF]key.

Allowthe3decimalpointstobedisplayedbeforereleasingthe[MODE]key.

The[!]keyallowsforselectionofthefollowingmenupoints:

diS recall stored data

Prt printing stored data

setting the date and time

   usercalibration

Theselectedmenuisindicatedbyanarrowinthedisplay.

1

diS – Recall of stored data

Afterconrmingtheselectionwiththe[MODE]keythephotometershowsthelast

16datasetsinthefollowingformat(automaticallyproceedsevery3secondsuntil

result is displayed):

Number nxx(xx:16...1)

Year YYYY (e.g. 2010)

Date mm.dd (monthmonth:dayday)

Time hh:mm (hourhour:minuteminute)

Range Range

Result x.xx

The[ZERO/TEST]keyrepeatsthecurrentdataset.

The[MODE]keyscrollsthroughallstoreddatasets.

Exitthemenubypressing[!]key.

On

Off

Mode

!

Time Cal

Store Date

2

3 4

Mode

Zero

Test

diS

1

Time Cal

Store Date

1

2

3

4

9

ENGLISH

E 132

1

Prt – Transmitting stored data (to Printer or PC)

Note: To print data, or to transmit to a PC, the optional Series 900 Data Hub(Inf-

raredInterfaceModule)isrequired.

The Series 900 Data Hubandtheconnectedprinter/PCmustbeready.Press

the[MODE]keytostartthetransmitting,theinstrumentdisplays“PrtG”(Printing)

forapprox.1secondfollowedbythenumberoftherstdatasetanditstransmis-

sion.Alldatasetswillbetransmittedoneaftertheother.Afternishingtheinstru-

ment returns to test mode.

Theprintjobcanbecancelledbypressingthe[On/Off]key.Theinstrumentturns

off.

IftheinstrumentisnotabletocommunicatewiththeIRiM,atimeoutoccursafter

approx.2minutes.TheerrorE132isdisplayedforapprox.4seconds.Subse-

quently, the instrument returns to test mode (see also IRiM manual).

2

Setting date and time (24-hour-format)

Afterconrmingtheselectionwiththe[MODE]keythevaluetobeeditedwillbe

shownfor2sec.

Thesettingstartswiththeyear(YYYY)followedbytheactualvaluetobeedited.

Thesameappliesformonth(mm),day(dd),hour(hh)andminutes(mm).Setthe

minutesrstinstepsof10,pressthe[!]keytocontinuesettingtheminutesin

stepsof1.

Increasethevaluebypressingthe[MODE]key.

Decreasethevaluebypressing[ZERO/TEST]key.

Proceedtothenextvaluetobeeditedbypressing[!]key.

Aftersettingtheminutesandpressingthe[!]keythedisplaywillshow“ISSET”

and the instrument returns to the measurement mode.

On

Off

PrtG

Prt

1

Store Date

Time Cal

Mode

!

SET

DATE

YYYY

(2 sec.)

Mode

Zero

Test

Time Cal

Store Date

2

3

10

Calibration Mode

4

User calibration (cAL)

Afterconrmingtheselectionwiththe[MODE]keytheinstrumentwill

show CAL/LR.

Scrollthroughrangesusingthe[MODE]key.

Place the blankintheadaptermakingsurethatthemarks

are aligned.

Pressthe[ZERO/TEST]key.

The“Range“symbolashesforapprox.8seconds.

Thedisplayshowsthefollowinginalternatingmode:

Performmeasurementwithastandardofknownconcentrationasdescribed.

Pressthe[ZERO/TEST]key.

The“Range“symbolashesforapprox.3seconds.

The result is shown in the display, alternating with CAL.

Ifthereadingcorrespondswiththevalueofthecalibrationstandard(withinthe

speciedtolerance),exitcalibrationmodebypressingthe[ON/OFF]key.

Changing the displayed value:

Pressingthe[MODE]keyonceincreasesthedisplayedvalueby1digit.

Pressingthe[ZERO/TEST]keyoncedecreasesthedisplayedvalueby

1 digit.

Pressthecorrespondingkeyuntilthereadingequalsthevalueofthecalibration

standard.

Bypressingthe[ON/OFF]key,thenewcorrectionfactoriscalculatedandstored

intheusercalibrationsoftware.

Conrmationofcalibration(3seconds).

Note:TheinstrumentcalibrationintherangeMRisautomaticallytakenalsofor

HR.

usercalibration(Displayincalibrationmode)

factorycalibration(Displayincalibrationmode)

CAL

cAL

Time Cal

Store Date

4

Cal

CAL

LR

0.0.0

CAL

Zero

Test

Zero

Test

RANGE

CAL

RESULT

+ x

CAL

Mode

On

Off

Zero

Test

: :

RESULT

11

ENGLISH

FACTORY CALIBRATION RESET

Resettingtheusercalibrationtotheoriginalfactorycalibrationwillresetallme-

thods and ranges.

