Delfield 8118-EF Specification

Type
Specification

This manual is also suitable for

Short Form
Specifications
General Definition: LiquiTec
Cold Pans with Eutectic Fluid
technology allows food in food
pans to be flush with top
of counter. Cold pan meets
NSF standard 7; and can be
dropped into Delfield Mark 7,
Shelleyglas
®
or Shelleysteel
counters or existing counters.
Top: is one-piece 18-gauge
stainless steel, with .62” (1.57cm)
overhang around perimeter and
die stamped 19.87” x 11.87”
(50.5cm x 30.2cm) openings
with depressed edges. Formed
well below each opening is
6.25” (15.9cm) deep with .5”drain
manifold to gate valve. Each
well, flush with the top, for flush
mount pans to accommodate
12” x 20” (30.5cm x 50.8cm)
pans 4” (7.6cm) or 6” (15.2cm)
deep supplied by others. Product
temperatures of 33°F (1°C) to
41°F (5°C) are maintained at
86°F (30°C) ambient room
temperature, meeting NSF 7
requirements.
Sides and bottom: are
insulated with high-density
closed-cell polyurethane.
Exterior housing is 22-gauge
galvanized steel.
Refrigeration: system uses
HFC-404A refrigerant. Eutectic
fluid is used as the heat transfer
medium. Condensing unit is
suspended below the cold pan
on a 16-gauge steel frame.
Temperature control has an OFF
position to shut down the cold
pan. Unit is supplied with
expansion valve.
A stainless steel louver is
provided for field installation;
cutout dimension is 11” x 22”
(27.94cm x 55.88cm). A second
opening 11” x 22” (27.94cm x
55.88cm) at the rear of the
cabinet should be provided at
installation to allow for proper air
circulation.
Electrical system is 115/60c/1ph
with NEMA 5-15P plug.
Optional Accessories
and Modifications:
Single or double service flip-up
sneezeguards
Relocate compressor
Remote refrigeration
(specify refrigerant)
LiquiTec
Drop-In Self-Contained Eutectic Fluid Refrigerated Cold Pans
Model 8186-EF
8100-EF
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. (800) 733-8821 Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
PROJECT _____________________________________
ITEM NUMBER_________________________________
QUANTITY _______________ DATE________________
APPROVAL____________________________________
MODEL COUNTER CUTOUT # OF 12” X 20” VOLTS/HERTZ/ NEMA SHIP WEIGHT
NUMBER DIMENSIONS PANS HELD PHASE AMPS H.P. PLUG LBS/KG
8118-EF
17.5" X 25.2" (78.74cm X 64cm) 1 115/60/1 7.0 1/4 5-15P 180/82
8132-EF
31 x 25.2” (78.74cm x 64cm) 2 115/60/1 7.0 1/4 5-15P 225/103
8145-EF
44.5” x 25.2” (113cm x 64cm) 3 115/60/1 7.0 1/4 5-15P 235/107
8159-EF
58” x 25.2” (147.3cm x 64cm) 4 115/60/1 7.0 1/4 5-15P 285/130
8172-EF
71.5” x 25.2” (181.6cm x 64cm) 5 115/60/1 7.0 1/4 5-15P 295/134
8186-EF
85.2” x 25.2” (216.4cm x 64cm) 6 115/60/1 7.0 1/4 5-15P 306/139
Mechanical Data Standard Unit
PLAN VIEW
8172-EF
PLAN VIEW
8186-EF
ELEVATION VIEW
8172-EF
ELEVATION VIEW
8186-EF
RIGHT END VIEW
ALL MODELS
INSIDE WELL DIMENSION
ALL MODELS
ELEVATION VIEW
8132-EF
ELEVATION VIEW
8145-EF
ELEVATION VIEW
8159-EF
PLAN VIEW
8132-EF
PLAN VIEW
8145-EF
PLAN VIEW
8159-EF
23.25"
(59CM)
23.25"
(57.7CM)
23.25"
(57.7CM)
19.87"
(50.5CM)
23.25"
57.7CM
23.25"
(57.7CM)
26"
(66CM)
26"
(66CM)
26"
(66CM)
26"
(66CM)
26"
(66CM)
31.76"
(80.7CM)
45.32"
(62.6CM)
58.88"
(115.1CM)
72.44"
(184CM)
86"
(218.4CM)
24.62"
(62.6CM)
11.87"
(30.2CM)
BTU REQUIREMENTS FOR
REMOTE UNITS ONLY:
MODEL #
8118-EF
8132-EF
8145-EF
8159-EF
8172-EF
8186-EF
BTU
292
379
569
758
948
1138
44.03"
111.8cm
57.59"
146.3 cm
71.09"
(180.57CM)
84.65"
215cm
30.47"
77.4cm
15.69"
39.9cm
23.25"
59.1cm
18.20"
(46.22CM)
26"
(66CM)
10.37"
(16.91CM)
16.91"
(42.95CM)
ELEVATION VIEW
8118-EF
PLAN VIEW
8118-EF
10.37"
26.3cm
10.37"
26.3cm
10.37"
26.3cm
10.37"
26.3cm
10.37"
26.3cm
7.55"
19.2cm
LiquiTec
Drop-In Self-Contained Eutectic Fluid Refrigerated Cold Pans
8100-EF
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. (800) 733-8821 Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
DS8100EF 01/02
  • Page 1 1
  • Page 2 2

Delfield 8118-EF Specification

Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI