2. Toro
  3. Starter Fuse Kit, GrandStand Mower

Toro Starter Fuse Kit, GrandStand Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Starter Fuse Kit, GrandStand Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3429-560RevA
StarterFuseKit
GrandStand
®
Mower
ModelNo.139-5555
InstallationInstructions
Installation
PreparingtheMachine
1.Parkthemachineonalevelsurface.
2.DisengagethePTO,movethemotion-control
leverstotheNEUTRAL-LOCKposition,and
engagetheparkingbrake.
3.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
RemovingtheExistingWire
1.Disconnectthebattery;disconnectthenegative
(-)terminalrstandthepositive(+)terminallast.
2.Removethefueltank;refertotheOperator’s
Manualforthemachine.
3.Insidetheleftsideofthetower,removetherelay
fromtheconnector(Figure1).
g278774
Figure1
1.Relay
2.Connector
©2018—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3429-560*A
4.Removethescrew,washer,andnutsecuring
theconnectortothetower(Figure2).
g278773
Figure2
1.Nut
3.Screw
2.Washer
5.Useaterminalremovaltooltoremovethe
secondarylockfromtheconnector(Figure3).
g278815
Figure3
1.Secondarylock
2.Terminalremovaltool
6.Usetheterminalremovaltooltoremovethe2
terminalsforthebluewiresshowninFigure4.
g278814
Figure4
1.Bluewires
7.Cuttheshortwireconnectedtobothterminals
asclosetothedualterminatedterminalas
possible(Figure5).Discardthewire.
Important:Donotcuttheotherwire
connectedtotheterminal.
g278813
Figure5
1.Cutanddiscardthiswire.
3.Dualterminatedterminal
2.Donotcutthiswire.
2
InstallingtheNewWire
1.Bendupthetabontheexistingterminalto
matchtheterminalofthenewwire.
g279687
Figure6
1.Tabonexistingterminal
2.Tabonterminalofnew
wire
2.Installtheexistingwireharnessterminalandthe
newwireharnessterminalintotheconnector
asshowninFigure5.
g278817
Figure7
1.Newwireharnessterminal2.Existingwireharness
terminal
3.Installthesecondarylockontheconnector
(Figure3).
4.Installtheconnectortothetowerusingthe
screw,washer,andnutremovedpreviously
(Figure2).
5.Installtherelaytotheconnector(Figure1).
6.Removetherubbercoverfromthestarterpost
ontheengineandremovethenut(Figure8).
g278775
Figure8
1.Rubbercoveroverstarterpost
7.Followingtheexistingwireharness,routethe
newwireharnesstothestarterpost(Figure9).
g279688
Figure9
1.Newwireharness2.Existingwireharness
8.Installtheringfromthenewwiretothepostand
secureitwiththenut.Installtherubbercover
(Figure8).
9.Securethenewwireharnesstotheexistingwire
harnessusingcableties.
10.Installthefueltank;refertotheOperator’s
Manualforthemachine.
11.Connectthebattery;connectthepositive(+)
terminalrstandthenegative(-)terminallast.
3
/