2. Crystorama
  3. 8856-PN

Crystorama 8856-PN User manual

  • I am a chat assistant and I have reviewed the Assembly Instruction document for CRYSTORAMA Chandelier model 8856-PN. This document provides details on how to assemble and install the chandelier, including the type of bulbs needed and important safety warnings. I'm ready to answer any questions you may have about the device or its assembly.
  • What type of bulbs are needed for this chandelier?
    Can I use any type of bulb?
    Is the product safe to use?
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
®
ASSEMBLY INSTRUCTION MODEL #8856-PN
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
You will need 6-Candelabra Bulb
60 watts Max Bulb not included
USE LED BULBS FOR EXTENDED USE
This fixture is DRY rated
How to Install
28″
17″
90″
15″
1.Decide the preferred hanging height and choose the
chain needed.
2.Fix the mounting plate to the ceiling and connect the
canopy to the mounting plate.
3.Install the recommended bulbs (not included).
Ø5.7″
Part Number
Part Numbers
PART NUMBER MODEL #8856-PN
A
B
C
D
E
F
G
H
I
J
K
L
A.Mounting Hardware
(1)Mounting Plate
(2)Wire Nut
(2)Outlet Box Screws
B.(1)Screw Collar Loop
C.(1)Canopy;Ø5.7″x1″h;XMO8854PNCAN1IN
D.(1)Collar Ring
E.(2)Quick Link
F.(1)Chain;72″Lx Ø5.0mmT;XMO8854PNCHA5MM
G.(1)Loop
H.(1)Top Ring
I.(12)Crystal Column
J.(1)Center Rod
K.(6)Candle Sleeve
L.(1)Bottom Ring
/