Tektronix TDS3000 Series Operator Training Kit Manual

Tektronix
Brand
Tektronix
Model
TDS3000 Series
Type
Operator Training Kit Manual

This manual is also suitable for

xx
TDS3000 & TDS3000B
Digital Phosphor Oscilloscopes
Operator Training Kit Manual
*P07110 5101*
071-1051-01
1100111001010
11
0110011
11011
11
010100101101
001
1110110111
0101011
01010
TDS3000 & TDS3000B
Operator Training Kit Manual
071-1051-01
www.tektronix.com
TDS3000 & TDS3000B
Operator Training Kit Manual
071-1051-00
www.tektronix.com
This product training document file is protected by Copyright © Tektronix,
Inc. All rights reserved.
End users of this Tektronix produc t training document file are permitted to
print any portion of this file or copy the electronic file for personal use. Print
or electronic reproduction of this product traini ng document file for resale is
strictly prohibited.
Tektronix, Inc., P.O. Box 500, Beaverton, OR 97077
TEKT RONIX and TEK are registered trademarks of Tektronix, Inc.
This product training document file is protected by Copyright © Tektronix,
Inc. All rights reserved.
End users of this Tektronix produc t training document file are permitted to
print any portion of this file or copy the electronic file for personal use. Print
or electronic reproduction of this product traini ng doc ument file for resale is
strictly prohibited.
Tektronix, Inc., P.O. Box 500, Beaverton, OR 97077
TEKT RONIX and TEK are registered trademarks of Tektronix, Inc.
WARRANTY
Tektronix warrants that the parts, assemblies and supplies (“products”) that it manufactures
and sells will be free from defects in materials and workmanship for a period of three (3)
months from the date of shipment. If a product proves defective during this warranty
period, Tektronix, at its option, either will repair the defective product without charge for
parts and labor, or will provide a replacement in exchange for the defective product.
In order to obtain service under this warranty, Customer must notify Tektronix of the defect
before the expiration of the warranty period and make suitable arrangements for the
performance of service. Customer shall be responsible for packaging and shipping the
defective product to the service center designated by Tektronix, with shipping charges
prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to
a location within the country in which the Tektronix service center is located. Customer
shall be responsible for paying all shipping charges, duties, taxes, and any other charges for
products returned to any other locations.
This warranty shall not apply to any defect, failure or damage caused by improper use or
improper or inadequate maintenance and care. Tektronix shall not be obligated to furnish
service under this warranty a) to repair damage resulting from attempts by personnel other
than Tektronix representatives to install, repair or service the product; b) to repair damage
resulting from improper use or connection to incompatible equipment; c) to repair any
damage or malfunction caused by the use of non-Tektronix supplies; or d) to service a
product that has been modified or integrated with other products when the ef fect of such
modification or integration increases the time or difficulty of servicing the product.
THIS WARRANTY IS GIVEN BY TEKTRONIX IN LIEU OF ANY OTHER
WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS
DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX’ RESPONSIBILITY
TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND
EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF
THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE
FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR
HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
WARRANTY
Tektronix warrants that the parts, assemblies and supplies (“products”) that it manufactures
and sells will be free from defects in materials and workmanship for a period of three (3)
months from the date of shipment. If a product proves defective during this warranty
period, Tektronix, at its option, either will repair the defective product without charge for
parts and labor, or will provide a replacement in exchange for the defective product.
In order to obtain service under this warranty, Customer must notify Tektronix of the defect
before the expiration of the warranty period and make suitable arrangements for the
performance of service. Customer shall be responsible for packaging and shipping the
defective product to the service center designated by Tektronix, with shipping charges
prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to
a location within the country in which the Tektronix service center is located. Customer
shall be responsible for paying all shipping charges, duties, taxes, and any other charges for
products returned to any other locations.
This warranty shall not apply to any defect, failure or damage caused by improper use or
improper or inadequate maintenance and care. Tektronix shall not be obligated to furnish
service under this warranty a) to repair damage resulting from attempts by personnel other
than Tektronix representatives to install, repair or service the product; b) to repair damage
resulting from improper use or connection to incompatible equipment; c) to repair any
damage or malfunction caused by the use of non-Tektronix supplies; or d) to service a
product that has been modified or integrated with other products when the ef fect of such
modification or integration increases the time or difficulty of servicing the product.
THIS WARRANTY IS GIVEN BY TEKTRONIX IN LIEU OF ANY OTHER
WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS
DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX’ RESPONSIBILITY
TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND
EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF
THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE
FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR
HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
TDS3000 & TDS3000B Operator Training Kit Manual
General Safety Summary
Review the following safety precautions to avoid injury and prevent
damage to this product or any products connected to it. To avoid
potential hazards, use this product only as spec ified.
While using this product, you may need to access other parts of the
system. Read the General Safety Summary in other system manuals
for warnings and cautions related to operating the system.
To Avoid Fire or Personal Injury
Connect and Disconnect Properly. Do not connect or disconnect probes
or test leads while they are connected to a voltage source.
Connect the ground lead of the probe to earth ground only.
Replace Batteries Properly. Replace batte ries only with the proper type
and rating specified.
Use Proper AC Adapter. Use only the AC adapt er specified for this
product.
Use Proper Fuse. Use only the fuse type and rating speci fied for this
product.
Avoid Exposed Circuitry. Do not touch exposed connections a nd
components when power is present.
Do Not Operate With Suspected Failures. If you suspect there is damage
to this product, have it inspected by qualified service personnel.
Do Not Operate in Wet/Damp Conditions.
Do Not Operate in an Explosive Atmosphere.
Keep Product Surfaces Clean and Dry.
TDS3000 & TDS3000B Operator Training Kit Manual
General Safety Summary
Review the following safety precautions to avoid injury and prevent
damage to this product or any products connected to it. To avoid
potential hazards, use this product only as spec ified.
While using this product, you may need to access other parts of the
system. Read the General Safety Summary in other system manuals
for warnings and cautions related to operating the system.
To Avoid Fire or Personal Injury
Connect and Disconnect Properly. Do not connect or disconnect probes
or test leads while they are connected to a voltage source.
Connect the ground lead of the probe to earth ground only.
Replace Batteries Properly. Replace batte ries only with the proper type
and rating specified.
Use Proper AC Adapter. Use only the AC adapt er specified for this
product.
Use Proper Fuse. Use only the fuse type and rating speci fied for this
product.
Avoid Exposed Circuitry. Do not touch exposed connections a nd
components when power is present.
Do Not Operate With Suspected Failures. If you suspect there is damage
to this product, have it inspected by qualified service personnel.
Do Not Operate in Wet/Damp Conditions.
Do Not Operate in an Explosive Atmosphere.
Keep Product Surfaces Clean and Dry.
General Safety Summary
TDS3000 & TDS3000B Operator Training Kit Manual
Safety Terms and Symbols
Terms in This Manual. These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that
could result in injury or loss of life.
CAUTION. Caution statements identify conditi ons or practices that
could result in damage to this product or other property.
Terms on the Product. These terms may appear on the product:
DANGER indicates an injury hazard immediately accessible as you
read the marking.
WARNING indicates an injury hazard not immediately accessible as
you read the marking.
CAUTION indicates a hazard to property including the product.
Symbols on the Product. These symbols may appear on the product:
CAUTION
Refer to Manual
Standby
General Safety Summary
TDS3000 & TDS3000B Operator Training Kit Manual
Safety Terms and Symbols
Terms in This Manual. These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that
could result in injury or loss of life.
CAUTION. Caution statements identify conditi ons or practices that
could result in damage to this product or other property.
Terms on the Product. These terms may appear on the product :
DANGER indicates an injury hazard immediately accessible as you
read the marking.
WARNING indicates an injury hazard not immediately accessible as
you read the marking.
CAUTION indicates a hazard to property including the product.
Symbols on the Product. These symbols may appear on the product:
CAUTION
Refer to Manual
Standby
TDS3000 & TDS3000B Operator Training Kit Manual
Contacting Tektronix
Phone 1-800-833-9200*
Address Tektronix, Inc.
Department or name (if known)
14200 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
Web site www.tektronix.com
Sales
support
1-800-833-9200, select option 1*
Service
support
1-800-833-9200, select option 2*
Technical
support
Email: techsupport@tektronix.com
1-800-833-9200, select option 3*
1-503-627-2400
6:00 a.m. -- 5:00 p.m. Pacific time
* This phone number is toll free in North America. After office
hours, please leave a voice mail message.
