Smart Watches GT22 User guide

Brand: Smart Watches

Model: GT22

Type: User guide

Smart Watches GT22: Your Guide to a Healthier, More Connected Lifestyle

With its advanced health and fitness tracking features, Smart Watches GT22 empowers you to take control of your well-being. Monitor your heart rate, blood pressure, and blood oxygen levels, and receive notifications when your readings fall outside normal ranges. Track your steps, distance, and calories burned during workouts, and choose from a variety of sports modes to accurately monitor your activities.

Beyond health tracking, Smart Watches GT22 also offers a range of smart features to enhance your daily life.

Smart Watches GT22: Your Guide to a Healthier, More Connected Lifestyle

Beyond health tracking, Smart Watches GT22 also offers a range of smart features to enhance your daily life.

The watch willbe fully charged about two hours The screen shows 100% that means the

battery s fully charged.

Ifthe watch Prompt"charging error"or"please replace' that means the charging contact is

1 Appearance&function introduction ECG detection

Connect phone

3 Charging instructions

LPower on/off

1.Turn on the Bluetooth switch of the phone and watch.

2.Connect Bluetooth data function:Open the FunDo Health app and open the app related

permissions according to the prompts in the pop-up box.Click devicesAdd device available

select and click GT22 in the device ist and then the watch and mobile phone wl autom-

atically start binding and pairing and synchronize data.

3.Connect to the watch Bluetooth call or connect to the mobile function;Turn on the watch's

Bluetaoth callor connect to the phone function,then open the phone settngs s Bluetooth

select and click call-watch in the searched list the connection s successful.

Measurement methods:

1.Wear the device with tight wrists, make suethat the metalelectrodes on the back of the

device are fully attached to the skin do not have foreign objects blocking them do not

deviate fram the suspension, and maintain a calm state.

2.Select the ECG application in the application ist to enter the ECG test interface.Cick the

setting icon on the interface to choose the wearng method (left-handed or ight-handed)

Keep your finger in cantact with the electade pad af the down button (as shown n the

figure),and the measurement wllstart automaticaly.

3.After the measurement is campleted,click Finish,and you can viewthe detailed ECG

The accessory that comes with the watch is a magnetic chargng cable.Connect the USB head

of the charging cable to the power charger produced by a reguar manufacturer orthe USB

port of the computer Align the charging feed point of the magnetic suction line with the

charging feed point of the watc in the correct direction for adsorpton untlthe Charging

instruction interface appears on the watch screen. When the watch is ultra low battery it needs

to continue charging for about 1 minute to display the charging status on the screen,

incorrect please replace the watch.

Power on

Funstonkey APP download

Ouick start Long press the power button to stat the watch in shutdown state.

When starting with utra-low power cannect the charger to charge the watch for 1 minute

before startng.

ECG Flectrad

Android users:

1.Searching for FunDo Health in the mobile application market dawnoad and nstal the

FunDo Health APP

2.Scan the QR code below or the QR code of the watch to downlaad and installthe FunDo

Health APP

Health sens0r Tuchxn

S0e

Smart wearable device Power off

Mt-

ECGElectrade ti20

Long press the power button to shut off the watch n power-on state.

After ultra-low battery vbration reminder, the watch wilautomaically shu down.

Chagrg prt collection recard report an the ECG detection application on the mobile phone.

Device GT22

lOS users:

1.Log into the App Store an the mobie phone and search far FunDo Health to dowmload

and install the FunDo Health APP.

2. Scan the QR code below ar the QR code afthe watch to download and install the FunDo

Fower button/ECGElectrode add device

(BACK) Reset Health APP

In the power-on state enter the functon menu and seect Settngss Reset

After restoring the factory settings,the watch willrestart automatcaly

and al user data of the watch willbe cleared after the restart.

Bonded device

Please use the special charging cable included in the package to charge

Please make sure the charging contacts of the watch are clean and complete

before charging

Please use a regular manufacturers charger with a rated output voltage of 5V/0.2Aar above

Long pessthe dalon thedad inertaceo

sutththeda

Long-press Click ChoosgBConfrm The watch supports BT3.0and BT4.0,so bluetooth needs to be connected twice.

When connecting you need to turn on the sharing system notification n the Buetooth details

settings of the mobile phone

In order to extend the battery life,the Bluetooth 3.0 callfunction willautomatically sleep,and

willautomatically wakeup when an incoming call or acallis made.

Touch Sldodown the daon the diintetcg to

bromse the shortut menu Slldeup 51u10emer hefuncion ky on the dal

rtertcd

Slide down

instruction Eadk5carghtta dal on the dil nefacg

to erter Siebgr Side ltthedalon the dal narace tana

the furctin nterfac

Slde ight Side leit or a computer USB port

Warranty message

Do not subject the device and ts accessories to strong shocks or vibrations,so as not to

damage the device and it's accessaries and cause the device to mafunction

Please avoid using the device in the environment of hot sun, high tempeature humidity and

open flame accessories

Donotuse strong chemicals,detergents orstrong detergentsto clean the deviceor its

accessaries,

Donot allowchildren or animals tocheworswallow the device,

This form is prepared in accordance with the provsions of SJ/T11364

O It means that the content ofthis hazardous substance n al homogeneous materials of this

part is under the limit equirements stipulated in GB/T26572.

