Insignia NS-PCH6441 Quick setup guide
- Category
- Interface hubs
- Type
- Quick setup guide
PACKAGE CONTENTS
• USB Type-C/A Hub
• Built-in USB cable
• Quick Setup Guide
SYSTEM REQUIREMENTS
• Computer with a Type-C USB port
Note: USB 3.0 is backward compatible with USB 2.0 and
1.1. However, data transfer speed will be limited to the
speed of the slowest port used.
• Windows® 10, Windows® 8.1, Windows® 8,
Windows® 7, Windows Vista®, Mac OS X 9.0 or
later, Linux, or Kernel 2.4.1 or above
FEATURES
• Two Type-C USB ports
• Two Type-A USB 3.0 ports
• Backward compatible with USB 1.1 and USB 2.0
devices
• Data transfer rate up to 5.0 Gbps (maximum)
Top view
Quick Setup Guide
|
NS-PCH6441
USB Type C/A Hub
Before using your new product, please read these instructions to prevent any damage.
INSTALLING YOUR HUB
• Plug the USB Type-C connector to the USB Type-C
port on your computer.
• To install USB peripherals, plug the devices into
the USB HUB.
• To remove USB peripherals, unplug the devices
from the USB HUB.
• To remove the USB HUB, unplug the USB
connector from your computer.
Cable
Type-C
USB connector
Type-C
USB port
USB 3.0
Type-A
port
USB 3.0
Type-A
port
Type-C
USB port
V1 ENGLISH 15-0677
SPECIFICATIONS
USB version
LEGAL NOTICES
FCC Caution
Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
FCC Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
ICES Statement
CAN ICES-3 (B)/NMB-3 (B)
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
©2015 Best Buy. All rights reserved.
Made in China
Transmission port
Transmission rate
Work temperature
Work humidity
Dimensions
USB 3.0
5.0 Gbps (maximum)
-22°F~140°F (-30°C~60°C)
65% RH ~ 85% RH
3.93 × 18.89 × 0.50 in
(100.02 × 48.00 × 12.80 cm)
-
1
-
2
Insignia NS-PCH6441 Quick setup guide
- Category
- Interface hubs
- Type
- Quick setup guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Insignia NS-PCH6430 Quick setup guide
-
-
-
US Robotics NS-PCCUP53 User manual
-
Insignia NS-PH3A4AP Quick setup guide
-
-
-
-
Insignia NS-GXBOSUSBS18 Quick setup guide
-
Insignia NS-PUCHUB219 Quick start guide