2. Roma Heating
  3. SMART LIFE
SMART LIFE

Roma Heating SMART LIFE User guide

  • Hello! I'm a chat assistant trained to help you with the provided user manual for the SmartLife Connection Wi-Fi Thermostat. I've reviewed the document, which includes instructions on how to connect the thermostat to the Smart Life app, how to prepare the device for pairing and troubleshooting tips. Feel free to ask me any questions about the setup process or other aspects outlined in the manual and I will do my best to assist you.
  • How do I prepare the thermostat for pairing?
    What if only the cloud symbol appears?
    What to do if the thermostat fails to connect to the app?
Download the Smart Life app
from the IOS or Android Store.
And create a unique account and
password.
In the home screen of smart life.
Press on the area highlighted to add
a thermostat to the App.
On the next screen please select small home appliances and then search the
list until you reach thermostat (Wi-).
Select your Wi-Fi network and enter
the Password for your router at home.
Press Next.
To get the thermostat ready to pair to
device/app, hold Set & OK buttons on
the thermostat until both cloud & wi-
symbol appear ashing together.
If cloud only appears then let go and
then press Set & OK button again until
both symbols appear on left of screen.
Please also make sure device is reset
rst. Once both symbols appear on
screen of thermostat, select blink
quickly after tapping next on reset the
device screen (see screen shot).
Wi-Fi Thermostats SmartLife Connection
Thank you for purchasing one of our products and for your support.
1 2
3
4 5
The thermostat should now
pair to the device.
If the thermostat fails to connect to the
thermostat then repeat steps 2,3 and 4.
hold down the Set and OK button until
the cloud symbol only appears on the
thermostat screen.
Select blink slowly at the bottom left of
screen on the smartlife app.
Press go to connect on next page.
This should take you directly Into your phone settings (See Below).
If not then exit app (Don’t Close) and go into settings as shown on
below (Middle Screenshot).
Then select Smart Life in ‘my Networks’ or ‘wi Fi Network’
You should then be directed back to the app. If not go back into the app and the countdown
screen should appear.
The thermostat should now pair to the device.
6 7
8
9
ANDROID APP IOS APP
/