2. Mircom
  3. LT-929 UIMA
LT-929 UIMA

Mircom LT-929 UIMA Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Mircom LT-929 UIMA Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What are the two components to installing the UIMA on a computer?
    Where can I find the drivers for the USB Serial Convertor and USB Serial Port?
    What is the first step in installing the USB Serial Convertor Driver?
    How do I verify that Windows recognizes the USB Serial Convertor and Port?
    What should I do if I can see the USB Serial Converter from the Device Manager but cannot see the USB Serial Port (COM X)?
Canada
25 Interchange Way
Vaughan, ON L4K 5W3
Tel: 905-660-4655 Fax: 905-660-4113
Mircom 2002
Printed in Canada
Subject to change without prior notice
www.mircom.com
UIMA
USB TO RS-485/232 CONVERTOR
LT-929 Rev. 3
March 2009
Windows Driver Installation Instructions
Advanced Life Safety Solutions Advanced Life Safety Solutions
U.S.A.
60 Industrial Parkway
Cheektowaga, NY 14227
Tel: 1-888-660-4655 Fax: 1-888-660-4113
UIMA Windows Driver Installation Instructions
1
UIMA Windows Driver Installation Instructions
There are two important components to installing the UIMA on your computer, Installing the USB Serial Convertor
and Installing the USB Serial Port. Also included are instructions on Verifying that Windows Recognizes the USB
Serial Convertor and Port. The drivers for both the USB Serial Convertor and USB Serial Port are included on the
accompanying CD ROM.
Installing the USB Serial Convertor Driver
Step 1: Insert CD Driver Disk for Adapter product in the CD-ROM Drive.
Step 2: Connect the adapter to a spare USB port on your PC, and find
the new hardware wizard
Step 3: The following screen will show
Select the circled Converter Product Driver
Step 4: Select No, not this time
Click Next to continue
UIMA Windows Driver Installation Instructions
2
Step 5: Select Install from a list or specific location (Advanced)
Click Next to continue
Step 6: Select Search removable media (floppy, CD ROM…)
Click Next to continue
Step 7: Auto search for the corresponding driver in the CD
UIMA Windows Driver Installation Instructions
3
Step 8: You will now see two options which are available to install
Choose the USB 2.0 TO RS232 Converter driver
Click Next to continue
Step 9: The wizard has started installation and will copy the required
files to your system
Step 10: Click Finish to close the wizard
Installing the USB Serial Port
Step 11: Find new com port
UIMA Windows Driver Installation Instructions
4
Step 12: Select No, not this time
Click Next to continue
Step 13: Select Install from a list or specific location (Advanced)
Click Next to continue
Step 14: Select Search removable media (floppy, CD-ROM…)
Click Next to continue
Step 15: Auto search for the corresponding driver in the CD
UIMA Windows Driver Installation Instructions
5
Step 16: Choose the correct type of the driver to match the version
of Windows that your computer is using
2000, XP, or Vista
Click Next to continue
Step 17: The wizard has started installation and will copy the
required files to your system
Step 18: Installation completed
Click Finish to close the wizard
Step 19: Your new hardware is installed and ready to use
UIMA Windows Driver Installation Instructions
6
Verifying that Windows Recognizes the USB Serial Convertor and Port
Step 20: To Verify that Windows has porperly recognized your USB
Serial Convertor and Port, right click My Computer and then
click Properties.
Step 21: Select Device Manager in the Hardware of the interface
System Properties
Step 22: Here you can view the hardware devices installed on your computer
UIMA Windows Driver Installation Instructions
7
Remarks
After installation, if you can see USB Serial Converter from the
Device Manager but cannot see USB Serial Port (COM X) please
complete the folowing steps
Step 24: Right click USB Serial Converter
Click Properties
Step 25: Select Load VCP in the Advanced tab
Click OK
UIMA Windows Driver Installation Instructions
8
Step 26: Unplug USB TO RS232 Adapter on your computer
Reconnect the device to USB port on your PC again
Please refer to the following chart verify that it is installed correctly
Step 27: Installation finished
Congratulations, installation is successful
Canada
25 Interchange Way
Vaughan, ON L4K 5W3
Tel: 905-660-4655 Fax: 905-660-4113
© Mircom 2009
Printed in Canada
Subject to change without prior notice
www.mircom.com
Advanced Life Safety Solutions
U.S.A.
4575 Witmer Industrial Estates
Niagara Falls, NY 14305
Tel: 1-888-660-4655 Fax: 1-888-660-4113
/