2. JasonL
  3. BQDL3612.B.SO

JasonL BQDL3612.B.SO Operating instructions

  • Hello! I've reviewed the assembly instructions for the jason.l Quadro Loop 3600 mm boardroom table. This document includes details about the required tools, components, and a step-by-step guide for assembling the table. It emphasizes the need for two people during installation and explains how to attach plastic brackets, connect the legs, and secure the extendable beams. I'm ready to answer any questions you have.
  • What tools are needed for the assembly?
    How many people are required for installation?
    What is the length of the table?
ASSEMBLY INSTRUCTIONS
Quadro Loop
Boardroom table
Sizes: 3600 mm
Page 1 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
ASSEMBLY INSTRUCTIONS
Quadro Loop
Boardroom table
Sizes: 3600 mm
Table top x3
Leg Quadro x2
Leg Quadro Loop x2
Connector frame x2
Beam x8
Plastic bracket x24
A
B
C
D
E
F
Allen key x2K
M8x20MM CSK x12
M8x20MM Socket head x12
M6x20MM Socket head x24
M6x30MM Socket head x24
G
H
I
J
COMPONENTS
SCREWS
Page 2 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
E
F
G H I J
BD
A
C
ASSEMBLY INSTRUCTIONS
Quadro Loop
Boardroom table
Sizes: 3600 mm
Using Allen Key provided, attach 4 plastic brackets per leg (F)
(as per picture above) using M6x20MM (I) Socket head screw.
Do the same with Connector frame (D). Connect Loop Legs (C)
to Bottom of Quadro Legs (B) by using 4 bolts per leg.
Using Allen Key provided, attach M8x20MM Socket head (H)-
screw socket half way into leg for both legs (B) and into
Connector frame (D).Page 3 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
H
STEP 02
I
STEP 01
ASSEMBLY INSTRUCTIONS
Quadro Loop
Boardroom table
Sizes: 3600 mm
STEP 03
Adjust extendable beam (E) to desired
length using markers and secure beam
at that length using screws provided
Page 4 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50
ASSEMBLY INSTRUCTIONS
Quadro Loop
Boardroom table
Sizes: 3600 mm
Attach beam (E) to legs (B) and Connector frame (D)
using nut insert in legs. See point attached
Frame looks like this. Using Allen Key, attach beam (E) with Socket (G)
STEP 05
Page 5 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
G
G
G
G
G
G
G
G
G
G
G
G
STEP 04
TOP VIEW
ASSEMBLY INSTRUCTIONS
Quadro Loop
Boardroom table
Sizes: 3600 mm
STEP 06
Page 6 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Place desktops ontop of frame. Nut inserts in
top will align with plastic joiner brackets using
M6x30MM (J) sockets attached tops to frame.
J
TABLE TOP
BOTTOM VIEW
/