VMware vCenter Application Discovery Manager 6.2.2 User guide

Application Discovery Manager

Administration Guide

vCenter Application Discovery Manager 6.2.2

This document supports the version of each product listed and

supports all subsequent versions until the document is replaced

by a new edition. To check for more recent editions of this

document, see http://www.vmware.com/support/pubs.

EN-000546-02

VMware, Inc.

3401 Hillview Ave.

Palo Alto, CA 94304

www.vmware.com

2 VMware, Inc.

Application Discovery Manager Administration Guide

You can find the most up-to-date technical documentation on the VMware Web site at:

http://www.vmware.com/support/

The VMware Web site also provides the latest product updates.

If you have comments about this documentation, submit your feedback to:

docfeedback@vmware.com

intellectual property laws. VMware products are covered by one or more patents listed at

http://www.vmware.com/go/patents.

VMware is a registered trademark or trademark of VMware, Inc. in the United States and/or other jurisdictions. All other marks

and names mentioned herein may be trademarks of their respective companies.

VMware, Inc. 3

Contents

AboutThisBook 7

1 Overview 9

SystemArchitecture 9

DistributedApplianceSolutions 11

VirtualandPhysicalApplianceSolutions 11

VirtualApplianceDeployment 11

PhysicalApplianceDeployment 12

MirroredNetworkTraffic 12

vCollector 12

MixedEnvironment 13

WhereToGoNext 13

InstallationofNeworAdditionalADMComponents 13

Licenses 13

UpgradingADM 13

MigratingtoaNewAppliance 13

Security 13

2 InstallingADM 15

ADMInstallationRequirements 15

InstallationPersonnel 15

ESXResources 15

InstallingthevSphereClient 16

DisablingvMotion 16

PreparingtheEnvironment 17

PreparinganESXConfiguration 17

DeployingtheVirtualAppliances 18

DeployingtheADMVirtualAppliances 19

InstallingWindowsCollector 20

3 SettingUpADM 23

Process 23

OrderofSetup 23

ADMSetupProcedures 23

LaunchingtheFirstBootConfigurationTool 24

ConfiguringtheRootPassword 24

ConfiguringStaticNetworkSettings 25

ConfiguringtheTimezoneandTime 25

ConfiguringtheApplianceRole 26

Post‐InstallationSteps 27

ActiveDirectoryConfiguration 27

LoggingintotheADMConsole 28

InitiatingPassiveDiscovery 28

Application Discovery Manager Administration Guide

4 VMware, Inc.

4 SecuringADM 31

ChangingtheRootPassword 31

ResettingtheADMRootPassword 31

OpenSSLSelf‐SignedTestCertificates 32

CASignedTestCertificates 32

Self‐SignedCertificates 32

5 Maintenance 35

ADMServices 35

ProductSupportPackages 36

UsingtheADMConsole 37

UsingtheCLI 37

RestoringanADMEnvironmentbyUsingaProductSupportPackage 38

ReconfiguringanADMDeployment 40

AddingaRemoteDatabasetoanExistingADMDeployment 40

ConvertingaSingle‐BoxorAggregatortoaRemoteDatabase 40

MovingaDatabasetoaRemoteAppliance 41

Licenses 41

UploadingaLicense 42

6 UpgradingADM 43

Overview 43

ApplianceType 43

MixedEnvironments 43

Licenses 43

ApplianceMigration 43

BackingUpData 43

UpgradingAppliances 44

ImportantNotes 44

PreliminaryProcedures 44

UpgradingAppliancesUsingCLI 44

Post‐UpgradeSteps 46

7 MigratingtoaNewAppliance 47

Overview 47

SupportedMigration 47

Licenses 47

SystemArchitecture 47

Process 48

PreliminaryProcedures 48

DataRestoration 49

Single‐BoxSolution 49

DistributedSolutions 49

DistributedSolutionwithRemoteDatabase 50

Post‐MigrationSteps 50

8 TroubleshootingADM 51

TroubleshootingADMbyUsingtheProductSupportPackage 51

TroubleshootingErrorMessagesDuringWMIDiscovery 51

DetailDiscoveryTroubleshooting 51

UsingADMConsole 52

WMI 52

VMware, Inc. 5

Contents

single.sh 52

snmpdump 55

nlcapture 55

9 UninstallingADM 57

UninstallingtheADMAppliance 57

A TimeZones 59

B ADMAPITutorial 61

APIFeatures 61

Insight_control 61

AsynchAPI 62

DumpAPI 62

BulkAPI 63

WebServicesAPI 63

Index 65

Application Discovery Manager Administration Guide

6 VMware, Inc.

VMware, Inc. 7

TheVMwarevCenter™ApplicationDiscoveryManager(ADM)AdministrationGuideprovidesinformation

thattheadministratorsarerequiredtoinstallandconfiguretheADM.

