TECHNICAL
BULLETIN
Date: 06/12/07
Product: ArcMaster Inverter Line By: David Willcocks
Subject: Operating voltages
Summary: 460V Single phase operation is not supported
THERMAL ARC TECHNICAL SUPPORT
Phone: 1-800-462-2782
Fax: 1-603-298-7402
www.thermadyne.com
Form 0001
82 Benning Street
West Lebanon, NH 03784
1-603-298-5711
Fax: 1-800-221-4401
“Exceeding Customer Expectations Through Performance Excellence"
Valued Thermadyne Customer,
In 2006 Thermal Arc released the complete next generation ArcMaster portable Inverter line.
Many of these units (200 amps and above) have multi-voltage capabilities 208-230VAC Single phase
and 208-230VAC / 460VAC Three phase.
It has come to our attention that some customers are using an input voltage of 460VAC Single phase.
This is not a recommended input voltage for the ArcMaster line. Use on this voltage could cause
premature product failure and the voiding of warranty.
Please refer to the Specification page of the ArcMaster Technical Sales literature or the product
Operating Manual for the correct input voltage requirements.
For More information Contact: