
Bluetooth mode and TWS mode
• The units start in Bluetooth mode. A beeping tone should indicate
the unite are paired by themselves in TWS mode. The unites have a
wireless connection up to 10 meters.
• Search for the Bluetooth name “Hoot360” on your mobile phone to
connect.
• If you just need one unit and not stereo, you just need to turn
on one unit.
Note: The TWS function is only for Bluetooth mode, if you charge to AUX
mode, it cannot work.
AUX-IN
• Turn on the unite. Insert the audio cable into a 3.5mm jack and
connect with another MP3 player. It will skip into the AUX-IN
function. Press + and – to increase and decrease the volume, or
last/next track.
Charging
• Plug the USB cable into speaker MICRO USB port and connect to
power source.
• A Red LED on panel indicates the device is getting charged.
• When charging is complete, the red LED will automatically turn off.
D
▶
Short press:
• Bluetooth mode: Play or Pause • AUX-IN mode: Mute