AcuityBrands H-TYPE Installation guide

Hello! I've reviewed the Installation Instructions for the H-Type Adapter. This document provides a detailed guide on how to install the adapter, including aligning parts, inserting the adapter box into the track, and positioning the second circuit. I'm ready to answer your questions about the installation process.
Where is the latch located on the adapter box?

What does the document say about the polarity line?

What tool is used to adjust the contact in the second circuit positioning process?

INSTALLATION INSTRUCTIONS

For H-Type Adapter

1300 S. Wolf Road • Des Plaines, IL 60018 • 800-323-5068 •www.acuitybrands.com

1 of 1

Find the latch and the polarity line.

Align parts as shown below and

insert the adapter box into the track

Rotate the adapter box opposite

the arrows until the latch snaps in

place between the two track rails Final Position

SAVE THESE INSTRUCTIONS

Polarity Line

Latch on

adapter box

Continue to depress

latch until final position Latch snaps into place

between rails

Second Circuit Positioning

1. Hold onto Adapter Box with one hand

2. Place the end of a flat head screw driver under the contact shown below

3. Gently pull up, the contact should move vertically until hitting a hard stop

4. Follow instructions for inserting into track

Place flat head under the contact

Final Position

Rotate adapter

box opposite

the arrows

Coming Soon