Intended Audience

ThisdocumentispartoftheVMwarevCenterApplicationDiscoveryManagerdocumentationset,andis

intendedforusebysystemadministratorsandintegratorsresponsibleforinstallingADM.

TheinstallationproceduresinthisdocumentmustbeperformedbyITprofessionalsfamiliarwith

virtualizationandVMwaretechnologiessuchasVMwareESX™serversand

relatedvirtualandphysical

equipment.

VMware Technical Publications Glossary

VMwareTechnicalPublicationsprovidesaglossaryoftermsthatmightbeunfamiliartoyou.Fordefinitions

oftermsastheyareusedinVMwaretechnicaldocumentationgotohttp://www.vmware.com/support/pubs.

Document Feedback

VMwarewelcomesyoursuggestionsforimprovingourdocumentation.Ifyouhavecomments,sendyour

feedbacktodocfeedback@vmware.com.

Technical Support and Education Resources

Thefollowingsectionsdescribethetechnicalsupportresourcesavailabletoyou.Toaccessthecurrentversion

ofthisbookandotherbooks,gotohttp://www.vmware.com/support/pubs.

Online and Telephone Support

Touseonlinesupporttosubmittechnicalsupportrequests,viewyourproductandcontractinformation,and

registeryourproducts,gotohttp://www.vmware.com/support.

Customerswithappropriatesupportcontractsshouldusetelephonesupportforthefastestresponseon

priority1issues.Gotohttp://www.vmware.com/support/phone_support.

Support Offerings

TofindouthowVMwaresupportofferingscanhelpmeetyourbusinessneeds,goto

http://www.vmware.com/support/services.

About This Book

Application Discovery Manager Administration Guide

8 VMware, Inc.

VMware Professional Services

VMwareEducationServicescoursesofferextensivehands‐onlabs,casestudyexamples,andcoursematerials

designedtobeusedason‐the‐jobreferencetools.Coursesareavailableonsite,intheclassroom,andlive

online.Foronsitepilotprograms andimplementationbestpractices,VMwareConsultingServicesprovides

offeringsto helpyouassess,plan,

build,andmanageyourvirtualenvironment.Toaccessinformationabout

educationclasses,certificationprograms,andconsultingservices,gotohttp://www.vmware.com/services.

VMware, Inc. 9

1

ThischapterdescribesthedifferentVMwarevCenterApplicationDiscoveryManager(ADM)architecture

solutionsandconfiguration.Thischapterincludesthefollowingtopics:

 “SystemArchitecture”onpage 9

 “VirtualandPhysicalApplianceSolutions”onpage 11

 “vCollector”onpage 12

 “MixedEnvironment”onpage 13

 “WhereToGoNext”onpage 13

System Architecture

TheADMprovidessystemarchitecturesolutionstomeettherequirementsofdifferentenvironmentsas

showninFigure 1‐1.

Figure 1-1. ADM Components

VMwareprovidesADMononeormoreappliances.Themodeoftheappliancedetermineswhichcomponent

isrunning.ADMcomponentsaredescribedinTable 1‐1.

Overview

1

AggregatorDatabase

Active

Discovery-Unix

Active

Discovery-Windows

Passive

Discovery

Application Discovery Manager Administration Guide

10 VMware, Inc.

Single-Box Appliance

InaSingle‐Boxappliancesolutionarchitecture,theADMcomponentsareenabledonasingleVirtual

Appliance(VA)asshowninFigure 1‐2.

Figure 1-2. Single-Box Appliance Architecture

Chapter 3providestheconfigurationinstructions.

