Hygena HYG BENI PAIR OF CHAIRS GREY, BENI CHAIRS GREEN, BENI CHAIRS GREY, Beni Pair of Dining Chairs, HYG BENI PAIR OF CHAIRS User manual

  • Hello! I am an AI chatbot trained to assist you with the Hygena HYG BENI PAIR OF CHAIRS GREY User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
HYGENA BENI PAIR OF CHAIRS
Assembly Instructions - Please keep for future reference
459/6118 (D)
461/0269 (D)
Dimensions
Width - 44 cm
Depth - 56 cm
Height - 86.5 cm
Issue 2 - 5/03/14
Important Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Argos Aftersales
Helpline: 0345 640 0800
1
Safety and Care Advice
Important Please read these instructions fully before starting assembly
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
Check you have all the
components and tools listed on
the following pages.
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
During assembly do not stand
or put weight on the product,
this could cause damage.
Assemble the item as close
room) as possible.
Assemble on a soft level
surface to avoid damaging the
Parts of the assembly will be
easier with 2 people.
To reduce
the likelihood of
damaging your
product please
ensure that your
power drill is set on a low torque
setting.
Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
From time to time check that
there are no loose screws on
this unit.
This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts
Regularly check and ensure
tightend properly.
Handy Hints
Components - Panels
Please check you have all the panels listed below
2
Leg x 1
2
Seat x 1
1
3
M6*20mm x 4
A
Note:
may be supplied than are required.
Components - Fittings
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
105
The screws length is measured from the head to the point (30mm screw shown).
Tools󳴆require d
Allen key
4
Argos Aftersales Helpline 0345 640 0800
Assembly Instructions
Step 1
a:
Fitting the leg
Use bolt to attach leg 2
to seat 1
with correct
Step 2
Finishing the Unit
1
2
A
Carefully place the unit in
the desired location.
A
Assembly is complete.
FRONT
orientation.
/