Outside North America, contact a Tektronix sales office or
distributor; see the Tektronix web site for a list of offices.
TDS3000 & TDS3000B Operator Training Kit Manual
Contacting Tektronix
Phone 1-800-833-9200*
Address Tektronix, Inc.
Department or name (if known)
14200 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
Web site www.tektronix.com
Sales
support
1-800-833-9200, select option 1*
Service
support
1-800-833-9200, select option 2*
Technical
support
Email: techsupport@tektronix.com
1-800-833-9200, select option 3*
1-503-627-2400
6:00 a.m. -- 5:00 p.m. Pacific time
* This phone number is toll free in North America. After office
hours, please leave a voice mail message.
Outside North America, contact a Tektronix sales office or
distributor; see the Tektronix web site for a list of offices.
Contacting Tektronix
TDS3000 & TDS3000B Operator Training Kit Manual
Contacting Tektronix
TDS3000 & TDS3000B Operator Training Kit Manual
TDS 3000 Series Oscilloscopes – Operator Training Kit i
Table of Contents
Getting Started With TDS3000 Oscilloscopes ..........................1-1
Introduction to TDS3000 Oscilloscopes............................... 1-3
Features of the TDS3000 Models ................................... 1-3
Differences Between the TDS3000 Models .................... 1-5
Primary Front Panel Control Sections ................................. 1-9
VERTICAL Section Controls.......................................... 1-10
HORIZONTAL Section Controls.................................... 1-20
TRIGGER Section Controls........................................... 1-24
ACQUIRE Section Controls........................................... 1-33
Other Controls ............................................................... 1-40
Menu Function Controls..................................................... 1-42
MEASURE Menu Function Controls ............................. 1-43
SAVE/RECALL Menu Function Controls....................... 1-46
QUICKMENU Function Controls ................................... 1-50
CURSOR Menu Function Controls................................ 1-50
DISPLAY Menu Function Controls................................ 1-52
UTILITY Menu Function Controls.................................. 1-55
Setting Up a TDS3000 Oscilloscope ................................. 1-59
Grounding an Oscilloscope ........................................... 1-59
Safety Precautions ........................................................ 1-61
Introduction to the Training 1 Signal Board................... 1-63
Probe Compensation..................................................... 1-67
Summary.................................................................................1-72
Using VERTICAL Controls........................................................2-1
Setting Up VERTICAL Controls........................................... 2-2
TDS 3000 Series Oscilloscopes – Operator Training Kit i
Table of Contents
Getting Started With TDS3000 Oscilloscopes ..........................1-1
Introduction to TDS3000 Oscilloscopes............................... 1-3
Features of the TDS3000 Models ................................... 1-3
Differences Between the TDS3000 Models .................... 1-5
Primary Front Panel Control Sections ................................. 1-9
VERTICAL Section Controls.......................................... 1-10
HORIZONTAL Section Controls.................................... 1-20
TRIGGER Section Controls........................................... 1-24
ACQUIRE Section Controls........................................... 1-33
Other Controls ............................................................... 1-40
Menu Function Controls..................................................... 1-42
MEASURE Menu Function Controls ............................. 1-43
SAVE/RECALL Menu Function Controls....................... 1-46
QUICKMENU Function Controls ................................... 1-50
CURSOR Menu Function Controls................................ 1-50
DISPLAY Menu Function Controls................................ 1-52
UTILITY Menu Function Controls.................................. 1-55
Setting Up a TDS3000 Oscilloscope ................................. 1-59
Grounding an Oscilloscope ........................................... 1-59
Safety Precautions ........................................................ 1-61
Introduction to the Training 1 Signal Board................... 1-63
Probe Compensation..................................................... 1-67
Summary.................................................................................1-72
Using VERTICAL Controls........................................................2-1
Setting Up VERTICAL Controls........................................... 2-2
ii TDS 3000 Series Oscilloscopes – Operator Training Kit
Operating VERTICAL Controls............................................ 2-5
Using VERTICAL Controls to Modify Acquisition and
Display............................................................................. 2-5
Working with Channel Displays....................................... 2-9
Switching the Input Coupling......................................... 2-12
Using Vertical Offset Controls ....................................... 2-15
Using the MATH Menu .................................................. 2-20
Summary.................................................................................2-24
Using HORIZONTAL Controls ..................................................3-1
Setting Up HORIZONTAL Controls ..................................... 3-2
Operating HORIZONTAL Controls ...................................... 3-6
Affecting the Acquisition and Display of a Waveform...... 3-7
Changing the Zoom Mode Limits .................................. 3-12
Delaying the Acquisition of a Waveform........................ 3-15