Table 1-1. ADM Components

Component Description

ActiveDiscovery‐UNIX Collectsdatafromtheconfigurationobjectsinyourdatacenter.Thefollowingdiscovery

typesapply:

 IPdiscovery:Amethodfordetectinghostsorotherconfigurationitemswitha

specificIPaddresswhenPassiveDiscoveryfailstodiscoverthem.

 Detaildiscovery:ExtendstheinformationobtainedusingPassiveandIPDiscovery.

Itusescommonnetworkprotocolstoremotelyqueryserversinthemanaged

networkandobtainssupplementaryinformationaboutnetworkhostswhichis

addedtothedatabase.

ActiveDiscovery‐Windows AdiscoveryenginethatusesWMIbaseddiscoverypoliciesforperformingactive

discoveryonWindowsmachines.

PassiveDiscovery Passivelyobservesthenetworktrafficbyperformingadeep‐packetanalysistodiscover

applicationsandcomponentrelationshipsinphysicalandvirtualenvironments.

Italsoallowsyouto:

 Mapdependencies.

 Counttheactivityofthesedependencies.

 Identify services.

Aggregator Receivesdatafromthediscoverycomponentsandreconcilesthedatabeforetransferring

ittothedatabasecomponent.Theaggregatoralsoprovidestheuserinterfaceforusing

ADMandistheintegrationpointforvariousintegrations,forexample,ERDB.

Database AnOracleRDBMSusedforstoringdiscovereddataandADMconfiguration.

Database

ESX1

ADM VM2

Active Discovery-

Windows

Runs on (Virtualization)

Logical monitoring

port connectivity

ADM Connectivity

Physical

switch 2

Physical

switch 1

Active Discovery-

Unix

Aggregator

Passive

Discovery

vSwitch

ADM VM1

Role = single-box

Role=Windows collector

(running Win2008

on any ESX)

VMware, Inc. 11

Chapter 1 Overview

Distributed Appliance Solutions

ThedistributedappliancesolutionhasatleastonedesignatedapplianceenabledasaCollector,andanother

applianceenabledasanAggregatorandDatabaseasshowninFigure 1‐3.

Figure 1-3. Distributed Appliance Solution

Virtual and Physical Appliance Solutions

YoucansetupADMeither:

 OnyourESXorESXiserversasdescribedin“VirtualApplianceDeployment”onpage 11

 OnexistingIBMphysicalappliances,onlyupgradingissupportedasdescribedin“UpgradingADM”on

page 13.

Virtual Appliance Deployment

ADMversion6.2.2isdeliveredasVA,whichisavirtualmachineimagethatincludesanoperatingsystemand

therelevantADMsoftwarecomponentsinstalledonit.AVAcanrunoneormultipleADMcomponents

dependingontheapplianceroleselected.

DeployingavirtualmachinetemplateinanOpenVirtualization

Format(OVF)ontotheESXorESXiserver

createsanADMVirtualAppliance.Afterdeployment,poweruptheVAandthenconfigurethestandard

appliancesettings,network,anduserinformation.

N

OTEInaDistributedwithremotedatabasesetup,thereisadesignatedappliancetohostthedatabase.Also,

PassiveandDetailDiscoverycanrunonsingleormultipleCollectors.

Database

ESX1

ADM VM6

Active Discovery-

Windows

vSwitch

Role = Windows Collector

(running Win2008

on any ESX)

ADM VM3

Passive

Discovery

Active Discovery-

Unix

Runs on (Virtualization)

Logical monitoring

port connectivity

ADM Connectivity

Physical

switch 2

Physical

switch 1

Aggregator

vSwitch

ADM VM1

Role = Aggregator

Role = collector

ADM VM4 ADM VM4

vSwitch

Role = Collector

ESX3

Active Discovery-

Unix

Passive

Discovery

Passive

Discovery

vSwitch

Role = Passive collector

ESX2

ESX4

Application Discovery Manager Administration Guide

12 VMware, Inc.

DownloadthefollowingartifactsfromtheVMwareWebsite:

http://downloads.vmware.com/Application Discovery Manager



CoreADMTemplate:AnOVFtemplatethatincludesallADMcomponentsexceptfortheWindows

CollectorandyoucanconfigureasAggregator,Aggregatorwithremotedatabase,Database,or

Single‐Box.

 CollectorADMTemplate:AsmallerOVFtemplatethatincludesthePassiveCollectorandActiveand

PassiveCollectorandyoucanconfigureaspassiveandactivediscoveryCollectorandPassiveDiscovery

Collector.

