Mircom LT-929 UIMA Installation guide

LT-929 UIMA
Mircom
Brand
Mircom
Model
LT-929 UIMA
Type
Installation guide

Mircom LT-929 UIMA is a USB to RS-485/232 converter that allows for communication between a computer and devices using RS-485 or RS-232 protocols. It supports data transfer rates up to 921.6 Kbps and is compatible with Windows 2000, XP, and Vista. The device is easy to install and comes with necessary drivers on the included CD-ROM. It also features a convenient Load VCP option for troubleshooting and supports both RS-485 and RS-232 connections.

Mircom LT-929 UIMA is a USB to RS-485/232 converter that allows for communication between a computer and devices using RS-485 or RS-232 protocols. It supports data transfer rates up to 921.6 Kbps and is compatible with Windows 2000, XP, and Vista. The device is easy to install and comes with necessary drivers on the included CD-ROM. It also features a convenient Load VCP option for troubleshooting and supports both RS-485 and RS-232 connections.

Canada
25 Interchange Way
Vaughan, ON L4K 5W3
Tel: 905-660-4655 Fax: 905-660-4113
Mircom 2002
Printed in Canada
Subject to change without prior notice
www.mircom.com
UIMA
USB TO RS-485/232 CONVERTOR
LT-929 Rev. 3
March 2009
Windows Driver Installation Instructions
Advanced Life Safety Solutions Advanced Life Safety Solutions
U.S.A.
60 Industrial Parkway
Cheektowaga, NY 14227
Tel: 1-888-660-4655 Fax: 1-888-660-4113
UIMA Windows Driver Installation Instructions
1
UIMA Windows Driver Installation Instructions
There are two important components to installing the UIMA on your computer, Installing the USB Serial Convertor
and Installing the USB Serial Port. Also included are instructions on Verifying that Windows Recognizes the USB
Serial Convertor and Port. The drivers for both the USB Serial Convertor and USB Serial Port are included on the
accompanying CD ROM.
Installing the USB Serial Convertor Driver
Step 1: Insert CD Driver Disk for Adapter product in the CD-ROM Drive.
Step 2: Connect the adapter to a spare USB port on your PC, and find
the new hardware wizard
Step 3: The following screen will show
Select the circled Converter Product Driver
Step 4: Select No, not this time
Click Next to continue
UIMA Windows Driver Installation Instructions
2
Step 5: Select Install from a list or specific location (Advanced)
Click Next to continue
Step 6: Select Search removable media (floppy, CD ROM…)
Click Next to continue
Step 7: Auto search for the corresponding driver in the CD
UIMA Windows Driver Installation Instructions
3
Step 8: You will now see two options which are available to install
Choose the USB 2.0 TO RS232 Converter driver
Click Next to continue
Step 9: The wizard has started installation and will copy the required
files to your system
Step 10: Click Finish to close the wizard
Installing the USB Serial Port
Step 11: Find new com port
UIMA Windows Driver Installation Instructions
4
Step 12: Select No, not this time
Click Next to continue
Step 13: Select Install from a list or specific location (Advanced)
Click Next to continue
Step 14: Select Search removable media (floppy, CD-ROM…)
Click Next to continue
Step 15: Auto search for the corresponding driver in the CD
UIMA Windows Driver Installation Instructions
5
Step 16: Choose the correct type of the driver to match the version
of Windows that your computer is using
2000, XP, or Vista
Click Next to continue
Step 17: The wizard has started installation and will copy the
required files to your system
Step 18: Installation completed
Click Finish to close the wizard
Step 19: Your new hardware is installed and ready to use
UIMA Windows Driver Installation Instructions
6
Verifying that Windows Recognizes the USB Serial Convertor and Port
Step 20: To Verify that Windows has porperly recognized your USB
Serial Convertor and Port, right click My Computer and then
click Properties.
Step 21: Select Device Manager in the Hardware of the interface
System Properties
Step 22: Here you can view the hardware devices installed on your computer
UIMA Windows Driver Installation Instructions
7
Remarks
After installation, if you can see USB Serial Converter from the
Device Manager but cannot see USB Serial Port (COM X) please
complete the folowing steps
Step 24: Right click USB Serial Converter
Click Properties
Step 25: Select Load VCP in the Advanced tab
Click OK
UIMA Windows Driver Installation Instructions
8
Step 26: Unplug USB TO RS232 Adapter on your computer
Reconnect the device to USB port on your PC again
Please refer to the following chart verify that it is installed correctly
Step 27: Installation finished
Congratulations, installation is successful
Canada
25 Interchange Way
Vaughan, ON L4K 5W3
Tel: 905-660-4655 Fax: 905-660-4113
© Mircom 2009
Printed in Canada
Subject to change without prior notice
www.mircom.com
Advanced Life Safety Solutions
U.S.A.
4575 Witmer Industrial Estates
Niagara Falls, NY 14305
Tel: 1-888-660-4655 Fax: 1-888-660-4113
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Mircom LT-929 UIMA Installation guide

LT-929 UIMA
Mircom
Brand
Mircom
Model
LT-929 UIMA
Type
Installation guide

Mircom LT-929 UIMA is a USB to RS-485/232 converter that allows for communication between a computer and devices using RS-485 or RS-232 protocols. It supports data transfer rates up to 921.6 Kbps and is compatible with Windows 2000, XP, and Vista. The device is easy to install and comes with necessary drivers on the included CD-ROM. It also features a convenient Load VCP option for troubleshooting and supports both RS-485 and RS-232 connections.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents