John Lewis JLWD1615 Quick start guide

Category
Washing machines
Type
Quick start guide
Quick User’s Guide
The On/Off button with AUTO Stand-by function
The Stand-by function automatically deactivates the appliance to reduce energy consumption when:
1. You do not use the appliance for 5 minutes.
Press the button On/Off to activate the
appliance again.
2. The washing programme fi nished 5 minutes
ago. Press the On/Off button to activate the
appliance again. The display shows the end of
previous programme.
Turn the programme dial to set a new cycle.
If the dial is rotated to the reset position
,
the appliance automatically turns off in
30 seconds.
Before activating the appliance make sure
you have removed all packaging including
the transit bolts (refer to the Installation
Instructions).
For more information please always
refer to the User Manual.
123 5674
14 13 11 10 9 812
1. Programme dial
2. Spin touch button
3. Temperature touch button
4. Display
5. Time dry touch button
6. Auto dry touch button
7. Start/Pause touch button
8. Delay start touch button
9. Mode - Dry touch button
10. Reduce time touch button
11. Stain touch button
12. Prewash touch button
13. Mode - Wash touch button
14. On/Off push button
Control Panel
Interactive Display
Temperature indicator. The indicator appears when a cold wash is selected.
Door locked indicator and Child lock indicator.
The time area can show:
Programme duration
Delay time
Cycle end
Warning code
Reduce time bars level indicator.
Washing mode indicator. Extra rinse indicator. Extra soft indicator.
Drying mode indicator. Time dry indicator. Auto dry indicator.
Steam indicator. Anti-crease indicator.
Drum clean indicator: Indicates the drum should be cleaned.
Spin speed indicator. No spin speed indicator. Spin phase is off.
Rinse hold indicator
Maximum laundry load indicator. Add Garments indicator - illuminates at the
beginning of the Wash phase, while the user can still pause the appliance and add more
laundry.
Flashes to warn of overloading.
Before you activate the appliance read the
Safety Information in the User Manual.
Press and hold the On/Off button for a
couple of seconds to activate or deactivate
the appliance. A tune sounds when the
appliance is activated.
1. Set the dial to a selected programme:
The indicator of the button Start/Pause
ashes slowly.
2. If necessary, change the temperature and the
spin speed and add available options. When
you activate an option, the indicator of the
set option comes on.
Activating the appliance Setting a programme
Programmes
Programme
Temperature range
Programme description
(Type of load and soil level)
Cotton
90°C - Cold
White cotton and coloured cotton.
Normal soil and light soil.
Cotton Eco
60°C - 40°C
White cotton and colour-fast cotton.
Normal soil.The energy consumption decreases and cycle duration is
extended.
Synthetics
60°C - Cold
Synthetic items or mixed fabric items.
Normal soil.
Delicates
40°C - Cold
Delicate fabrics such as acrylics, viscose, polyester items.
Normal soil.
Wool
40°C - Cold
Machine washable wool, hand washable wool and delicate fabrics
with <<hand washing>> care symbol.
Steam Refresh
Cottons, synthetics, delicates. Steam short steam programme to refresh
even your very delicate garments.
Spin/Drain
All fabrics, except woollens and delicate fabrics.
Rinse
All fabrics, except woollens and very delicate fabrics.
Machine clean
60°C
Maintenance cycle with hot water to clean and freshen the empty drum
and to remove residue that may cause odour.
Anti-allergy
60°C
White cotton items. This helps remove germs and bacteria.
Sportswear
40°C - Cold
Mixed fabric sportswear. Light soil items or items to refresh.
Outdoor
40°C - Cold
Modern sports clothes such as gym, cycling, jogging and similar
items. Waterproof, waterproof-breathable and water repellent fabrics.
Denim
40°C - Cold
Special programme for Denim clothing with delicate washing
phase to minimize colour fading and marks. For better care a reduced
load size is recommended.
1h wash & dry 1kg
40°C - 30°C
Mixed fabrics (cotton and synthetic items).Complete short programme
to wash and dry laundry loads up to 1kg in one go. It only lasts 1 hour.
Troubleshooting
Refer to Safety chapter in User
Manual.
Deactivate the appliance before
you do the checks.
The detergent dispenser
Detergent compartment for prewash,
soak programme or stain remover.
Detergent compartment for washing
phase.
Compartment for liquid additives.
Caution! Do not exceed
the Max level.
Flap for powder or liquid detergent.
To use powder detergent, turn the fl ap up.
To use liquid detergent, turn the fl ap
down.
First try to fi nd solution to the problem. If the error
persists, contact the Authorised Service Centre.
The display can show alarm codes (refer to the
“Troubleshooting” table in the User Manual):
The appliance does not fi ll with water
properly.
The appliance does not drain the water.
The appliance door is open or not
closed correctly.
The mains supply is unstable.
Wait until the mains supply is stable.
No communication between electronic
elements of the appliance. Switch it off
and switch on again.
Clean the appliance fi lter regularly.
Refer to ‘Care and Cleaning’
chapter in user manual.
Care and cleaning
If the appliance is overloaded, remove
some items from the drum and/or
hold the door shut and push the Start/
Pause button at the same time until the
indicator Door lock stops fl ashing.
When you use the liquid detergent:
Do not use gelatinous or thick liquid
detergents.
Do not exceed the maximum level
indicated on the fl ap.
Do not set the delay start.
157026860-A-012019
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

John Lewis JLWD1615 Quick start guide

Category
Washing machines
Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI