2. JasonL
  3. BQDW2412.B.SO

JasonL BQDW2412.B.SO Operating instructions

  • Hello! I have reviewed the assembly instructions for the Quadro Wood A Boardroom table. This document contains a detailed guide on how to assemble the table, including a parts list and step-by-step instructions for its legs, frame, beams and table tops. It also notes that two people are needed for installation and that a power screwdriver and Allen key are required. I'm ready to answer any questions you have about assembling this product.
  • What tools are required for installation?
    How many people are required for installation?
    What is the size of the table?
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 2400 mm
Page 1 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
B
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 2400 mm
Table top x2
Leg Quadro A x2
Connector frame x1
Beam x4
Plastic bracket x16
A
B
C
D
E
Allen key x2J
M8x20MM CSK x8
M8x20MM Socket head x8
M6x20MM Socket head x16
M6x30MM Socket head x16
F
G
H
I
COMPONENTS
SCREWS
Page 2 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
D
E
F G H I
A
C
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 2400 mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 3 of 7
Insert the bottom of the legs as shown in the
illustration. Using Allen Key provided, attach
Socket head screw socket for all legs.
You will notice two colored
stickers located on each leg.
Both legs must have the colour
sticker facing away from where
the plastic brackets are inserted.
Plastic bracket holes
facing to the other side.
STEP 01 STEP 02
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 2400 mm
Using Allen Key provided, attach 4 plastic brackets per leg (E)
(as per picture above) using M6x20MM (H) Socket head screw.
Do the same with Connector frame (C).
Using Allen Key provided, attach M8x20MM Socket head (G)-
screw socket half way into leg for both legs (B) and into
Connector frame (C).Page 4 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
G
H
STEP 03 STEP 04
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 2400 mm
STEP 05
Adjust extendable beam (D) to desired
length using markers and secure beam
at that length using screws provided
Page 5 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 2400 mm
Attach beam (D) to legs (B) and Connector frame (C)
using nut insert in legs. See point attached
Frame looks like this. Using Allen Key, attach beam (D) with Socket (F)
STEP 07
Page 6 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
F
F
F
F
F
F
F
F
STEP 06
TOP VIEW
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 2400 mm
STEP 08
Page 7 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Place desktops ontop of frame. Nut inserts in
top will align with plastic joiner brackets using
M6x30MM (I) sockets attached tops to frame.
I
TABLE TOP
BOTTOM VIEW
/