Cisco MGX 8830 ATM Multiservice Switch Configuration Guide

Corporate Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

http://www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 526-4100

Cisco ATM Services (AXSM) Configuration

Guide and Command Reference for MGX

Switches

Release 5

August 18, 2004

Customer Order Number:

Text Part Number: OL-4548-01

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL

STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT

WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT

SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE

OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH

ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT

LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF

DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,

WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO

OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

CCSP, the Cisco Square Bridge logo, Cisco Unity, Follow Me Browsing, FormShare, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work,

Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, Cisco,

the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Empowering the Internet Generation,

Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net

Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing,

ProConnect, RateMUX, Registrar, ScriptShare, SlideCast, SMARTnet, StrataView Plus, SwitchProbe, TeleRouter, The Fastest Way to Increase Your Internet Quotient,

TransPath, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship

between Cisco and any other company. (0406R)

Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches

3

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

CONTENTS

Preface 19

About This Manual 19

Objectives 19

Audience 19

Organization 20

Documentation 20

Documentation Notes for the April 2004 Product Releases 20

Related Documentation 21

Obtaining Documentation 33

Documentation Feedback 34

Obtaining Technical Assistance 34

Cisco TAC Website 35

Opening a TAC Case 35

TAC Case Priority Definitions 35

Obtaining Additional Publications and Information 36

CHAPTER

1Introduction 1

Command Line Interface 1

CLI Prompt 2

CLI Syntax 2

AXSM Models 4

Logical Ports 6

Common Acronyms 7

List of Commands by Function 8

CHAPTER

2Preparing AXSM Lines for Communication 1

Preparing for Provisioning 1

Configuration Quickstart 3

Bringing Up Lines 3

Configuring Lines 6

Configuring SONET Lines 7

Configuring T3 Lines 9

Configuring E3 Lines 10

Configuring T1 Lines 10

Contents

4

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

Configuring E1 Lines 11

Verifying Line Configuration 12

Establishing Redundancy Between Two Lines with APS 12

Adding Intracard APS Lines 13

Adding Intercard APS Lines 14

Channelizing SONET/SDH Lines into Paths 15

Channelizing a Line 16

Bringing Up a Path 19

Configuring DS3 Paths 20

CHAPTER

3Provisioning ATM Services 1

Quickstart Provisioning Procedures 3

MPLS and PNNI Trunk Configuration Quickstart 3

MPLS and PNNI UNI Port Configuration Quickstart 5

SVC Configuration Quickstart 8

SPVC and SPVP Configuration Quickstart 9

PNNI Virtual Trunk Configuration Quickstart 11

XPVC and XPVP Configuration Quickstart 15

Cisco IGX Feeder to Cisco MGX 8850 Configuration Quickstart 17

PNNI Feeder Configuration Quickstart 19

Cisco BPX PNNI Trunk Configuration Quickstart 21

AINI Link Configuration Quickstart 23

IISP Link Configuration Quickstart 25

XLMI Link Configuration Quickstart 27

General AXSM Configuration Procedures 30

Adding ATM Ports 31

Configuring Inverse Multiplexing over ATM 33

Partitioning Port Resources Between Controllers 39

Selecting the Port Signaling Protocol 42

Assigning Static ATM Addresses to Destination Ports 45

Configuring ILMI on a Port 46

Configuring AXSM Line Clock Sources 52

Configuring PNNI Links 53

Configuring SPVCs and SPVPs 53

Defining a Feeder Port 57

Defining Destination Addresses for Static Links 60

Configuring Point-to-Multipoint SPVCs and SPVPs 61