Summary.................................................................................3-22
Using TRIGGER Controls .........................................................4-1
Setting Up TRIGGER Controls ............................................ 4-2
Operating TRIGGER Controls ............................................. 4-6
Using Edge Triggering..................................................... 4-6
Using Variable Trigger Holdoff ...................................... 4-10
Assigning Trigger Holdoff for an AM Signal .................. 4-12
Summary.................................................................................4-16
Using ACQUIRE Controls .........................................................5-1
Setting Up ACQUIRE Controls ............................................ 5-2
Operating ACQUIRE Controls ............................................. 5-7
Displaying Hidden Waveform Details.............................. 5-7
Stopping the Acquisition System..................................... 5-9
Using the Average and Envelope Acquisition Modes ... 5-12
Step Response.............................................................. 5-16
Summary.................................................................................5-22
ii TDS 3000 Series Oscilloscopes – Operator Training Kit
Operating VERTICAL Controls............................................ 2-5
Using VERTICAL Controls to Modify Acquisition and
Display............................................................................. 2-5
Working with Channel Displays....................................... 2-9
Switching the Input Coupling......................................... 2-12
Using Vertical Offset Controls ....................................... 2-15
Using the MATH Menu .................................................. 2-20
Summary.................................................................................2-24
Using HORIZONTAL Controls ..................................................3-1
Setting Up HORIZONTAL Controls ..................................... 3-2
Operating HORIZONTAL Controls ...................................... 3-6
Affecting the Acquisition and Display of a Waveform...... 3-7
Changing the Zoom Mode Limits .................................. 3-12
Delaying the Acquisition of a Waveform........................ 3-15
Summary.................................................................................3-22
Using TRIGGER Controls .........................................................4-1
Setting Up TRIGGER Controls ............................................ 4-2
Operating TRIGGER Controls ............................................. 4-6
Using Edge Triggering..................................................... 4-6
Using Variable Trigger Holdoff ...................................... 4-10
Assigning Trigger Holdoff for an AM Signal .................. 4-12
Summary.................................................................................4-16
Using ACQUIRE Controls .........................................................5-1
Setting Up ACQUIRE Controls ............................................ 5-2
Operating ACQUIRE Controls ............................................. 5-7
Displaying Hidden Waveform Details.............................. 5-7
Stopping the Acquisition System..................................... 5-9
Using the Average and Envelope Acquisition Modes ... 5-12
Step Response.............................................................. 5-16
Summary.................................................................................5-22
TDS 3000 Series Oscilloscope – Operator Training Kit iii
Using Menu Function Controls..................................................6-1
Setting Up Menu Function Controls..................................... 6-2
Operating the Menu Function Controls................................ 6-4
MEASURE Menu Function Controls ............................... 6-4
SAVE/RECALL Menu Function Controls....................... 6-16
QUICKMENU Function Control..................................... 6-22
CURSOR Menu Function Controls................................ 6-25
DISPLAY Menu Function Controls................................ 6-28
UTILITY Menu Function Controls.................................. 6-41
Summary.................................................................................6-44
Appendix A: Training 1 Signal Board: Signal Definitions….…..A-1
Appendix B: Glossary……………………………………………..B-1
TDS 3000 Series Oscilloscope – Operator Training Kit iii
Using Menu Function Controls..................................................6-1
Setting Up Menu Function Controls..................................... 6-2
Operating the Menu Function Controls................................ 6-4
MEASURE Menu Function Controls ............................... 6-4
SAVE/RECALL Menu Function Controls....................... 6-16
QUICKMENU Function Control..................................... 6-22
CURSOR Menu Function Controls................................ 6-25
DISPLAY Menu Function Controls................................ 6-28
UTILITY Menu Function Controls.................................. 6-41
Summary.................................................................................6-44
Appendix A: Training 1 Signal Board: Signal Definitions….…..A-1
Appendix B: Glossary……………………………………………..B-1
iv TDS 3000 Series Oscilloscopes – Operator Training Kit
iv TDS 3000 Series Oscilloscopes – Operator Training Kit
TDS 3000 Series Oscilloscopes – Operator Training Kit 1-1
1
Getting Started With TDS3000
Oscilloscopes
This module introduces the TDS3000 series of digital
phosphor oscilloscopes (DPO). In this module, you will
learn about the basic features, specifications, and
controls of a TDS3000 oscilloscope.