 WindowsCollectorInstaller:AnexecutablefilethatinstallstheWindowsCollectorcomponentontopof

theWindows2008R2operatingsystems.

Physical Appliance Deployment

ADMsupportstheupgradingofexistingIBMsingleboxandDistributedsolutions(includingthosethatuse

aremotedatabase).

Mirrored Network Traffic

Themethodinwhichtheapplianceperformspassivediscoveryisbyanalyzingmirroredtrafficfromaswitch

orrouter.Networkdevicesthathavetheabilitytoconfigureamirroredport(sometimescalledasaSwitched

PortAnalyzer,spanportormonitorport)canforwardacopyofallthenetworktraffic

fromall(orselected)

portstooneormoremirroredports.Typically ,eachnetworkdevicehasallitsportsmirroredtooneport.These

mirroredportsarethenconnecteddirectlytooneofthenetworkinterfacesontheESXserver.

Performoneofthefollowingstepsifyouhaveto

connectmultiplemonitorports:

 Connectthemonitorportstoanaggregateswitch(A‐Switch),whichisalsoconfiguredwithamonitor

port.PlugthemirroredportoftheA‐SwitchintotheESXservernetworkinterface.

ContactyourVMwareSalesRepresentativeifyourequireanA‐Switch.

 AddfewmorenetworkinterfacestoESXserver.

 InstallanotherADMPassiveCollectoronadifferentESXserver.

vCollector

TheADMusesavirtualcollector(vCollector)tolistentocommunicationbetweenvirtualmachinesthatrun

onthesameVMwareESXServer.AvCollectorispresentinsideavirtualmachineanditslistenercollectsthe

informationaboutthevirtualmachinesdeployedontheESXServer.BydeployingavCollector,theADM

is

abletopassivelydiscoverdependenciesinavirtualizedenvironment.Youcanthenviewinformationabout

thevirtualmachinesthataredeployedonthesameESXServerincluding:

 Dependencymapsbetweenvirtualmachines.

 Activitycountsofthedependencies.

 Servicesrunningonthevirtualmachines.

 Additionalinformationthatisofferedbythelistener.

I

MPORTANTConsultITprofessionalsofyourorganizationtoensurethattheappropriateswitchesorrouters

thatcontainsthenetworktrafficisusedforDiscoveryareconfiguredproperlyforportmirroringandare

accessibletotheADMappliance.

N

OTETheADMPassiveCollectorcanworkwithmaximumofthreemonitorports.Ifyouhavetoconnect

morethanthreemonitorports,youmustaddanotherADMPassiveCollector.

VMware, Inc. 13

Chapter 1 Overview

Mixed Environment

TheADM6.2.2releaseintroducesADMasavirtualappliance,butitalsosupportsupgradingfrom6.0ona

physicalIBMappliances.Youcanupgradeyourphysicalenvironmentwithadditionalvirtual6.2.2appliances

likemixedenvironment.ThisadditionalvirtualappliancecanplayaroleofPassiveCollectors(vCollectors)

oranadditional

PassiveandActiveCollectors.

.

Where To Go Next

Thissectionprovideslinksthatcontainsmoreinformationonthetopicslisted.

Installation of New or Additional ADM Components

ContinuebyconfiguringinitialappliancesettingsasdescribedinChapter 2.

Licenses

YouneedanewlicensetouseADMafterupgradingormigrating.ObtainthelicensefromyourVMwareSales

representative.Formoreinformation,see“Licenses”onpage 41.

Upgrading ADM

ContinuewithupgradeproceduresasdescribedinChapter 6.

Migrating to a New Appliance

ContinuewithmigrationproceduresasdescribedinChapter 7.

Security

FormoreinformationonADMsecurity,seeChapter 4..

NOTEAllADMappliancesthatparticipateinmixedenvironemntmodemustrunthesame6.2.2versionof

theADM.