Contents

5

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

CHAPTER

4AXSM Card Management 1

Managing CLI Sessions 2

Managing Cards 2

Displaying General Card Information 3

Displaying Software Version and Status Information 3

Managing Card SCTs 4

Displaying the SCT Assigned to a Card 4

Selecting or Changing a Card SCT 5

Displaying Card SCT Settings 6

Managing Port SCTs 12

Displaying the SCT Assigned to a Port 12

Selecting a Port SCT 13

Changing a Port SCT 13

Displaying Port SCT Settings 14

Managing Lines 38

Displaying a List of Lines 38

Displaying the Configuration for a Single Line 38

Bringing Down a Line 39

Managing Ports 40

Displaying a List of Ports 40

Displaying the Status of a Single Port 41

Modifying an ATM Port Configuration 41

Deleting Ports 45

Managing Resource Partitions 47

Displaying an ATM Port Resource Partition Configuration 48

Changing the Configuration of an ATM Port Resource Partition 49

Deleting an ATM Port Resource Partition 51

Managing Connections 53

Displaying a List of ATM Connections 53

Displaying the Status of a Single ATM Connection 54

Deleting ATM Connections 55

Removing a Cisco IGX Feeder Connection 55

Configuring SPVC/SPVP Overrides on Single-Ended Connections 56

Rerouting a P2MP Party 58

Deleting a P2MP Party Configuration 59

Testing ATM Connections 60

Verifying PNNI Communications 62

Verifying PNNI Trunk Communication 62

Contents

6

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

Verifying End-to-End PNNI Communications 64

Managing IMA Groups 65

Displaying a List of IMA Groups 66

Displaying the Configuration for a Single IMA Group 66

Configuring IMA Groups 67

Configuring an IMA Link 70

Deleting Lines from an IMA Group 70

Deleting an IMA Group 71

Administratively Enabling and Disabling IMA 72

Testing an IMA Link 72

Managing Loopbacks 73

CHAPTER

5AXSM Command Reference 1

addapsln 2

addchanloop 6

addcon 8

addfdr 23

addimagrp 24

addimalnk 26

addimaport 27

addlmi 30

addlnloop 32

addpart 35

addport 39

addrscprtn 44

bootchange 47

bye 48

cc 49

ccc 50

clidbxlevel 51

clradjlnalmcnt 53

clralmcnt 55

clrbecnt 56

clrbucketcstat 57

clrcdcnt 58

clrchancnt 59

Contents

7

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

clrchancnts 60

clrchandbg 61

clrchandbgcnt 62

clrcosbdbgcnt 63

clrfdrstat 66

clrilmicnt 67

clrimadelay 68

clrimagrpalmcnt 69

clrimagrpalmcnts 70

clrimagrpcnt 71

clrimalnkcnt 72

clrimalnkcnts 73

clrlmistat 74

clrlmitrace 76

clrlncnt 77

clrlntrace 78

clrpathalmcnt 79

clrportcnt 80

clrportcnts 82

clrportdbgcnt 84

clrsarcnt 88

clrscrn 90

cmdhistory 91

cnfabr 92

cnfalm 94

cnfapsln 98

cnfatlaslndiagstat 100

cnfatmimagrp 101

cnfatmlayer 102

cnfatmln 103

cnfautolndiag 105

cnfbert 106

cnfcdmode 109

cnfcdsct 110

cnfcdstat 113

Contents

8

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

cnfcellfilter 116

cnfchandbg 117

cnfcli 119

cnfcon 121

cnfcosbdbg 128

cnfilmi 129

cnfimagrp 130

cnfimalnk 132

cnfimalnktst 133

cnflmitrace 134

CHAPTER

5cnfln 135

cnflnalm 139

cnfpart 142

cnfpath 145

cnfpathalm 147

cnfport 149

cnfportdbg 151

cnfportdbgcnt 152

cnfprfparam 154

cnfrmrsrc 155

cnfrscprtn 156

copychans 158

copycons 160

core 162

delallcon 166

delapsln 167

delchanloop 168

delcon 169

delcons 170

delfdr 172

delimagrp 173

delimalnk 174

dellmi 175

dellnloop 176

delpart 178

Contents

9

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

delport 179

delrscprtn 180

dnallports 181

dncon 182

dncons 183

dnilmi 184

dnimagrp 185

dnlmi 186

dnln 187

dnpath 189

dnport 190

dspadjlnalm 191

dspadjlnalmcnt 192

dspalm 194

dspalmcnf 196

dspalms 199

dspapsbkplane 202

dspapsln 203

dspapslns 205

dspatlasdiagcnfcstat 206

dspatlasdiagcstat 208

dspatlasdiagstatcnf 209

dspatlaslndiagstat 210

dspatmimagrp 212

dspatmlayer 213

dspatmlayercnt 214

dspatmln 215

dspautolndiag 216

dspbecnt 217

dspbert 218

dspbertstats 219

dspbucketcstat 220

dspcd 221

dspcdbucketcnt 225

dspcdcnt 226

Contents

10