Note: All references to TDS3000 oscilloscopes also apply
to TDS3000B oscilloscopes, except as specified.
At the end of this module, you will be able to:
• Identify the primary front panel and the menu-based
controls of a TDS3000 oscilloscope.
• Set up a TDS3000 oscilloscope for general use.
• Compensate a passive probe.
TDS 3000 Series Oscilloscopes – Operator Training Kit 1-1
1
Getting Started With TDS3000
Oscilloscopes
This module introduces the TDS3000 series of digital
phosphor oscilloscopes (DPO). In this module, you will
learn about the basic features, specifications, and
controls of a TDS3000 oscilloscope.
Note: All references to TDS3000 oscilloscopes also apply
to TDS3000B oscilloscopes, except as specified.
At the end of this module, you will be able to:
• Identify the primary front panel and the menu-based
controls of a TDS3000 oscilloscope.
• Set up a TDS3000 oscilloscope for general use.
• Compensate a passive probe.
1-2 TDS 3000 Series Oscilloscopes – Operator Training Kit
This module includes the following sections:
• Introduction to TDS3000 Oscilloscopes
• Primary Front Panel Control Sections
• Menu Function Controls
• Setting Up a TDS3000 Oscilloscope
Figure 1.1 shows a TDS3000 oscilloscope.
Figure 1.1: A TDS3054 digital phosphor oscilloscope
1-2 TDS 3000 Series Oscilloscopes – Operator Training Kit
This module includes the following sections:
• Introduction to TDS3000 Oscilloscopes
• Primary Front Panel Control Sections
• Menu Function Controls
• Setting Up a TDS3000 Oscilloscope
Figure 1.1 shows a TDS3000 oscilloscope.
Figure 1.1: A TDS3054 digital phosphor oscilloscope
1
Getting Started With TDS3000 Oscilloscopes
1-3 TDS 3000 Series Oscilloscopes – Operator Training Kit
Introduction to TDS3000 Oscilloscopes
A TDS3000 oscilloscope is an advanced DPO (Digital
Phosphor Oscilloscope) that you can use for various
applications, such as servicing, repairing, manufacturing,
testing, and designing systems that include embedded,
computing, and communication systems.
Features of the TDS3000 Models
The following are the basic features of the TDS3000
series of oscilloscopes:
High bandwidth
The TDS3000 series of oscilloscopes have a bandwidth,
ranging from 100 MHz to 500 MHz.
Fast sample rate
The TDS3000 series of oscilloscopes have sample
rates, ranging from 1.25 GS/s to 5 GS/s on all channels
simultaneously.
Enhanced display
The TDS3000 series of oscilloscopes have a color LCD
display that shows all 4 channels at the same time, in
different colors.
1
Getting Started With TDS3000 Oscilloscopes
1-3 TDS 3000 Series Oscilloscopes – Operator Training Kit
Introduction to TDS3000 Oscilloscopes
A TDS3000 oscilloscope is an advanced DPO (Digital
Phosphor Oscilloscope) that you can use for various
applications, such as servicing, repairing, manufacturing,
testing, and designing systems that include embedded,
computing, and communication systems.
Features of the TDS3000 Models
The following are the basic features of the TDS3000
series of oscilloscopes:
High bandwidth
The TDS3000 series of oscilloscopes have a bandwidth,
ranging from 100 MHz to 500 MHz.
Fast sample rate
The TDS3000 series of oscilloscopes have sample
rates, ranging from 1.25 GS/s to 5 GS/s on all channels
simultaneously.
Enhanced display
The TDS3000 series of oscilloscopes have a color LCD
display that shows all 4 channels at the same time, in
different colors.
