Ever surge protector VARIANT User manual

Ever
Brand
Ever
Model
surge protector VARIANT
Type
User manual
EVER Sp. z o.o., ul. Wołczyńska 19, 60-003 Poznań, Poland
www.ever.eu | serwis@ever.eu
TYPE 01
2016-06-16
USER MANUAL FOR SURGE PROTECTOR
VARIANT
For correct operation, the device should be connected to a power outlet with the earthing pin. The device should be used indoors, where the electric installation utilises unambiguously identified wires: phase and
neutral.
The pin grid array of the power socket should look like figure 1 and 2:
Caution! If a power cord, different than the one supplied with the protector, is used, the layout of pins should be as shown in Fig. 3.
PE – safety contact | N –neutral contact | L-phase contact
Fig. 1 The pin grid array of the power socket (PN-E-93201:1997)
Fig.2 Layout of pins in input socket IEC320.
Fig. 3 Layout of pins of the power cord.
Fig. 4 Active surge protector is indicated by highlighted LED
To connect the EVER surge protector:
connect the power cord to the protector’s input socket(IEC 320 C14),
connect the outlet plug of the surge protector to the power outlet,
plug in the outlet plugs of the protected devices to the power outlets on the surge protector,
connect the surge protector’s input plug to the mains socket connect the plugs of the protected devices to the surge protector’s socketsswitch on the mains switch,
the switch buton is illuminated once the mains sockets are powered.
OPERATION GUIDELINES
If there is no power in the protector’s sockets (the switch is not illuminated), make sure there is power in the mains socket to which the device is connected. If there is still no power on the protector’s sockets,
despite the fact that there is power on the protector’s input plug, the device must be repaired. For repair information see www.ever.eu.
The power strip should only be used in systems with safety contact (earthing pins)!
Taking into consideration the type and fuse location, the safety systems applied in the building system are used as one of the security measures.
Depending on the type of ground to which surge protector will be fixed (concrete, brick, plasterboard), use the appropriate set of pins with screws dedicated to this type of ground. Installation should carried out
in accordance with the fixing template available at www.ever.eu
NOTE! The surge protector is fully disconnected from the power network by unplugging the power lead plug from the socket, which should be easily accessible and located close to the device.
Product is designed for indoor use. Protect the device from humidity.
VARIANT
Appropriate utilisation of used up electric and electronic equipment helps to avoid
consequences resulting from the presence of dangerous materials, as well as
inappropriate disposal and processing of such equipment, which may be hazardous to
human life and the environment. (Act dated 29 July 2005 on used up electric and
electronic equipment, article 22.1 items 1 and 2.).
According to the regulations binding in the European Union, a crossed
rubbish bin symbol means that when a product is no longer used it
should be disposed of at a special waste pickup site. This concerns the
device itself, as well as other accessories marked with this symbol. Do
not dispose of those products together with unsorted household
waste.
T/LZ09-VAR020/0410
Surge protector
~ 250 V / 50 Hz
10 A
10 A
2500 W
5; in accordance with NF C 61-314; System Child
Protection
1 x automatic fuse 10 A
SPD type 3
L - N
175 J
6 kV
≤ 1,3 kV
~ 275 V
6 kA
1x LED (surge protector indicator)
NF C 61-314
2-pole lighted
64 x 345 x 50 mm
2 m
290 g (unit) + 202 g (detachable power cord)
  • Page 1 1

Ever surge protector VARIANT User manual

Ever
Brand
Ever
Model
surge protector VARIANT
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents