2. JasonL
  3. QDL1407.W.ME

JasonL QDL1407.W.ME, QDL1407.W.WT, QDL1607.W.ME, QDL1607.W.WT, QDL1807.W.ME, QDL1807.W.WT Operating instructions

  • Hello! I've analyzed the assembly instructions for the Quadro Loop L-Shaped Desk. This document details the step-by-step process, from attaching plastic brackets to legs to securing the tabletop. I'm ready to answer any questions you have about the desk's assembly process or its components.
  • What tools are required for the assembly?
    How many people are required for installation?
    What sizes are available for the desk?
ASSEMBLY INSTRUCTIONS
Quadro Loop
L-Shaped Desk
Sizes: 1200, 1400, 1600, 1800 mm
Page 1 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
ASSEMBLY INSTRUCTIONS
Quadro Loop
L-Shaped Desk
Sizes: 1200, 1400, 1600, 1800 mm
Table top x1
Table top Return x1
Legs Quadro x2
Legs Quadro Loop x3
Legs Quadro Return x1
Beam x1
Beam Return x1
Plastic bracket x6
Joiner plates x2
A
B
C
D
E
F
G
H
I
Allen key x2O
M8x20MM CSK x3
M8x20MM Socket head x4
M6x20MM Socket head x6
M6x30MM Socket head x8
Join plates Screws
J
K
L
M
N
COMPONENTS
SCREWS
Page 2 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
F
G
H
I
J K L M N
A
B
C
E
D
K
L
ASSEMBLY INSTRUCTIONS
Quadro Loop
L-Shaped Desk
Sizes: 1200, 1400, 1600, 1800 mm
STEP 01
Using Allen Key provided, attach 2 plastic brackets (H) per legs
(C & E) (as per picture above) using M6x20MM (L) Socket head
screw. Connect Loop Legs (D) to Bottom of Quadro Legs (C & E)
by using 4 bolts per leg.
Using Allen Key provided, attach M8x20MM Socket head (K)-
screw socket half way into leg for three legs (C & E)
STEP 02
Page 3 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Quadro Loop
L-Shaped Desk
Sizes: 1200, 1400, 1600, 1800 mm
STEP 03
Adjust extendable beam (F) to desired
length using markers and secure beam
at that length using screws provided
Page 4 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50
ASSEMBLY INSTRUCTIONS
Quadro Loop
L-Shaped Desk
Sizes: 1200, 1400, 1600, 1800 mm
STEP 04
TOP VIEW
Attach beam (F) to legs (C) using nut insert in legs.
See point attached
Frame looks like this. Using Allen Key, attach beam (F) with Socket (J)
STEP 05
Page 5 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
J
J
ASSEMBLY INSTRUCTIONS
Quadro Loop
L-Shaped Desk
Sizes: 1200, 1400, 1600, 1800 mm
STEP 06
Now attach the return beam (G) to return leg (E) using nut insert in legs. See point attached.
Then, connect the hook of the return beam to the beam of the main structure.
Page 6 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
J
G
E
N
I
B
ASSEMBLY INSTRUCTIONS
Quadro Loop
L-Shaped Desk
Sizes: 1200, 1400, 1600, 1800 mm
STEP 07
Page 7 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Attach Connector Plates (I) to Return Top (B) by tightening Screws (N)
ASSEMBLY INSTRUCTIONS
Quadro Loop
L-Shaped Desk
Sizes: 1200, 1400, 1600, 1800 mm
STEP 08
Page 8 of 8
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Place table top (A) ontop of frame. Using nut inserts in the desk, use M6x30mm socket (M) and attach desktop to
the frame. Using nut inserts in the desktop, use M6x30mm socket (M) and attach desktop (B) to the frame. Once
desktop are attached and secure to the frame, use woods screws and secure joiner plates to the underside of
desktop A.
TABLE TOP
BOTTOM VIEW
M
I
N
B
A
nut insert nut insert
nut insertnut insert
/