1
Getting Started With TDS3000 Oscilloscopes
1-4 TDS 3000 Series Oscilloscopes – Operator Training Kit
Waveform and instrument setup storage
The TDS3000 series of oscilloscope models have a
built-in floppy drive. The floppy drive can be used to
store waveforms, screen images, and instrument setups
on a 1.44 MB IBM PC-compatible floppy disk.
Flexibility
You can install a variety of application and
communication modules to expand the capabilities of a
TDS3000 oscilloscope according to your requirements.
For example, you can install application modules for FFT
operations, extended video triggering, and
telecommunications signal mask testing. You can also
install communication modules to provide GPIB, RS-232,
VGA, and Ethernet modules.
1
Getting Started With TDS3000 Oscilloscopes
1-4 TDS 3000 Series Oscilloscopes – Operator Training Kit
Waveform and instrument setup storage
The TDS3000 series of oscilloscope models have a
built-in floppy drive. The floppy drive can be used to
store waveforms, screen images, and instrument setups
on a 1.44 MB IBM PC-compatible floppy disk.
Flexibility
You can install a variety of application and
communication modules to expand the capabilities of a
TDS3000 oscilloscope according to your requirements.
For example, you can install application modules for FFT
operations, extended video triggering, and
telecommunications signal mask testing. You can also
install communication modules to provide GPIB, RS-232,
VGA, and Ethernet modules.
1
Getting Started With TDS3000 Oscilloscopes
TDS 3000 Series Oscilloscope – Operator Training Kit 1-5
Differences Between the TDS3000 Models
The TDS3000 series of oscilloscopes consists of six
base models. The following table lists the primary
differences between them (these models include the
TDS3000B models as well):
Models Number of
Channels
Bandwidth Maximum
Sample Rate
TDS3012 2 100 MHz 1.25 GS/s
TDS3014 4 100 MHz 1.25 GS/s
TDS3032 2 300 MHz 2.25 GS/s
TDS3034 4 300 MHz 2.25 GS/s
TDS3052 2 500 MHz 5 GS/s
TDS3054 4 500 MHz 5 GS/s
1
Getting Started With TDS3000 Oscilloscopes
TDS 3000 Series Oscilloscope – Operator Training Kit 1-5
Differences Between the TDS3000 Models
The TDS3000 series of oscilloscopes consists of six
base models. The following table lists the primary
differences between them (these models include the
TDS3000B models as well):
Models Number of
Channels
Bandwidth Maximum
Sample Rate
TDS3012 2 100 MHz 1.25 GS/s
TDS3014 4 100 MHz 1.25 GS/s
TDS3032 2 300 MHz 2.25 GS/s
TDS3034 4 300 MHz 2.25 GS/s
TDS3052 2 500 MHz 5 GS/s
TDS3054 4 500 MHz 5 GS/s
1
Getting Started With TDS3000 Oscilloscopes
1-6 TDS 3000 Series Oscilloscopes – Operator Training Kit
Preliminary Functional Check
Perform the following functional check procedure on a
TDS3000 oscilloscope to verify that it is functioning
properly.
1. Connect your TDS3000 oscilloscope to an AC
supply using the appropriate power cord and
adapters.
2. On the lower-left corner of the front panel of the
oscilloscope, push the ON/STANDBY button.
Wait until the display shows that the oscilloscope
has passed all self tests.
3. On the top of the front panel, push the
SAVE/RECALL menu button.
4. Push the appropriate bottom-screen menu button to
select Recall Factory Setup.
1
Getting Started With TDS3000 Oscilloscopes
1-6 TDS 3000 Series Oscilloscopes – Operator Training Kit
Preliminary Functional Check
Perform the following functional check procedure on a
TDS3000 oscilloscope to verify that it is functioning
properly.
1. Connect your TDS3000 oscilloscope to an AC
supply using the appropriate power cord and
adapters.
2. On the lower-left corner of the front panel of the
oscilloscope, push the ON/STANDBY button.
Wait until the display shows that the oscilloscope
has passed all self tests.
3. On the top of the front panel, push the
SAVE/RECALL menu button.
4. Push the appropriate bottom-screen menu button to
select Recall Factory Setup.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237

Tektronix TDS3000 Series Operator Training Kit Manual

Tektronix
Brand
Tektronix
Model
TDS3000 Series
Type
Operator Training Kit Manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents