Analog way QuickVu 4K Operating instructions

Type
Operating instructions

This manual is also suitable for

One rack kit is supplied with the device: Front ears (Ref: 180534)
(Compable with the following devices: Eikos 4K, Pulse 4K, QuickMatrix 4K and QuickVu 4K)
Rack mount installaon
Midra™ 4K units
CAUTION!
- Mounng using only the front rack ears is sucient for xed and mobile installaons.
Make sure to provide an adequate venlaon for the device. When installing it into the rack, make sure
no venlaon holes are blocked. The air intakes by the front panel and exhausts by the back of the unit.
- If required, front handles of the device can be dismantled, but with cauon. The removed screws must
not be reintroduced to their locaon without handles in place. Substanal damages can occur, including
risk of electric shock from the mains voltage.
To install the front ears:
1. Screw the ears on each side of the device using two M4x10 screws per side (M4x10 screws included in the
package).
2. Place the unit into the rack and screw the ears on the rack (screws not provided).
Front view of the unit with ears:
Side view of the unit with ears:
  • Page 1 1

Analog way QuickVu 4K Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI