2. Computers & electronics
  3. Computer components
  4. Interface components
  5. Interface hubs
  6. Insignia
  7. NS-PH3A4AP
NS-PH3A4AP

Insignia NS-PH3A4AP Quick setup guide

  • Hello! I am an AI chatbot trained to assist you with the Insignia NS-PH3A4AP Quick setup guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What data transfer speed does the hub support?
    Can I connect USB 2.0 devices to the hub?
    How many USB ports does the hub have?
    Does the hub require additional software or drivers?
    What is the power source for the hub?
    What is the recommended operating temperature for the hub?
    What is the warranty period for the hub?
PACKAGE CONTENTS
• USB 3.0 4-Port Hub
• AC adapter 5V/4A
• USB cable
• Quick Setup Guide
FEATURES
• Backwards compatible with previous-generation USB
revisions
• Adds expansion ports with supplemental power to
your computer
• Four USB 3.0 extended ports
• LED power indicator light
SYSTEM REQUIREMENTS
• Computer with a USB 2.0 or 3.0 port
Note: USB 3.0 is compatible with USB 2.0, however data
transfer speed will be limited to the 2.0 level.
• Windows 10, macOS, and Chrome OS
• Blue LED power indicator
• Supports hot-swappable and Plug & Play capability
• Supports over-current protection at USB host port
Upstream port
(to computer)
DC jack
LED
Downstream ports
(to devices)
Before using your new product, please read these instructions to prevent any damage.
INSTALLING YOUR HUB
Note: When you connect your hub to a computer, the
computer detects your hub and automatically installs the
driver.
1 Connect the smaller end of the USB cable to the
upstream port on the rear of the hub, then connect
the larger end of the USB cable to an open USB port
on your computer.
QUICK SETUP GUIDE
USB 3.0 4 Port
Powered Hub
NS-PH3A4AP / NS-PH3A4AP-C
NS-PH3A4AP_-C_21-0153_QSG_V1_EN_Final.ai 1 5/26/2021 2:19:07 PM
V1 ENGLISH 21-0153
2 Plug the AC power adapter into your hub’s DC jack
and into a power outlet.
3 Connect your USB devices into your hub.
Note: Do not disconnect from your computer or USB device
during data transfer. Doing so may corrupt your data or
damage your devices.
SPECIFICATIONS
• Transmission port: USB 3.0
•Transmission rate: 5.0 Gbps (maximum)
• Work temperature: 32°F~122°F (0°C~50°C)
• Work humidity: 20% RH ~ 85% RH
• Dimensions (H × W × D): 3.62 × 1.95 × 0.71 in.
9.2 × 4.95 × 1.8 cm
LEGAL NOTICES
FCC Caution
Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
ICES Statement
CAN ICES-003(B) / NMB-003(B)
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call
1-877-467-4289 (U.S. and Canada)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2021 Best Buy. All rights reserved.
2
3
NS-PH3A4AP_-C_21-0153_QSG_V1_EN_Final.ai 2 5/26/2021 2:19:07 PM
/