Page is loading ...
SAVE THESE INSTRUCTIONS
CLAREMONT
LOVESEAT& MESH COFFEE TABLE
PART LIST FIGURE QUANTITY DESCRIPTION
A 1 PC RIGHT ARM
B 1 PC LEFT ARM
C 1 PC BACK
D 1 PC SEAT
E 6 + 1 PCS SHORT BOLT (M6*18)
F 2 + 1 PCS LONG BOLT (M6*40)
G 8 + 1 PCS FLAT WASHER
H 1 PC ALLEN WRENCH
I 2 PCS BACK CUSHION
J 1 PC SEAT CUSHION
Page
1/4
CLAREMONT LOVESEAT
ASSEMBLY INSTRUCTIONS (CONTINUED)
STEP 1
A. PLACE RIGHT ARM (A) UPSIDE DOWN ON A FLAT, PROTECTED
SURFACE.
B. ATTACH SEAT (D) TO RIGHT ARM (A) WITH FLAT WASHER (G)
AND SHORT BOLT (E) USING ALLEN WRENCH (H). DO NOT
TIGHTEN COMPLETELY.
C. ATTACH LEFT ARM (B) TO SEAT (D) WITH FLAT WASHER (G)
AND SHORT BOLT (E) USING ALLEN WRENCH (H). DO NOT
TIGHTEN COMPLETELY.
STEP 2
A. TURN SEAT ASSEMBLY TO UPRIGHT POSITION.
B. CONNECT BACK (C) TO RIGHT ARM (A) AND LEFT ARM (B)
WITH FLAT WASHER (G) AND LONG BOLT (F) AND SHORT
BOLT (E) USING ALLEN WRENCH (H) AS SHOW. DO NOT
TIGHTEN COMPLETELY.
STEP 3
A. TIGHTEN ALL BOLTS SECURELY USING ALLEN WRENCH (H).
B. RETAIN ALLEN WRENCH (H) FOR USE TO TIGHTEN BOLTS
PERIODICALLY AS NEEDED.
STEP 4
A. PUT CUSHION (J) ON THE SEAT, THEN PUT ON THE BACK
CUSHIONS (I).
Page
2/4
CLAREMONT MESH COFFEE TABLE
ASSEMBLE ON A FLAT, PROTECTED SURFACE.
PART LIST FIGURE QUANTITY DESCRIPTION
A 1 PC TABLE TOP
B 4 PCS LEG
C 1 PC LEG CONNECTOR
D 12 + 1 PCS
BOLT
（
M6*28
）
E 12 + 1 PCS FLAT WASHER
F 1 PC ALLEN WRENCH
Page
3/4
CLAREMONT MESH COFFEE TABLE
ASSEMBLE ON A FLAT, PROTECTED SURFACE.
WEIGHT LIMIT
CHAIR: 500 LBS, COFFEE TABLE: 165 LBS
CARE AND CLEANING
IN ORDER TO PROLONG THE LIFE OF YOUR LOVESEAT AND TABLE, PLEASE STORE IN DRY SHELTERED PLACE WHEN NOT IN USE OR DURING
INCLEMENT WEATHER.
WARRANTY
1 YEAR LIMITED WARRANTY FOR FRAME AND CUSHIONS.
CUSTOMER SERVICE: PLEASE NOTE - DO NOT RETURN THIS ITEM TO THE RETAILER.
CUSTOMER SERVICE HOT LINE: 1-866-905-4107
SERVICE HOURS: 11:30 A. M. to 8:00 P. M. EASTERN STANDARD TIME /8:30 A. M. to 5:00 P. M. PACIFIC STANDARD TIME
WEBSITE: WWW.YOTRIOINT.COM
TO ASSIST YOU BETTER, PLEASE GATHER THE FOLLOWING INFORMATION BEFORE CALLING CUSTOMER SERVICE: PRODUCT NAME AND STYLE
NUMBER, DESCRIPTION AND OR IMAGES OF THE ISSUE, ORIGINAL STORE PURCHASE RECEIPT.
STEP 1
A. PLACE TABLE TOP (A) UPSIDE DOWN ON A FLAT,
PROTECTED SURFACE.
B. ATTACH LEGS (B) TO TABLE TOP (A) WITH FLAT
WASHER (E) AND BOLT (D) USING ALLEN WRENCH (F).
DO NOT TIGHTEN COMPLETELY.
STEP 2
A. ATTACH LEG CONNECTOR (C) TO LEG (B) WITH FLAT
WASHER (E) AND BOLT (D) USING ALLEN WRENCH (F).
DO NOT TIGHTEN COMPLETELY.
STEP 3
A. ROTATE TABLE TO UPRIGHT POSITION SO THAT IT
STANDS STABLE ON THE FLOOR.
B. TIGHTEN ALL BOLTS SECURELY USING ALLEN WRENCH
(F).
TIGHTEN LEG CONNECTOR (C) FIRST, THAN TIGHTEN LEG
(B) TO TABLE TOP (A).
C. KEEP ALLEN WRENCH (F) TO TIGHTEN ALL BOLTS
PERIODICALLY AS NEEDED.
Page
4/4
/