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

dspcdsct 229

dspcdstatcnf 236

dspchancnt 237

dspchandbgcnf 241

dspchandbgcnt 242

dspchanloop 243

dspchantests 244

dspcon 246

dspconalarms 249

dspconalmcnts 250

dspconalms 251

dspconhwcnf 252

dspconload 257

dspcons 259

dspcosbdbgcnf 263

dspcosbdbgcnt 264

dspcosbucketcnt 266

dspCproCnfg 267

dspcprotbls 268

dspDevErr 269

dspDevErrHist 271

dspegrbucketcnt 273

dspfdr 274

dspfdrs 275

dspfdrstat 276

dspfile 277

dspframerdiagstat 278

dsphotstandby 279

dspilmi 280

dspilmicnt 281

dspilmis 282

CHAPTER

5dspimagrp 283

CHAPTER

3dspimagrps 286

dspimagrpalm 288

Contents

11

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

dspimagrpalms 290

dspimagrpalmcnt 292

dspimagrpbucketcnt 293

dspimagrpcnt 294

dspimalnk 295

dspimalnks 297

dspimalnkalm 299

dspimalnkalms 300

dspimalnkbucketcnt 301

dspimalnkcnt 302

dspingbucketcnt 304

dsplmi 305

dsplmis 306

dsplmistat 307

dsplmitrace 308

dspln 309

dspln 312

dsplnalm 314

dsplnalmcnf 315

dsplnalmcnt 316

dsplnalms 318

dsplnbucketcnt 319

dsplncnt 321

dsplnload 323

dsplnpmbucketcnt 324

dsplns 326

dsplns 328

dspload 330

dspmcastload 332

dspmempart 333

dspmsgq 336

dspmsgqs 338

dsppart 339

dspparts 341

dsppath 342

Contents

12

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

dsppaths 344

dsppathalm 346

dsppathalmcnf 347

dsppathalmcnt 348

dsppathalms 350

dspport 351

dspports 353

dspportbucketcnt 355

dspportcnt 356

dspportdbgcnf 358

dspportdbgcnt 359

dspportload 361

dspportsct 362

dspprf 369

dspprfhist 375

dspqecnfcnt 379

dsprmalms 381

dsprminfo 382

dsprmrsrc 383

dsprmrsrcs 385

dsprscprtn 386

dsprscprtns 388

dspsarcnt 389

dspsct 391

dspsegment 394

dspsegments 395

dspsem 396

dspsems 398

dspspvcif 401

dspspvcifs 402

dsptask 403

dsptasks 405

dsptotals 408

dspudpdiagcstat 409

dspudpdiagstat 410

Contents

13

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

dspversion 412

dspvsicon 414

dspvsicons 416

dspvsipart 417

dspvsiparts 418

dumptrace 419

exit 420

help (?) 421

history 422

insbiterror 423

logout 424

memShow 425

offdiagcstat 426

offdiagstat 427

ondiagcstat 428

ondiagstat 429

ping 430

reboot 431

restartimagrp (rstrtimagrp) 432

rrtcon 433

sesntimeout 434

sesnwatchdog 435

seteng 436

setsctver 437

sfmDBShow 438

shellConn 440

showsyserr 441

smclrscrn 442

startbert 443

startimalnktst 444

stopbert 445

stopimalnktst 446

switchapsln 447

syserr 448

timeout 449

Contents

14

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

trace 450

tstconseg 451

tstdelay 453

upallports 456

upcon 458

upcons 459

upilmi 460

upimagrp 462

uplmi 463

upln 464

uppath 465

upport 466

users 467

who 468

whoami 469

I

NDEX

FIGURES

15

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

Figure 2-1 Bay and Line Numbers 6

Figure 3-1 Virtual Trunk Configuration 11

Figure 3-2 IGX Feeder Topology 17

Figure 3-3 Relationship Between Cards, Bays, Lines, and Logical Interface Numbers 31

Figure 3-4 Relationship of Port Controller, Controller Partition, and Resource Partitions 40

Figure 3-5 Feeder Node Topology 57

Figure 5-1 Connection (Channel) Loopbacks on the Ingress and Egress 6

Figures

16

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

TABLES

17

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

Table 1-1 CLI Prompt Descriptions 2

Table 1-3 AXSM Command List by Function 8

Table 2-1 AXSM Card Types 4

Table 2-2 Parameters for cnfln Command 8

Table 2-3 dspln Command Parameters 12

Table 2-4 APS Line Architecture Modes 13

Table 2-5 Configuring OC-48 Path Widths with the cnfpath Command 16

Table 2-6 cnfpath Command Parameters 18

Table 3-1 AXSM Link and Connection Types 1

Table 3-2 addimagrp Command Parameters 34

Table 3-3 cnfimalnk Command Parameters 35

Table 3-4 addmaport Command Parameters 37

Table 3-5 Service Module Compatibility Between Feeders 58

Table 3-6 Connection/Party Limits for Cisco MGX 8850 (PXM45), Cisco MGX 8950, and MGX 8880 Switches 62

