General information
This convertor is a IDE to S-ATA converter. If there is no IDE
connection free in the computer system, but there are free
S-ATA connections, you can use this convertor to convert
your IDE hard disk or CD-ROM player to a S-ATA device. Now
this device can be connect to the free S-ATA controller.
The convertor is quite small (58 x 25 mm) and takes hardly
any space while using it.
Specifications
Interface: CardBus
Used For: SATA, eSATA, IDE
Sales information
Order code:
CMP-SATACONV11
Product description: IDE - S-ata converter
Packaging: Blister
Brand name: König
Quantity LxWxH (mm) Weight
1 155x60x175 63 gr.
50 400x280x530 4340 gr.
IDE - S-ata converter
Information is subject to change without prior notice. Contents may differ from what is shown. Supplier can not be held responsible, nor liable for the information contained
in this document. This document was generated at 23/12/2014 17:32:38
Page: 1 of 1
/