Application Discovery Manager Administration Guide

14 VMware, Inc.

VMware, Inc. 15

2

ThischapterdescribesinstallationanddeploymentoftheADM.Thischapterincludesthefollowingtopics:

 “A D M InstallationRequirements”onpage 15

 “DisablingvMotion”onpage 16

 “PreparingtheEnvironment”onpage 17

 “DeployingtheVirtualAppliances”onpage 18

 “InstallingWindowsCollector”onpage 20

ADM Installation Requirements

ADMisanappliancethatcanruninaVMwareinfrastructure.Thissectioncontainsrequirementsthatmust

bemetbeforeyouinstallandusetheADMappliance.

Installation Personnel

TheinstallationproceduresinthisdocumentmustbeperformedbyITprofessionalsfamiliarwith

virtualizationandVMwaretechnologiessuchasESXserversandrelatedvirtualandphysicalequipment.

ESX Resources

TousetheADMappliance,youmustinstalltheADMapplianceonaVMwareESXserverversion3.5orlater.

ConfigurethevirtualmachineonyourESXserveraccordingtothedeploymentmodelwithresourcesas

describedinTable 2‐1.

Installing ADM

2

Table 2-1. Virtual Appliance Deployments

ADM Virtual Appliance (VA) Memory (GB) Number of vCPUs NICs Disk (GB) OVF Template

Single‐Box 4 4 4 80 Core

Aggregator+DB 4 4 1 80 Core

Aggregator 3 2 1 80 Core

Database 3 2 1 80 Core

PassiveCollector 2 1 4 8 Collector

LinuxActive+PassiveCollector 4 2 4 8 Collector

WindowsActiveDiscovery

Collector

21 120NA

NOTEVMwareprovidesWinApeinstallerinsteadofOVFtemplateforWindows2008R2(Datacenter,

Enterprise,andStandard)operatingsystemsthathoststheWinApe.

Application Discovery Manager Administration Guide

16 VMware, Inc.

Installing the vSphere Client

InstallthevSphereclienttoworkwithVMwareenvironment.

To download and install the vSphere Client

1 LaunchInternetExplorerbrowser.

2Intheaddressbar,typetheIPnumberoftheESXServerwherethevirtualmachineisinstalled,for

example:

https://ESX Server IP

3ClicktheDownloadvSphereClientlink,andthensavetheclientexecutablefiletoyourlocalharddisk.

4Runtheexecutablefile.

5AcceptthelicenseandclickNext.

6Typetheusernameandorganizationdetailsiftheydonotappearbydefault.ClickNext.

7Atthenextscreen,clickNextwithoutselectingInstallvSphereHostUpdateUtility.

8Ifdifferentfromthedefault,specifytheinstallationfolder,andthenclickNext.

9ClickInstall.

10 ClickFinishtoclosethewizard.

Disabling vMotion

To disable automatic vMotion

1InthevSphereclient,selectthecluster,right‐clickonitandselectEditSettings.

2IntheVMwareDRSsection,selectVirtualMachineOptions.

3 SelecttheADMvirtualappliances.

4 SelectDisablefromtheAutomationLevellistbox.

5ClickOK.

N

OTEADMsupportsWindowsInternetExplorer6.0andlaterbrowsers.

N

OTEThevSphereclientinstallationcantakeseveralminutes.

IMPORTANTADMvirtualappliancesarenotsupportedbyvMotion.IftheADMvirtualapplianceisinstalled

onaVMwareDRScluster,performthefollowingstepstodisableautomaticvMotion.

VMware, Inc. 17

Chapter 2 Installing ADM

Preparing the Environment

PerformthefollowingproceduresbeforeyousetuptheADM.

Preparing an ESX Configuration

CreateandconfigureanewvSwitchforeachphysicalspanport.Repeatthefollowingproceduresforeachnew

vSwitch.

Creating a New vSwitch for Passive Discovery

To create a new vSwitch for Passive Discovery

1 ConnectthemonitorportstoavailablenetworkinterfacesontheESXserver.

2 ConnecttotheESXserverorvCenterbyusingvSphereclient.

3 NavigatetotheConfigurationtabontheESXserverwhereyouwanttodeployADMappliances.

4 Navigatetothenetworkingconfigurationoption.

5ClickAddNetworkingtoopentheAdd

networkwizard.

6 SelectconnectiontypeasVirtualMachine,andclickNext.

7 SelectthevmnicthatisconnectedtothemonitorportonthephysicalswitchandclickNext.

8Specifyanetworklabel,forexample,spanport,forthenewportgroupandclickNext.

9ClickFinish.