Table 3-7 addparty Command Parameters 63

Table 4-1 Session Management Commands 2

Table 4-2 Options for dspcdsct Command 6

Table 4-3 Options for dspportsct Command 14

Table 4-4 SCT General Parameter Descriptions 17

Table 4-5 SCT COSB Parameter Descriptions 21

Table 4-6 SCT VC Threshold Parameter Descriptions 25

Table 4-7 Class of Service (CoS) Scaling Table 27

Table 4-8 Logical Interface Scaling Table 28

Table 4-9 SCT COSB Threshold Parameter Descriptions 31

Table 4-10 SCT General Parameter Descriptions 34

Table 4-11 SCT COSB Threshold Parameter Descriptions 35

Table 4-12 SCT COSB Threshold Parameter Descriptions 37

Table 4-13 Parameters for the cnfport Command 42

Table 4-14 Keywords and Arguments for the cnfpart Command 49

Table 4-15 addparty Command Parameters 58

Table 4-16 Parameters for cnfimagrp Command 68

Tables

18

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

Table 4-17 Parameters for addlns2imagrp Commands 70

Table 5-1 APS Support on AXSM Cards 3

Table 5-2 Default Traffic Parameters for AXSM 9

Table 5-3 Ranges for PCR, SCR, and MCR for Each Line Type 10

Table 5-13 Applicable Service Types for CDV and CTD 10

Table 5-14 clidbxlevel 1 help Output Display Descriptions 51

Table 5-15 BERT Test Patterns 106

Table 5-16 Statistics Port to Backplane Ingress per Connection 113

Table 5-17 Statistics Backplane to Port Egress per Connection 114

Table 5-1 Output Display Field Descriptions for the dspconhwcnf Command 252

19

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

Preface

About This Manual

Welcome to the command line interface (CLI) documentation for the Cisco MGX™ 8850 wide area

routing switch, Release 4

This preface discusses:

• Objectives

• Audience

• Organization

• Documentation Notes for the April 2004 Product Releases

• Ordering Documentation

• Documentation Feedback

• Cisco.com

• Technical Assistance Center

• Documentation

• Obtaining Documentation

• Obtaining Technical Assistance

• Obtaining Additional Publications and Information

Objectives

This publication provides instructions for using the CLI commands for the Cisco MGX 8850,

MGX 8950, MGX 8830, and MGX 8880.

Audience

The Command Line Interface (CLI) lets you control the network from a level somewhat below that

provided by Cisco WAN Manager. This document helps network designers and operators to set up,

manage, and troubleshoot networks.

20

Cisco ATM Services (AXSM) Software Configuration Guide and Command Reference for MGX Switches, Release 5

Part Number OL-4548-01 Rev. B0, August 18, 2004

Documentation

Organization

The major sections of this document are as follows:

• Chapter 1, “Introduction,” introduces the AXSM cards.

• Chapter 2, “Preparing AXSM Lines for Communication,” describes how to prepare AXSM lines for

provisioning.

• Chapter 3, “Provisioning ATM Services,” describes how to provision ATM connections between the

AXSM cards described in this guide and between these AXSM cards and other types of cards.

• Chapter 4, “AXSM Card Management,” describes card management tasks you might want to do after

provisioning is complete.

• Chapter 5, “AXSM Command Reference,” describes the command-line interface (CLI) commands

that you can use to configure, provision, and manage the AXSM cards.

Documentation

A Guide to Cisco Multiservice Switch and Media Gateway Documentation ships with your product. That

guide contains general information about how to locate Cisco MGX, BPX, SES, and CWM

documentation online.

Documentation Notes for the April 2004 Product Releases

The April 2004 release includes new hardware or features for the following releases:

• Cisco MGX Release 5 for the MGX 8880 Media Gateway

• Cisco MGX Release 5 for these multiservice switches:

–

Cisco MGX 8850 (PXM1E)

–

Cisco MGX 8850 (PXM45)

–

Cisco MGX 8950

–

Cisco MGX 8830

• Cisco MGX Release 1.3, for these multiservice switches:

–

Cisco MGX 8850 (PXM1)

–

Cisco MGX 8230

–

Cisco MGX 8250

• Cisco VXSM Release 5. The Voice Switch Service Module (VXSM) card is new for this release.

• Cisco WAN Manager Release 15. The Cisco WAN Manager (CWM) network management software

is improved for this release. The previous release of CWM was 12. CWM Release 15 introduces a

helpful new documentation feature: web-based online Help. To invoke online Help, press F1 on a

PC, press the Help key on a UNIX workstation, or select Help from the main or popup menu.

Other components of multiservice WAN products, such as the Service Expansion Shelf (SES) and WAN

switching software have no new features for the April 2004 release, therefore, their existing

documentation was not updated.

Page is loading ...

Cisco MGX 8830 ATM Multiservice Switch Configuration Guide

Related papers

Other documents