2. AcuityBrands
  3. L-Type Track Adapter
L-Type Track Adapter

AcuityBrands L-Type Track Adapter Installation guide

  • Hello! I have analyzed the provided document which is an Installation Instructions for the Juno L-Type Track Adapter Option. This document contains instructions on how to properly install the adapter, using its latch and polarity line. I can answer your questions about the installation or features described in this guide.
  • How do I insert the adapter into the track?
    What tool is needed to adjust the contact?
    Which contact is adjustable?
INSTALLATION INSTRUCTIONS
For L-Type Track Adapter Option
1300 S. Wolf Road • Des Plaines, IL 60018 • 800-323-5068 •www.acuitybrands.com
©2017 Acuity Brands Lighting, Inc. Rev 4/18 P4678
1 of 1
Find the latch and the polarity line. Align
parts as shown below and insert the
adapter box into the track.
Latch on adapter Rotate in the direction
of the "Install" arrow
Continue to rotate until the latch snaps
in place between the two track rails. Final Position
Latch snaps into place between rails
Second Circuit Positioning
1. Hold onto Adapter Box with one hand
2. Place the end of a flat head screw driver under the contact shown below
3. Gently pull up, the contact should move vertically until hitting a hard stop
4. Follow instructions for inserting into track
Ground contact
Final Position
SAVE THESE INSTRUCTIONS
Find contact above the ground contact.
This is the only contact that is adjustable.
Polarity line
Continue to depress latch until
final position
Coming Soon
/