Configuring the vSwitch General Settings for Passive Discovery

To configure the vSwitch general settings for Passive Discovery

1OpenthenewvSwitchPropertieswindow.

2 SelectthevSwitchandclickEdit.

3 NavigatetotheSecuritytabandchangethePromiscuousModefromRejecttoAcceptandclickOK.

4Clickthenetworkadapterstab,selecttherelevantvmnicandclickEdit.

5 ChangetheConfiguredSpeed,Duplexto10MB,FullDuplex

.

6ClickOKandthenClose.

Configuring the vSwitch for Passive Collector

Connect the Passive Collector to a port group. To define a port group

1 CreateaportgroupinthevSwitchasfollows:

aLogintotheESXServerorvCenterusingvCenterClient.TheVirtualInfrastructureClientscreen

appears.

bClicktheConfigurationtab.

c SelectNetworkingfromtheHardwarelist.

dFromtheprecedingscreen,selectProperties.

e SelectPortsandclickAdd.

f SelectVirtualMachineandclick

Next.

I

MPORTANTPerformthefollowingstepstoconnecttovSwitchesthatspantheinternaltraffic

betweenvirtualmachinesrunningontheESXServer.

Application Discovery Manager Administration Guide

18 VMware, Inc.

gSettheNetworkLabel,forexample,ADMspanportandclickNext.

hVerifythattheportgroupislisted,andclickFinish.

2 ChangethePromiscuousModetoAccept.ThisvalueissettoRejectbydefault.

a Selecttheportgroupthatyoucreated;forexample,ADMspanport.

bClickEditandselectSecuritytab.

c SelectPromiscuousMode,andthenselectAcceptfromthelistbox.

dClickOKandthenClose.

Configuring dvSwitch for Passive Collector

IfavirtualmachineisdirectlyconnectedtothenetworkandnotthroughthevSwitch,thephysicalCollector

observesthetraffic,whilethevSwitchdoesnot.ThisistermedasVMDirectPath.

 Software‐basedCiscoNexusswitchesaresupported.

 ThisprocedureisrelevantonlyforvSphere4andnotforESX3.5.

To create a port group in the dvSwitch

1LogintothevCenterserverwithvCenterclient.

2ClickConfigurationandthenselectNetworkingfromtheInventorytab.

3 SelectDistributedvSwitch.

4OntheConfigurationtab,selectNewPortGroup.

5ConfiguresupportforallVLANsbyenteringthedetailsontheCreateDistributedVirtualPortGroup

windowasshowninTable 2‐2.

.

6ClickNexttofinishandreturntothedvSwitchNetworkConfigurationscreen.

7 SelecttheADMspanportgroupandclickProperties.

8ClicktheSecuritytabontheADMspanportPropertieswindow.

9 SelectPromiscuousMode,andthenselectAcceptfromthelistbox.

10 ClickOKandthenClose.

Deploying the Virtual Appliances

TheADMvirtualappliancecontainsandrunsoneormoreofthefollowingcomponents:

 Aggregator

 Database

 ActiveDiscoveryUNIX

 PassiveDiscovery

“SystemArchitecture”onpage 9describestheappliancearchitecture.

PerformthefollowingproceduresbyusingaWindowsmachinewithremoteaccesstotheESXserver.

Table 2-2. VLAN Support

Parameter Value Specified

Name Anameforportgroup(ADMspanport).ThenamemustbesameasinvSwitchprocedure.

Numberofports OneforeachESXindatacenter

VLANtype VLANTrunking

VLANID 0‐4094

VMware, Inc. 19

Chapter 2 Installing ADM

Deploying the ADM Virtual Appliances

VirtualappliancesareinstalledontheESXserveraccordingtheconfigurationsinTable 2‐3.

Before You Begin

Ensureallrequirementsaremetasdescribedin“ESXResources”onpage 15.

Deployment Procedure

RepeatthefollowingstepsoneachADMvirtualappliance,excepttheWindowsCollectorthatisinstalled

separatelyasdescribedin“InstallingWindowsCollector”onpage 20:

1 DownloadtheADMvirtualappliancefilesfromVMwareWebsiteandextractthefilestoalocalfolder.

TheextractedZipfilesincludeanOVFand

aVMDKfile.

