2. Home
  3. Domestic appliances
  4. Large home appliances
  5. Washing machines
  6. John Lewis
  7. JLBIWM1404
JLBIWM1404

John Lewis JLBIWM1404 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the John Lewis JLBIWM1404 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How do I activate the appliance?
    How do I set a program?
    What is the Machine Clean program?
    How do I use the detergent dispenser?
    What should I do if the appliance is overloaded?
    What do the alarm codes on the display mean?
    How do I clean the appliance filter?
Quick User’s Guide
The On/Off button with AUTO Stand-by function
The Stand-by function automatically deactivates the appliance to reduce energy consumption when:
1. You do not use the appliance for 5 minutes.
Press the button On/Off to activate the
appliance again.
2. The washing programme fi nished 5 minutes
ago. Once activate the appliance display
shows the end of the cycle.
Turn the programme dial to set a new cycle.
If the dial is rotated to the reset position
,
the appliance automatically turns off in
30 seconds.
Before activating the appliance make sure
you have removed all packaging including
the transit bolts (refer to the Installation
Instructions in the User Manual).
For more information please always
refer to the User Manual.
Before you activate the appliance read
the ‘Safety’ chapters in the user manual.
1. Programme dial
2. Display
3. Delay start touch button
4. Reduce time touch button
5. Start/Pause touch button
6. Stain touch button
7. Extra soft touch button
8. Prewash touch button
9. Spin touch button
10. Temperature touch button
11. On/Off push button
Control Panel
1
67891011
234
5
Interactive Display
Door locked indicator and Delay start indicator.
The time area can show:
Reset position
Programme duration
Delay time
Cycle end
Warning code
Reduce time indicator: level bars.
Anti-stain indicator. Extra rinse indicator.
Indicator for adding garments. Child lock indicator.
Machine clean indicator. Anti-crease indicator.
Before you activate the appliance read the
Safety Information in the User Manual.
1. Press and hold the On/Off button
for a couple of seconds to activate or
deactivate the appliance. A tune sounds
when the appliance is activated.
2. Set the dial to a selected programme:
the indicator of the Start/Pause button
fl ashes slowly.
3. If necessary, change the temperature and the
spin speed and add available options. When
you activate an option, the indicator of the
set option comes on.
4. Press the Start/Pause button to start the
programme.
Activating the appliance Setting a programme
Programmes
Programme
Temperature range
Programme description
(Type of load and soil level)
Cotton
90°C - Cold
White cotton and coloured cotton.
Normal soil and light soil.
Cotton Eco
60°C - 40°C
White cotton and colour-fast cotton.
Normal soil. The energy consumption decreases and cycle duration is
extended.
Synthetics
60°C - Cold
Synthetic items or mixed fabric items.
Normal soil.
Delicates
40°C - Cold
Delicate fabrics such as acrylics, viscose, polyester items.
Normal soil.
Anti-allergy
60°C
White cotton items. This helps remove germs and bacteria.
Machine clean
60°C
Maintenance cycle with hot water to clean and freshen the empty
drum and to remove residue that may cause odour.
Spin/Drain
All fabrics, except woollens and delicate fabrics.
Rinse
All fabrics, except woollens and very delicate fabrics.
Duvet
60°C - Cold
Single synthetic blanket, bedspread, duvet.
14min wash
30°C
Synthetic and mixed fabric.
Lightly soiled items and garments to freshen up.
Sportswear
40°C - Cold
Mixed fabric sportswear. Light soil items or items to refresh.
Outdoor
40°C - Cold
Modern sports clothes such as gym, cycling, jogging and similar
items. Waterproof, waterproof-breathable and water repellent fabrics.
Denim
40°C - Cold
Special programme for Denim clothing with delicate washing
phase to minimize colour fading and marks. For better care a reduced
load size is recommended.
Wool/Silk
40°C - Cold
Machine washable wool, hand washable wool and delicate fabrics
with <<hand washing>> care symbol.
Troubleshooting
Refer to Safety chapter in User
Manual.
Deactivate the appliance before
you do the checks.
The detergent dispenser
Detergent compartment for prewash,
soak programme or stain remover.
Detergent compartment for washing
phase.
Compartment for liquid additives.
Caution! Do not exceed
the Max level.
Flap for powder or liquid detergent.
To use powder detergent, turn the fl ap up.
To use liquid detergent, turn the fl ap
down.
First try to fi nd solution to the problem. If the error
persists, contact the Authorised Service Centre.
The display can show alarm codes (refer to the
“Troubleshooting” table in the User Manual):
The appliance does not fi ll with water
properly.
The appliance does not drain the water.
The appliance door is open or not
closed correctly.
The mains supply is unstable.
Wait until the mains supply is stable.
No communication between electronic
elements of the appliance. Switch it off
and switch on again.
The anti-fl ood device is on. Disconnect the
appliance and close the water tap. Contact
the Authorised Service Centre.
Clean the appliance fi lter regularly.
Refer to ‘Care and Cleaning’
chapter in user manual.
Care and cleaning
If the appliance is overloaded, remove
some items from the drum and/or
hold the door shut and push the Start/
Pause button at the same time until the
indicator Door lock stops fl ashing.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid
detergents.
• Do not exceed the maximum level
indicated on the fl ap.
• Do not set the delay start.
157026110-B-062019
/