2. Love The Drive
  3. BMW 3 convertible wind deflector 318, 320, 325, M3

Love The Drive BMW 3 convertible wind deflector 318, 320, 325, M3 Installation guide

  • Hello! I've read the install guide for the Love The Drive Wind Deflector for BMW E30 models, including the 318, 320, 325, and M3. The document details a step-by-step process using a wire bracket mounting system. I'm ready to answer any questions you have about the product's installation or features.
  • Where can I find video install guides?
    How to start the installation?
    What to do after placing wind deflector into the back seat?
We have our video install guides on
our website and on youtube.com.
Also feel free to call or email us if
you have any questions
1-855-457-5683
information@lovethedrive.com
Start by putting your top down and leaving
your lid up. Pull out the wire brackets from
the closed position on both ends of the
wind deflector.
Place the wind deflector into the
back seat of your convertible.
Place the rear bracket behind the dip in the
trim panel. Then repeat on the other side.
Close the top cover lid to hold the
black hooks in place.
Pull the wire bracket back and forward, then
lower it to line up with the space beside the
seat belt.
The wire hook, when pulled out, will rest
on the trim panel just above the seat belt
near the front seats.
If you have any questions or comments please
call 1-855-457-5683 or email [email protected]
www.lovethedrive.com
Repeat on the other side and you are
ready to Love The Drive.
/