Extron Cable Cubby 202 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Extron Cable Cubby 202 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
3
1
2
Secure the Retractor bracket on the bottom of
the enclosure using the provided bracket screws.
Insert the pin through
the Retractor mounting
hole on the side of
the bracket, and use
the clip to secure the
pin at the other end.
3
1
Secure two single-space
AAPs in the AAP bracket.
1
3
Secure the AAP bracket in
the enclosure using the
provided plate screws.
Insert cables through the
bottom of the Cable Cubby
and connect cables to the AAPs.
2
#4-40 Nut with
Captive Washer
3
S
t
p
h
n
g
Insert Retractor
modules into the
Retractor bracket.
Accessories for Cable Cubby 202 • Setup Guide
This guide provides instructions for assembling and installing two accessories for the
Cable Cubby 202: the double-space AAP bracket and the Retractor bracket.
AAP Bracket
The AAP bracket accomodates two single-space
AAPs in the Cable Cubby enclosure. Follow
these steps to install your choice of AAPs and
the AAP bracket.
Retractor Bracket
The Retractor bracket accommodates up to three Retractor modules in the Cable Cubby
enclosure. Follow the steps below to install the bracket and Retractor modules.
NOTE: See the next page for Retractor dimensions.
3
1
2
Secure the Retractor bracket on the bottom of
the enclosure using the provided bracket screws.
Insert the pin through
the Retractor mounting
hole on the side of
the bracket, and use
the clip to secure the
pin at the other end.
1
Secure two single-space
AAPs in the AAP bracket.
1
3
Secure the AAP bracket in
the enclosure using the
provided plate screws.
Insert the cables through the
bottom of the Cable Cubby
and connect cables to the AAPs.
2
#4-40 Nut with
Captive Washer
3
S
t
p
h
n
g
Insert Retractors into
the Retractor bracket.
Accessories for Cable Cubby 202 • Setup Guide (Continued)
68-2487-01
Rev. B
06 16
Retractor Dimensions
When installing Retractor modules in the Cable Cubby, ensure that there is enough space for
the Retractor assembly under the table (see the Retractor dimensions below).
30º
30º
15.2"
(38.6 cm)
21.2"
(53.8 cm)
23.7"
(60.3 cm)
11.8"
(29.9 cm)
8.8"
(22.4 cm)
26.7"
(67.7 cm)
29.2"
(74.0 cm)
8.9"
(22.6 cm)
17.7"
(45.0 cm)
Retractor
Retractor XL
8.9"
(22.6 cm)
23.2"
(58.8 cm)
21.5"
(54.6 cm)
1.9"
(4.8 cm)
Table Top
Table Top
Extron Headquarters
+1.800.633.9876
(Inside USA/Canada Only)
Extron USA - West Extron USA - East
+1.714.491.1500 +1.919.850.1000
FAX:
+1.714.491.1517 +1.919.850.1001
Extron Europe
+800.3987.6673
(Inside Europe
Only)
+31.33.453.4040
FAX:
+31.33.453.4050
Extron Asia
+65.6383.4400
FAX:
+65.6383.4664
Extron Japan
+81.3.3511.7655
FAX:
+81.3.3511.7656
Extron China
+86.21.3760.1568
FAX:
+86.21.3760.1566
Extron India
1800.3070.3777
(Inside India Only)
+91.80.3055.3777
FAX:
+91.80.3055.3737
Extron Middle East
+971.4.299.1800
FAX:
+971.4.299.1880
Extron Australia
+61.8.8351.2188
FAX:
+61.8.8351.2511
© 2016 Extron Electronics — All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com
/