Ausercalibratedmethodisindicatedbyanarrowwhilethetestresultis

displayed.

Toresetthecalibrationpressboththe[MODE]and[ZERO/TEST]key

and hold.

Turntheunitonusingthe[ON/OFF]key.

Releasethe[MODE]and[ZERO/TEST]keysafterapprox.1second.

Thefollowingmessageswillappearinturnonthedisplay:

Thefactorysettingisactive.

(SELstandsforSelect)

or:

Calibrationhasbeensetbytheuser.

(Iftheusercalibrationistoberetained,turntheunitoffusingthe

[ON/OFF]key).

Calibrationisresettothefactorysettingbypressingthe[MODE]key.

Thefollowingmessageswillappearinturnonthedisplay:

Turntheunitoffusingthe[ON/OFF]key.

cAL

SEL

CAL

SEL

Mode

On

Off

Mode

On

Off

Zero

Test

Time Cal

Store Date

RESULT

Cal

12

Technical Data

Instrument: double wavelength, automatic wavelength selection,

direct reading colorimeter

Light source: LEDs,interferencelters(IF)andphotosensorintransparent

   cellchamber.WavelengthspecicationsoftheIF:

430 nm

= 5 nm

610 nm = 6 nm

Wavelength accuracy: ± 1 nm

Photometric accuracy*: 3%FS(T=20° C–25° C)

Photometric resolution: 0.01 A

Power supply:  4batteries(AAA/LR 03)

   lifetime:approx.17hoursor5000tests

Auto-OFF:   instrumentautomaticallyturnsoff 10minutesafterlastkeypress

Display: backlitLCD(onkeypress)

Storage:   internalringmemoryfor16datasets

Serial Interface:  IRinterfacefordatatransfer

Time:   realtimeclockunddate

Calibration:   userandfactorycalibration

   resettingtofactorycalibrationpossible

Dimensions: 155 x 75 x 35 mm (LxWxH)

Weight:   approx.260g(incl.batteries)

Ambient conditions: temperature:5–40°C

rel. humidity: 30–90% (non-condensing)

Waterproof:   oating;IP68(1hourat0.1meter)

CE:   CerticateforDeclarationofCE-Conformity

*measuredwithstandardsolutions

Toensuremaximumaccuracyoftestresults,alwaysusethereagentsystems

suppliedbytheinstrumentmanufacturer.

13

ENGLISH

Operating Messages & Error Codes

Operating messages

Measuringrangeexceededorexcessiveturbidity.

Resultbelowthelowestlimitofthemeasuringrange.

Replacebatteries,nofurthertestspossible.

Batterycapacityistoolowforthedisplaybacklight;

measurementisstillpossible.

Ausercalibratedmethodisindicatedbyanarrowwhilethetestresultis

displayed(see“Factorycalibrationreset“).

Error codes

Lightabsorptiontoogreat.Reasons:e.g.dirtyoptics.

Calibrationfactor„outofrange“

Too much light reaching the detector.

Batterycapacitywastoolowduringmeasurement.Changebattery.

LR: Factorycalibrationincorrect/erased

LR: Usercalibrationincorrect/erased

MR: Factorycalibrationincorrect/erased

MR: Usercalibrationincorrect/erased

Battery Disposal

The910CODColorimeterispoweredbyalkalinebatterieswhichtheusermust

removeanddisposeofwhenthebatteriesnolongerpowertheinstrument.Dis-

posalrequirementsvarybycountryandregion,andusersareexpectedtounder-

standandfollowthebatterydisposalrequirementsfortheirspeciclocale.

Hı

Lo

E 10 / E 11

E 70

E 71

E 72

E 73

E 22

btLo

Time Cal

Store Date

RESULT

Cal

E27 / E28 / E29

E23 / E24 / E25

E 20 / E 21

Page is loading ...

1)Thetissueinplantsthatbringswaterupwardfromtheroots;

2)aleadingglobalwatertechnologycompany.

We’re12,000peopleuniedinacommonpurpose:creatinginnovativesolutions

tomeetourworld’swaterneeds.Developingnewtechnologiesthatwillimprove

thewaywaterisused,conserved,andre-usedinthefutureiscentraltoourwork.

We move, treat, analyze, and return water to the environment, and we help people

usewaterefciently,intheirhomes,buildings,factoriesandfarms.Inmorethan

150 countries, we have strong, long-standing relationships with customers who

knowusforourpowerfulcombinationofleadingproductbrandsandapplications

expertise,backedbyalegacyofinnovation.

For more information on how Xylem can help you, go to www.xyleminc.com

Xylem

YSI

1725 Brannum Lane

Yellow Springs OH 45387

Tel +1.937.767.7241

Fax +1.937.767.9353

www.ysi.com

[email protected]

910 COD ColorimeterisatrademarkofXylemInc.oroneofitssubsidiaries.

Xylem YSI 910 COD User manual

This manual is also suitable for

Xylem YSI 910 COD User manual

in other languages

Related papers

Other documents