The Collection by Argos FRENCH DINING & 6 User manual

Brand: The Collection by Argos

Model: FRENCH DINING & 6

Type: User manual

This manual is also suitable for

The Collection by Argos FRENCH DINING & 6 is a stylish and comfortable chair, perfect for any dining room. It is easy to assemble and maintain, and is made from high-quality materials.

The chair has a sturdy metal frame and a comfortable cushioned seat and back. It is also height-adjustable, so you can find the perfect position for your comfort. The chair is also easy to clean, so you can keep it looking its best for years to come.

Here are some of the features and possible use cases of the The Collection by Argos FRENCH DINING & 6:

Comfortable seating: The chair has a cushioned seat and back, making it comfortable to sit in for long periods of time.

The Collection by Argos FRENCH DINING & 6 is a stylish and comfortable chair, perfect for any dining room. It is easy to assemble and maintain, and is made from high-quality materials.

Here are some of the features and possible use cases of the The Collection by Argos FRENCH DINING & 6:

Comfortable seating: The chair has a cushioned seat and back, making it comfortable to sit in for long periods of time.

Assembly is complete.

Width - 45cm

Depth - 55cm

Height - 92cm

Assembly Instructions - Please keep for future reference

Dimensions

French southwold chair

After the sitting test,

re - tighten bolts again,

if any adjustment needed.

It is highly recommend

to re - tighten all the bolts

again after using the chair

for 7 days.

Note : Please keep the

allen key to re - tighten

all bolts again when

required.

Assembly Instructions

606/9942

Important

- Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline:

Argos = 0345 640 0800

Issue 1 - 17/09/16

If you need help or have damaged or missing parts, call the Customer Helpline:

Argos = 0345 6400800

Step 2

Assembly Instructions

Screw the lock seats

with hand screw driver

by following the pre drilled

holes.

Tighten all bolts.

Note : Stand the chair on

a level floor.

Sit on the chair to

the legs.

Pre-drilled

hole

Safety and Care Advice

Important – Please read these instructions fully before starting assembly

Care and maintenance

• Check you have all the

components and tools listed on

page 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Make sure you have enough

space to layout the parts before

starting.

• Dispose of all packaging

carefully and responsibly.

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household waste.

Take to your local authority

waste disposal centre.

• Maximum safe weight of

user: 110 Kgs.

Handy Hints

• Assemble all parts and bolts

loosely during assembly, only

once the product is complete

should you fully tighten the bolts.

• Reguraly check and ensure

that all bolts and fittings are

tightend properly.

• Do not stand or put weight on

the product during assembly,

this could cause damage.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor.

• Parts of the assembly will be

easier with 2 people.

• Do not stand on the chair.

• Do not use the chair as step

ladder

• Assemble the item as close

to its final position (in the same

room) as possible.

• To reduce

the likelihood of

damaging your

product please

ensure that your

power drill is set on a low torque

setting.

Components - Parts

Please check you have all the parts listed below

Chair back x 1

Seat x 1

Right side rail x 1 Front leg frame x 1

BACK

Assembly Instructions

Stand the chair on a

floor. Insert bolts with

spring washers and

washers through side

rails holes into front leg

frame screw all bolts

by using ball allenkey .

Place the seat pad

on the table. Put the

chair frame on top of the

seat back.

BACK

Left side rail x 1

Note :The quantities below are the correct amount to complete the assembly of 1 chair.

If you have damaged or missing components, call the

Customer Helpline:

Argos = 0345 6400800

BACK

Components -

Fittings

Please check you have all the fittings listed below

Note :The quantities below are the correct amount to complete the assembly of 1 chair. In some cases more

fittings may be supplied than are required.

50 mm Bolt x 8

Spring washer x 8

Washer x 8

Lock seat x 2

19 mm Screw x 4

Ball allenkey x 1

Tools required

Phillips screwdriver

(medium & large)

Assembly Instructions

Step 1

Put left side rail into

left side hole of the chair

back and right side rail

into right side hole.

Insert bolt with spring

washers and washers

through side rails holes

into the chair backs.

Screw all bolts by using

ball allenkey .

Do not fully tighten.

Fit the front leg frame

onto the right and left

side rails .

Ruler - Use this ruler to help correctly identify the screws

100 20 30 40 50 60 70 80 90 100

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100

110 115 120 125 130 135 140 145 150 155 160 165 170

105

The screws length is measured from the head to the point (30mm screw shown).

Right side rail

Left side rail

BACK

pre - drilled hole

BACK

The Collection by Argos FRENCH DINING & 6 User manual

Brand: The Collection by Argos

Model: FRENCH DINING & 6

Type: User manual

This manual is also suitable for

The Collection by Argos FRENCH DINING & 6 is a stylish and comfortable chair, perfect for any dining room. It is easy to assemble and maintain, and is made from high-quality materials.

Here are some of the features and possible use cases of the The Collection by Argos FRENCH DINING & 6: