John Lewis JLWM1407 Quick start guide
- Category
- Washing machines
- Type
- Quick start guide
Quick User’s Guide
The On/O button with AUTO Stand-by function
The Stand-by function automatically deactivates the appliance to decrease energy consumption when:
• You do not use the appliance for 5
minutes. Pr
activate the appliance again.
• After 5 minutes from the end of the
washing programme. Pr
button to activate the appliance again.
The display shows the end of the
previous programme. Turn the
programme dial to set a new cycle.
If the dial is rotated to the reset
position
, the appliance automatically
in 30 seconds.
Before you activate the appliance, make
sure you have removed all packaging
including the transit bolts (refer
to the Installation Instructions).
For more information please always
refer to the User Manual.
3s
Reduce
time
Delay start
Start/
Pause
P
r
ewa
s
h
E
xtra rinse
Ex
tr
a
s
o
f
t
Temp
Spin
Cold
Rinse
hold
No spin
Night
90
°
60
°
800
1200
1400
40
°
30
°
20
°
CottonDenim
Outdoor
Sports heavy
Wool
Silk
Duvet
White cottons
Cotton eco
Synthetics
Delicates
14 min wash
Rinse
Spin/Drain
2 3 4 5
11 10 7
1
689
1. Programme dial
2. Display
3. Delay start touch button
4. Time manager touch button
5. Start/Pause touch button
6. Extra soft touch button
7. Extra rinse
8. Prewash touch button
9. Spin reduction options touch button
10. Temperature selection touch button
11. On/O
push button
Control Panel
Interactive Display
A B C D
E
FG
Door locked indicator and Child lock indicator.
Delay start indicator.
The time area can show:
Programme duration
Delay time
Cycle
Warning code
Time Manager bars level indicator.
Drum clean indicator.
Child safety lock indicator.
Add garments indicator. Illuminates at the beginning of the Wash phase, while the user
can still pause the appliance and add more laundry.
Before you activate the appliance read the
Safety Information in the User Manual.
Press and hold the On/Off button for a
couple of seconds to activate or deactivate
the appliance. A tune sounds when the
appliance is activated. The programme dial is
automatically set on Cotton programme.
1. Set the dial to a selected programme:
• The indicator of the button Start/Pause
fl ashes slowly.
2. If necessary, change the temperature and the
spin speed or add available options. When
you activate an option, the indicator of the
set option comes on.
Activating the appliance Setting a programme
Programmes
Programme
Temperature range
Programme description
(Type of load and soil level)
Cotton
90°C - Cold
White cotton and coloured cotton.
Normal soil and light soil.
Cotton Eco
60°C - 40°C
White cotton and colour-fast cotton.
Normal soil.The energy consumption and cycle duration decreases.
Synthetics
60°C - Cold
Synthetic items or mixed fabric items.
Normal soil.
Delicates
40°C - Cold
Delicate fabrics as acrylics, viscose, polyester items.
Normal soil.
14 min wash 30°C
Synthetic and mixed fabric items. Light soil and items to freshen up.
Rinse
All fabrics, except woollens and very delicate fabrics.
Spin/Drain
All fabrics, except woollens and delicate fabrics.
White cottons 60°C
White cotton items.
Duvet
60°C - Cold
Single synthetic blanket, padded clothes, duvets, down jackets
and similar items.
Silk 30°C
Programme for silk and mixed synthetic items.
Wool
40°C - Cold
Machine washable wool, hand washable wool and delicate fabrics
with <<hand washing>> care symbol.
Sports heavy
40°C - Cold
Mixed fabric sportswear. Light soil items or items to refresh.
Outdoor
40°C - Cold
Modern sports clothes such as gym, cycling, jogging and similar items.
Denim
40°C - Cold
Special programme for Denim clothing with delicate washing
phase to minimize colour fading and marks. For better care a
reduced load size is recommended.
Troubleshooting
Refer to Safety chapter in User
Manual.
Deactivate the appliance before
you do the checks.
The detergent dispenser
Detergent compartment for prewash,
soak programme or stain remover.
Detergent compartment for washing
phase.
Compartment for liquid additives.
Caution! Do not exceed
the Max level.
Flap for powder or liquid detergent.
To use powder detergent, turn the fl ap up.
To use liquid detergent, turn the fl ap down.
First try to fi nd a solution to the problem.
If the error persists, contact the Authorised
Service Centre.
The display can show alarm codes (refer to the
“Troubleshooting” table in the User Manual):
The appliance does not fi ll with water
properly.
The appliance does not drain the water.
The appliance door is open or not
closed correctly.
The mains supply is unstable.
Wait until the mains supply is stable.
No communication between electronic
elements of the appliance. Switch it off
and switch on again.
Clean the appliance fi lter regularly.
Refer to ‘Care and Cleaning’
chapter in the user manual.
Care and cleaning
If the appliance is overloaded, remove
some items from the drum and/or
hold the door shut and push the Start/
Pause button at the same time until the
indicator Door lock stops fl ashing.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid
detergents.
• Do not exceed the maximum level
indicated on the fl ap.
• Do not set the delay start.
192941040-B-232017
-
1
-
2
-
3
-
4
John Lewis JLWM1407 Quick start guide
- Category
- Washing machines
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
John Lewis JLWM1607 Quick start guide
-
John Lewis JLBIWM1404 Quick start guide
-
-
John Lewis JLWM1427 Quick start guide
-
-
-
-
-
-