Delfield 8145-EF Datasheet

8145-EF
Delfield
Brand
Delfield
Model
8145-EF
Category
Food warmers
Type
Datasheet

This manual is also suitable for

Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
LiquiTec™ Cold Pans with Eutectic Fluid technology allows
food in food pans to be flush with top of counter. Cold pan
meets NSF standard 7; and can be dropped into Delfield Mark
7, Shelleyglas® or Shelleysteel™ counters or existing counters.
Top: is one-piece 18-gauge stainless steel, with 0.62” (1.6cm)
overhang around perimeter and die stamped 19.87” x 11.87”
(50cm x 30cm) openings with depressed edges. Formed well
below each opening is 6.25” (16cm) deep with 0.5” (1.3cm)
stainless steel drain and copper manifold. Each well, flush
with the top, for flush mount pans to accommodate 12” x 20”
(30cm x 51cm) pans 4” (10cm) or 6” (15cm) deep supplied by
others. Product temperatures of 33°F (1°C) to 41°F (5°C) are
maintained at 86°F (30°C) ambient room temperature, meeting
NSF 7 requirements.
Sides and bottom: are insulated with high-density
environmentally friendly, Kyoto Protocol Compliant, Non
ODP (Ozone Depletion Potential), Non GWP (Global Warming
Potential) closed-cell polyurethane. Exterior housing is 24-
gauge galvanized steel.
Refrigeration: system uses HFC-404A refrigerant. Eutectic
fluid is used as the heat transfer medium. Condensing unit
is suspended below the cold pan on a 16-gauge steel frame.
Temperature control is supplied with an ON/OFF switch. Unit
is supplied with expansion valve.
A stainless steel louver is provided for field installation; cutout
dimension is 11” x 22” (28cm x 56cm). A second opening 11”
x 22” (28cm x 56cm) at the rear of the cabinet should be
provided at installation to allow for proper air circulation.
Electrical system is 115V/60Hz/1Ph with NEMA 5-15P plug.
Units have a toggle ON/OFF switch.
Specifications
Standard Features
Options &
Accessories
18-gauge stainless steel top construction
2BF stainless steel liner wrapped and spot
clipped with refrigeration lines; thermal transfer
compound is applied for superior cooling
Flush mounted die stamped drawn 12” x 20”
individual 20-gauge wells
Wells to be depressed slightly into the top to
hold condensation
Standard 1/2” stainless steel drains with
manifold
High density environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming Potential)
polyurethane foam insulation throughout unit
Galvanized exterior body
Thermostatic temperature control and
expansion valve standard
Non-marring press fit top gasket
Condensing unit is suspended below on a 16-
gauge galvanized frame
Environmentally friendly HFC-404A refrigerant
8’ cord and plug
Stainless steel louver for field installation
One year parts and 90 day labor standard
warranty
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8118-EF One 12” x 20” pan capacity
8132-EF Two 12” x 20” pan capacity
8145-EF Three 12” x 20” pan capacity
8159-EF Four 12” x 20” pan capacity
8172-EF Five 12” x 20” pan capacity
8186-EF Six 12” x 20” pan capacity
•
•
•
•
•
•
Models
8100-EF
Drop-In Self-Contained LiquiTec™ Refrigerated Cold Pans
8100-EF: Drop-In Self-Contained LiquiTec™ Refrigerated Cold Pans
Single or double service flip-up
sneezeguards
Relocate compressor
Remote refrigeration (specify
refrigerant)
Drain valve
•
•
•
•
8132-EF
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
8100-EF
Drop-In Self-Contained LiquiTec™ Refrigerated Cold Pans
Printed in the U.S.A.
DS8100EF
01/11
Deleld reserves the right to make changes to the design or specications without prior notice.
Specifications
Model Counter Cutout Dimensions
12”x20” Pan
Capacity
V/Hz/Ph Amps H.P.
Nema
Plug
Ship Weight
8118-EF 17.00" X 25.00" (43cm X 64cm) 1 115/60/1 7.0 1/4 5-15P 180lbs/82kg
8132-EF 30.75” x 25.00” (78cm x 64cm) 2 115/60/1 7.0 1/4 5-15P 225lbs/103kg
8145-EF 44.25” x 25.00” (112cm x 64cm) 3 115/60/1 7.0 1/4 5-15P 235lbs/107kg
8159-EF 57.87” x 25.00” (147cm x 64cm) 4 115/60/1 7.0 1/4 5-15P 285lbs/130kg
8172-EF 71.50” x 25.00” (182cm x 64cm) 5 115/60/1 7.0 1/4 5-15P 295lbs/134kg
8186-EF 85.00” x 25.00” (216cm x 64cm) 6 115/60/1 7.0 1/4 5-15P 306lbs/139kg
Plan View
8172-EF
Plan View
8186-EF
Elevation View
8172-EF
Elevation View
8186-EF
Right End View
All Models
Inside Well Dimension
All Models
Elevation View
8132-EF
Elevation View
8145-EF
Elevation View
8159-EF
Plan View
8132-EF
Plan View
8159-EF
23.25"
(58cm)
23.25"
(58cm)
23.25"
(58cm)
19.87"
(51cm)
23.25"
(58cm)
23.25"
(58cm)
26.00"
(66cm)
26.00"
(66cm)
26.00"
(66cm)
Plan View
8145-EF
26.00"
(66cm)
31.76"
(81cm)
45.32"
(115cm)
26.00"
(66cm)
58.88"
(150cm)
72.44"
(184cm)
86.00"
(218cm)
24.62"
(63cm)
11.87"
(30cm)
44.03"
(112cm)
57.59"
(146cm)
71.09"
(181cm)
84.65"
(215cm)
30.47"
(77cm)
15.69"
(40cm)
23.25"
(59cm)
18.20"
(46cm)
26.00"
(66cm)
10.37"
(26cm)
16.91"
(43cm)
Elevation View
8118-EF
Plan View
8118-EF
10.37"
(26cm)
10.37"
(26cm)
10.37"
(26cm)
10.37"
(26cm)
10.37"
(26cm)
7.55"
(19cm)
Btu Requirements For
Remote Units Only:
*Low temp condensing unit required.
Model #
8118-EF
8132-EF
8145-EF
8159-EF
8172-EF
8186-EF
BTU
292
379
569
758
948
1138
  • Page 1 1
  • Page 2 2

Delfield 8145-EF Datasheet

8145-EF
Delfield
Brand
Delfield
Model
8145-EF
Category
Food warmers
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents