G
e
ta
c
S
ecr
et
C
onfide
nti
a
l
D
ocu
m
e
nt
Quick Start Guide
Congratulations and thank you for purchasing the notebook computer.
This guide provides step-by-step instructions for a quick setup of your computer.
1
Install the battery pack
2
Connect AC power
3
Power up
4
Find more information
Install the battery pack if it has not been
installed in your computer.
Carefully place the computer upside down.
Make sure that the battery security lock is in
the unlock(
)position.
Fit the battery pack into its compartment and
slide the security lock to the lock(
)
position.
The first time you use your computer, use the
AC adapter. This will allow the battery pack to
fully charge.
Plug the DC cord of the AC adapter to the
power connector on the computer.
Plug the female end of the AC power cord to
the AC adapter and the male end to an
electrical outlet.
The Battery Charge Indicator(
)on the
computer glows amber to indicate that charging
is in progress and lights green when the battery
is fully charged.
Open the top cover by pulling on the cover
latch and lifting up the cover.
Press the power button to power up and the
AC Power indicator (
) lights green. The
operating system such as Windows should
start.
For complete information, please refer to the
User’s Manual (in PDF format) supplied on the
computer.
Double-click on the User’s Manual icon
located on your desktop to view the User’s
Manual.
P/N: 561512700001
May 2007