TheVAfilesareinZipformatwiththefollowingnamingconvention:

OVFTemplate ‐buildnumber

where:

 OVFTemplate isasdescribedinTable 2‐3.

 buildnumberistheADMversionandbuildnumber.

2LogintotheESXserverbyusingthevSphereclient.

3IntheFilemenu,selectDeployOVFTemplate.BrowsetotheOVFfileandselectit.

Table 2-3. Virtual Appliance Configuration

Appliance Type OVF Template Includes Component(s)

Aggregator ADMCore Aggregator

Database

Single‐Box ADMCore Aggregator

Database

PassiveDiscovery

UNIXActiveDiscovery

Database ADMCore Database

Aggregatorwithremote

database

ADMCore Aggregator

PassiveDiscoveryCollector ADMCollector PassiveDiscovery

PassiveandActive

DiscoveryCollector

ADMCollector UNIXActiveandPassiveDiscovery

NOTEInstallaseparateWindowsCollectorusinganinstallationwizardasdescribedin

“InstallingWindowsCollector”onpage 20.

IMPORTANTPerformanceofADMCollectorsisaffectedbydistanceandnetworklatencybetweenthe

Collectorsandobjectsbeingdiscovered.Formoreinformation,seeVMwarevCenterApplicationDiscovery

ManagerPeformanceandScalabilityGuide.

N

OTEYoucandeployADMcomponentsinanyorderorevensimultaneouslybyusingthevSphereclient.

I

MPORTANTEnsurethatthebuildnumberisidenticalforallappliancesdeployed.

N

OTEIfanSSLCertificateWarningmessageappears,clickIgnore.

Application Discovery Manager Administration Guide

20 VMware, Inc.

4ClickNext.TheOVFTemplateDetailsscreenappears.

5ClickNext.TheNameandLocationscreenappears.

6TypeauniquevirtualappliancenameaccordingtotheITnamingconventionofyourorganizationand

withrelevancetotheappliancetypeasdescribedinTable 2‐3.

7ClickNext.TheDatastorescreenappears.

8ClickNext.TheNetworkMappingscreenappears.

9ClickNext.TheReadytoCompletescreenappears.ItdisplaysdetailsabouttheOVFfile,sizefor

downloadandsizewhenextracted,virtualappliancename,hostorcluster,datastoreandnetwork

mapping.

10 ClickFinishtoconfirmthesettingsandbeginthedeployment.

11 Click

Closeinthemessagedialogboxwhendeploymentsuccessfullycompletes.

12 Repeatthisprocedureuntilallcomponentsaredeployed,andthencontinuewith“InstallingWindows

Collector”onpage 20.

Installing Windows Collector

Before You Begin

EnsurethattheWindowsmachineonwhichtheCollectorisbeinginstalledmeetstheminimumrequirements

asdescribedin“ESXResources”onpage 15.

Deployment

To deploy Windows Collector on a Windows machine

1 DownloadtheVMwarevCenterADMWindowsCollectorexecutablefilefromVMwareWebsitetoyour

localWindowsmachine.

2Double‐clicktheexecutablefile.

TheInstallShieldWizardscreenappears.

3ClickNext.TheLicenseAgreementscreenappears.

4Readthelicense,selectIacceptthetermsofthelicenseagreement,andclickNext.

TheChoose

InstallationFolderscreenappears.

5Ifyouwanttochangethedefaultinstallationlocation,clickChangeandselectthepreferredinstallation

directory.

6ClickNext.TheHostInformationscreenappears.

N

OTEIfthereismorethanonedatastore,selectthedatastorewhereyouwanttoinstallthevirtual

machine.

N

OTETheprocessofcopyingandconfiguringtheADMcomponentcantakeseveralminutes.The

deploymentandconfigurationstatusappearsinamessagedialogboxandtheRecentTaskspane.

NOTEIfawarningappearsaboutanunknownpublisher,clickRuntoproceed.

N

OTEUsethescrollbartoviewallofthelicensetext.Ifyoudonotwanttoacceptthelicense,youwill

bepromptedtoconfirmthisbeforetheinstallationprogramcloses.

NOTEThedefaultinstallationpathis:C:\Program Files\VMware\ADM.

Page is loading ...

VMware vCenter Application Discovery Manager 6.2.2 User guide

Related papers

Other documents