2. Juno
  3. P4677

Juno P4677 User manual

  • I've reviewed the provided Installation Instructions for the H-Type Adapter. The document outlines the steps for correctly installing the adapter into track lights system including aligning, rotating and securing it using latch and adjusting second circuit contact using a flat head screwdriver. I'm ready to answer any questions you may have.
  • How do I insert the adapter box into the track?
    How do I rotate the adapter box?
    What should I do after rotating the adapter box?
    How to adjust the contact for the second circuit?
INSTALLATION INSTRUCTIONS
For H-Type Adapter
1300 S. Wolf Road • Des Plaines, IL 60018 • 800-323-5068 •www.acuitybrands.com
©2017 Acuity Brands Lighting, Inc. Rev 4/18 P4677
1 of 1
Find the latch and the polarity line.
Align parts as shown below and
insert the adapter box into the track
Rotate the adapter box opposite
the arrows until the latch snaps in
place between the two track rails Final Position
SAVE THESE INSTRUCTIONS
Polarity Line
Latch on
adapter box
Continue to depress
latch until final position Latch snaps into place
between rails
Second Circuit Positioning
1. Hold onto Adapter Box with one hand
2. Place the end of a flat head screw driver under the contact shown below
3. Gently pull up, the contact should move vertically until hitting a hard stop
4. Follow instructions for inserting into track
Place flat head under the contact
Final Position
Rotate adapter
box opposite
the arrows
Coming Soon
/