Manual 0-5342 Rev. AA ©2014 Victor Technologies International, Inc
Display pCB (W7005699) iNsTRUCTiONs
Manual 0-5342
Revision No.: AA
Issue Date: June 20, 2014
Display PCB for Ultrafeed VAF-4
&VAF-4HD Wirefeeders
Part Number: W7005699
Instructions
The display PCB W7005699 is able to be used on both the Ultrafeed VAF-4 and the VAF-4HD wirefeeders. DIP switch
settings will need to be changed depending on which wirefeeder the W7005699 display PCB is used in.
1. Set the DIP switch according to the following tables before installing the W7005699 display PCB.
Wirefeeder SW1-1 SW1-2
Ultrafeed VAF-4 OFF ON
ON
1 2 3 4 5 6
DIP
Ultrafeed VAF-4HD ON ON
ON
1 2 3 4 5 6
DIP
Table 1 SW1-1 and SW1-2 Setting
2. Set other DIP switch settings according to the Power Source the Wirefeeder is connected to.
Power Source SW1-3 SW1-4 SW1-5
ArcMaster 401MST
ArcMaster 400MST
OFF ON ON
ON
1 2 3 4 5 6
DIP
Powermaster 550i OFF OFF OFF
ON
1 2 3 4 5 6
DIP
Powermaster 350i ON ON OFF
ON
1 2 3 4 5 6
DIP
Transmig 500i ON OFF OFF
ON
1 2 3 4 5 6
DIP
Other Power Sources
(Refer to Service Manual)
ON ON ON
ON
1 2 3 4 5 6
DIP
Table 2 SW 1-3, SW1-4 and SW1-5 Setting