X It means that the content of the hazardous substance in at least one homogeneous material

af the component exceeds the limit requirements stipulated n GB/T26572,and thee is

currently no mature alternative in the industry, which meets the environmenta protection

requirements ofthe EU RoHS directive

The heart rate,ECG body temperature blood pessure, blood oxygen and other heath sign

data inwolved n this product can only be used as an auxllary reference for medica diagnosis Part name Warranty perod

Precautions: Environmental protection Service warranty Card

When measuring,please wear the devce normally, avodjoints,and not be too loose,5o as

not to affect the measurement results due to the shaking of the colector

During the measurement process, please keep your body still put your arms on the table or

your knees and relax your arms and fingers.At the same time,do not let go of the electrodes

with your fingers and make moderate contact with the electrodes to avoid excessive pressng

or nsufficient contact.

If the skinis too dry please wet your finger with asmallamount of water before measuring;

please keep the surface of the device dry, and if there s water stain,wipe it dry before

measuring

Asingle measurement lasts 30 seconds

Half ayear limited Warranty Delivery

Watch(Not including watch strap)

Please do nat dispose of this device and its accessories as ardinary househod waste. Model; Cvent name

Warmming

Please comply wth locallaws and regulatons regarding the handlng of this device and its

accessories, and support recyding operatons, Delivery

Magnetc Charging Cabe Half a year limited Warranty Client contact no. Purchase date:

5ales contact no.

Nat Under Warranty

Others(incudng watch strap/gfts)

Protection level Vendor(stamp)

Clent address

The watch meets he p67 pratection leve requirements and is suitable for daiy waterproofing

such as hand washing and rain.

Name and content of hazardous substances Disclaimer Sales address.

tis prohibited to usein water activities such as diving,swimming poals and coastalswmming.

It is prohibited to use in hot water showers,hot springs saunas(steam ooms) diving water sking,

other wading actiites and deep water actvities facing high-speed water flow.

It can prevent dust condtions such as iving room ofice laboratory light ndustria studio,storage

foom,etc. It s prohibited o use in specia dust erwironment.

Please check whether the following v s eady before etuning or replacing the goods or sending

them to be repaired.

After-sales service

Hazardous substances The contents of this manual are prowided according to the status quo.Unless required by

applicable law the company does not provide any express or implied guarantees for al contents

in this manual,ncluding but not limited to the guarantee of marketability or for a specific purpose.

To the extent permitted by applcable aws the company wllnot use the eevant contents of this

manua and the products described in this manua under any circumstances.Compensation shall

be made for any special,incidental,indirect or secondary damages arising from the praduct,and

no profts,data,compensation shal be made for loss of goodwillor anticipated savings.

To the extent permitted by he reevant aws in any case the companys maximum liabilly for the

losses you suffer from using the products described n ths manua is imted to the price you pay

for the purchase of this product(Except for damagesin accordance with applicable aws in cases

invalving persona njury).

Attention:

Partname Please contact the after-sales service of the sales affice ar point of purchase. Non-man-made

quality problems are guaranteed for half a year. The product warranty start date is based on the

date of inwoice or receipt.Artificalqualty problems include but arenot imted to thefolowng

situations;

1.Failure caused by unauthorized dsassembly and reassembly of watches

2.Damage due to negligence or misuse.For example the host enters the water, the externalforce

bursts,accidentally falls the casng is scratched or damaged.

3.Please pravde a warranty card with the date af purchase and stamped with the sealof the place

of purchase or an invoice or receipt stamped with the sea of he place of purchase Those who

cannot provide the above proof wil not be enttled to free warranty.

Hg Watch and

accessories complete

Pb Cr(Vl) PBB Giftbox unopened

PBDE This warranty card is only applicable to the three-guarantee service of the host wth the serial

number listed above

Please keep this warranty certificate properly,and pease showthis certifcate and invoce or

receipt when enjayng the three guarantees service

This certificate needs to be stamped by the sales unit before it becomes effective.

Man-made damage s nat coveed by the warraty.

Gifts

Invoice

Returned

purchase y

OOOO

Watch cases Maintenance

Please keep the equipment and its accessoies dry.Don't dry t with externa heating equip-

ment such as microwave oven or hair dryer

Please use norma temperature cean water cleaning equipment regularly to avoid dirtand

bacteria.

Returned

purchase y

OOOO

Battery y

Service

Watch strap OOOOQConlory

Desktop

charger The information is for reference only and

is subject to change without notice!

OOOOO Do not place the device and its accessories in areas where the temperature is too high or too

low.Otherwise the devce may malfunction, catch fire, or explode.

Mcdat _

Chthar:

[ure.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1)This device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.

.Increase the separation between the equipment and receiver.

.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

.Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could

void your authority to operate this equipment.

RF Exposure Information

The device was evaluated to meet general RF exposure requirements. This equipment should be installed and used with a minimum distance of 0 mm between the radiator

and your body.