14664

PHOEBE LED 14664 User guide

  • I've analyzed the user manual for the PHOEBE Smart Relay Switch 14664. This document covers the installation process, safety precautions, and app setup. The device supports both traditional and LED/fluorescent lamps and can be controlled via Wi-Fi, app or voice control. I'm ready to answer your questions about the Relay Switch 14664.
  • What is the maximum load for traditional lamps?
    What is the maximum load for LED and fluorescent lamps?
    How to control the Smart Relay Switch?
Part Number:
Safety Warning
To avoid the risk of re, electrical shock or injury, we recommend that installation is carried out by a qualied electrician.
Max load (Do not exceed max load on device)
Traditional lamps 600W max, LED and Fluorescent lamps 400W max.
Before use please carefully read wiring instructions. Before commencing any electrical work ensure power supply is switched off at
the mains. Either by switching off the consumer unit or by removing the appropriate fuse. Wiring should be in accordance with the
latest IEE regulations (BS 7671).
Mains Input 1. Disconnect power by circuit breaker
2. Check the line with voltage tester pen, make sure the
power is off to prevent electric shock
3. Follow wiring diagram and check for short circuits
4. Connect circuit breaker and restore power
Smart Relay Switch - Setup
Wi and App Controlled 14664
Output/Device
App Set-up
1. Download the Tuya Smart App from Google Play or the Apple App Store
2. Connect your smart device to a 802.11 b/g/n 2.4GHz network
3. Launch the Tuya App
4. Power on after completion of wiring and the device is turned on by default. Press and hold the
button for about 3-5 seconds until the WIFI blue LED blinks fast
5. Select add device (Manually or auto detect) and choose “Socket (Wi-Fi)” from device type
6. Follow the Tuya app on-screen instructions for step by step new device set-up
Voice Control
The Smart Relay Switch can be controlled by voice control via the Tuya App or Smart Home Hub.
To connect your Smart Relay Switch to your home hub please follow your home hub set-up
instructions for adding a new Tuya Smart Device.
Crompton Lamps Limited registered in England and Wales No. 05590551
Registered ofce and correspondence address: Unit 2, Marrtree Business Park, Bowling Back Lane, Bradford BD4 8QE
Tel: +44 (0)1274 657 088 Fax: +44 (0)1274 657 087 Email: [email protected] Web: www.cromptonlamps.com
Voice
Control
/