Everbilt HR-22-H Installation guide

22”x22”x16” Galvanized Water Heater Stand

#HR-22-H

3/8

Assemble using either the #3 Phillips screwdriver, a drill with 3/8” nut driver or a 3/8” wrench or socket

Ensablar usando un desarmador de cruz #3, un taladro con broca de 3/8” o una llave o dado de 3/8”

Drill with 3/8” nut driver

Taladro con broca de 3/8”

Water Heater Stand rated up to 600 pounds

Gradas de Clentadores con capacidad para 600 libras