YOTRIO Sonoma Claremont Glider Assembly Instructions

YOTRIO
Brand
YOTRIO
Model
Sonoma Claremont Glider
Type
Assembly Instructions

This manual is also suitable for

PART LIST QUANTITY
A1 PC
B1 PC
C1 PC
D1 PC
E1 PC
F2 PCS
G6 PCS + 1 PC
H2 PCS + 1 PC
I8 PCS + 1 PC
J8 PCS + 1 PC
GLIDER
SHORT BOLT (M6*18)
PLASTIC WASHER
FLAT WASHER + LONG BOLT
(M6*40)
SAVE THESE INSTRUCTIONS
SONOMA CLAREMONT GLIDER ASSEMBLY INSTRUCTIONS
ASSEMBLE ON A FLAT, PROTECTED SURFACE.
FIGURE
SEAT
BACK
LEFT ARM
DESCRIPTION
RIGHT ARM
FLAT WASHER + MEDIUM BOLT
(M6*20)
BASE
Page 1/5
PART LIST QUANTITY
K8 PCS + 1 PC
L1 PC
M1 PC
N2 PCS
SEAT CUSHION
BACK CUSHION
DESCRIPTION
SONOMA CLAREMONT GLIDER ASSEMBLY INSTRUCTIONS
FIGURE
FOR MISSING OR INCORRECT PARTS/HARDWARE, CONTACT THE MANUFACTURER'S CUSTOMER SERVICE DIRECTLY AT
1-866-905-4107 OR WWW.YOTRIOINT.COM
REFER TO LAST PAGE FOR ADDITIONAL CUSTOMER SERVICE DETAILS.
ASSEMBLY INSTRUCTIONS (CONTINUED)
FLAT WASHER
ALLEN WRENCH
Page 2/5
STEP 1
A. PLACE RIGHT ARM (A) UPSIDE DOWN ON A FLAT,
PROTECTED SURFACE.
B. ATTACH SEAT (D) TO RIGHT ARM (A) WITH FLAT
WASHERS AND MEDIUM BOLTS (G) USING ALLEN
WRENCH (L). DO NOT TIGHTEN COMPLETELY.
C. ATTACH SEAT (D) TO LEFT ARM (B) WITH FLAT
WASHERS AND MEDIUM BOLTS (G) USING ALLEN
WRENCH (L). DO NOT TIGHTEN COMPLETELY.
SONOMA CLAREMONT GLIDER ASSEMBLY INSTRUCTIONS
STEP 2
A. TURN SEAT ASSEMBLY TO THE UPRIGHT
POSITION.
B. CONNECT MIDDLE OF BACK (C) TO TOP OF RIGHT
ARM (A) AND LEFT ARM (B) WITH FLAT WASHERS
AND LONG BOLTS (H) USING ALLEN WRENCH (L).
DO NOT TIGHTEN COMPLETELY.
C. CONNECT BOTTOM OF BACK (C) TO RIGHT ARM
(A) AND LEFT ARM (B) WITH FLAT WASHERS AND
MEDIUM BOLTS (G) USING ALLEN WRENCH (L). DO
NOT TIGHTEN COMPLETELY.
ASSEMBLY INSTRUCTIONS (CONTINUED)
Page 3/5
SONOMA CLAREMONT GLIDER ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS (CONTINUED)
STEP 3
A. CAREFULLY ROTATE THE ASSEMBLED UNIT
ONTO ITS FRONT.
B. ATTACH LONG ARM OF GLIDER (F) TO BOTTOM
OF RIGHT ARM (A) WITH PLASTIC WASHERS (J),
FLAT WASHERS (K), AND SHORT BOLTS (I) USING
ALLEN WRENCH (L). DO NOT TIGHTEN
COMPLETELY.
C. ATTACH LONG ARM OF GLIDER (F) TO BOTTOM
OF LEFT ARM (B) WITH PLASTIC WASHERS (J), FLAT
WASHERS (K), AND SHORT BOLTS (I) USING ALLEN
WRENCH (L). DO NOT TIGHTEN COMPLETELY.
STEP 4
A. ATTACH BASE (E) TO SHORT ARMS OF GLIDERS
(F) WITH PLASTIC WASHERS (J), FLAT WASHERS (K),
AND SHORT BOLTS (I) USING ALLEN WRENCH (L).
B. TIGHTEN ALL BOLTS COMPLETELY.
Page 4/5
SERVICE HOURS: 11:30 A. M. to 8:00 P. M. EASTERN STANDARD TIME /8:30 A. M. to 5:00 P. M. PACIFIC STANDARD
TIME
TO ASSIST YOU BETTER, PLEASE GATHER THE FOLLOWING INFORMATION BEFORE CALLING CUSTOMER SERVICE:
PRODUCT NAME AND STYLE NUMBER, DESCRIPTION AND OR IMAGES OF THE ISSUE, ORIGINAL STORE PURCHASE
RECEIPT.
STEP 5
A. TURN GLIDER TO ITS UPRIGHT POSITION SO THAT
IT STANDS STABLE ON THE FLOOR.
B. PLACE SEAT CUSHION (M) ON SEAT (D) AND
ATTACH TIES TO BACK CROSSBAR THEN PLACE BACK
CUSHIONS (N).
C. ASSEMBLY IS COMPLETE.
CUSHION: SPOT CLEAN WITH A SOFT, DAMP CLOTH.
CUSTOMER SERVICE HOT LINE: 1-866-905-4107
SONOMA CLAREMONT GLIDER ASSEMBLY INSTRUCTIONS
** WE RECOMMEND THAT YOU SAVE THE ALLEN WRENCH AND PERIODICALLY TIGHTEN ALL BOLTS.
ASSEMBLY INSTRUCTIONS (CONTINUED)
WEBSITE: WWW.YOTRIOINT.COM
WARRANTY
CUSTOMER SERVICE: PLEASE NOTE - DO NOT RETURN THIS ITEM TO THE RETAILER.
WEIGHT LIMIT
CHAIR: 500 LBS
CARE AND CLEANING
FRAME: WIPE CLEAN WITH A MILD SOAP AND WATER SOLUTION, RINSE WITH CLEAN WATER, AND DRY THOROUGHLY.
DO NOT STAND OR CLIMB ON GLIDER.
1 YEAR LIMITED WARRANTY FOR FRAME AND CUSHIONS.
IN ORDER TO PROLONG THE LIFE OF YOUR GLIDER, PLEASE STORE IN DRY SHELTERED PLACE WHEN NOT IN USE OR
DURING INCLEMENT WEATHER.
Page 5/5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

YOTRIO Sonoma Claremont Glider Assembly Instructions

YOTRIO
Brand
YOTRIO
Model
Sonoma Claremont Glider
Type
Assembly Instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents