aspenhome I40HOGRP1 Assembly Instructions

aspenhome
Brand
aspenhome
Model
I40HOGRP1
Type
Assembly Instructions
1. Align the holes in the desk end connector with the holes in the return's.
Using an allen wrench, bolts,lock washers, flat washers and two wood screws,
connect the desk and return together as shown above.
2. Cut the rubber strips and remove the wood strips under the grommets as shown
in detail 3.
  • Page 1 1
  • Page 2 2
  • Page 3 3

aspenhome I40HOGRP1 Assembly Instructions

aspenhome
Brand
aspenhome
Model
I40HOGRP1
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents