2. JasonL
  3. BQDL2412.B.SO

JasonL BQDL2412.B.SO Operating instructions

  • Hello! I've reviewed the assembly instructions for the Quadro Loop 2400 mm Boardroom table. This document outlines the steps for assembling your new table, including the required tools and parts. I am ready to help you with any questions you might have about assembling this table.
  • What tools are required for assembly?
    How many people are needed for installation?
ASSEMBLY INSTRUCTIONS
Quadro Loop
Boardroom table
Size: 2400 mm
Page 1 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
ASSEMBLY INSTRUCTIONS
Quadro Loop
Boardroom table
Size: 2400 mm
Table top x2
Leg Quadro x2
Leg Quadro Loop x2
Connector frame x1
Beam x4
Plastic bracket x16
A
B
C
D
E
F
Allen key x2K
M8x20MM CSK x8
M8x20MM Socket head x8
M6x20MM Socket head x16
M6x30MM Socket head x16
G
H
I
J
COMPONENTS
SCREWS
Page 2 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
E
F
G H I J
BD
A
C
ASSEMBLY INSTRUCTIONS
Quadro Loop
Boardroom table
Size: 2400 mm
Using Allen Key provided, attach 4 plastic brackets per leg (F)
(as per picture above) using M6x20MM (I) Socket head screw.
Do the same with Connector frame (D). Connect Loop Legs (C)
to Bottom of Quadro Legs (B) by using 4 bolts per leg.
Using Allen Key provided, attach M8x20MM Socket head (H)-
screw socket half way into leg for both legs (B) and into
Connector frame (D).Page 3 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
H
STEP 02
I
STEP 01
ASSEMBLY INSTRUCTIONS
Quadro Loop
Boardroom table
Size: 2400 mm
STEP 03
Adjust extendable beam (E) to desired
length using markers and secure beam
at that length using screws provided
Page 4 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50
ASSEMBLY INSTRUCTIONS
Quadro Loop
Boardroom table
Size: 2400 mm
Attach beam (E) to legs (B) and Connector frame (D)
using nut insert in legs. See point attached
Frame looks like this. Using Allen Key, attach beam (E) with Socket (G)
STEP 05
Page 5 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
G
G
G
G
G
G
G
G
STEP 04
TOP VIEW
ASSEMBLY INSTRUCTIONS
Quadro Loop
Boardroom table
Size: 2400 mm
STEP 06
Page 6 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Place desktops ontop of frame. Nut inserts in
top will align with plastic joiner brackets using
M6x30MM (J) sockets attached tops to frame.
J
TABLE TOP
BOTTOM VIEW
/