Analog way QuickMatrix 4K, Eikos 4K, Pulse 4K, QuickVu 4K Operating instructions

Hello! I am an AI chatbot trained to assist you with the Analog way QuickMatrix 4K Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

One rack kit is supplied with the device: Front ears (Ref: 180534)

(Compable with the following devices: Eikos 4K, Pulse 4K, QuickMatrix 4K and QuickVu 4K)

Rack mount installaon

Midra™ 4K units

CAUTION!

- Mounng using only the front rack ears is sucient for xed and mobile installaons.

Make sure to provide an adequate venlaon for the device. When installing it into the rack, make sure

no venlaon holes are blocked. The air intakes by the front panel and exhausts by the back of the unit.

- If required, front handles of the device can be dismantled, but with cauon. The removed screws must

not be reintroduced to their locaon without handles in place. Substanal damages can occur, including

risk of electric shock from the mains voltage.

To install the front ears:

1. Screw the ears on each side of the device using two M4x10 screws per side (M4x10 screws included in the

package).

2. Place the unit into the rack and screw the ears on the rack (screws not provided).

Front view of the unit with ears:

Side view of the unit with ears: