iiyama OMK3-1 User manual

iiyama
Brand
iiyama
Model
OMK3-1
Type
User manual

iiyama OMK3-1 is a mounting kit for iiyama ProLite TF1215MC and ProLite TF2215MC monitors. It allows the user to mount the monitors in an open frame configuration. The kit includes Mount-Brackets (Bracket A), L-Brackets (Bracket B), and Bracket Screws M4x6.

The Mount-Brackets and L-Brackets are designed to be mounted to specific wall types and hardware, in accordance with the installation instructions. Using Mount-Brackets, L-Brackets or screws other than those specified in the installation instructions may damage the monitor.

The position of the L-bracket can be either 0 mm or 20.0 mm from the front of the monitor depending on which screw holes you choose for mounting it.

iiyama OMK3-1 is a mounting kit for iiyama ProLite TF1215MC and ProLite TF2215MC monitors. It allows the user to mount the monitors in an open frame configuration. The kit includes Mount-Brackets (Bracket A), L-Brackets (Bracket B), and Bracket Screws M4x6.

The Mount-Brackets and L-Brackets are designed to be mounted to specific wall types and hardware, in accordance with the installation instructions. Using Mount-Brackets, L-Brackets or screws other than those specified in the installation instructions may damage the monitor.

The position of the L-bracket can be either 0 mm or 20.0 mm from the front of the monitor depending on which screw holes you choose for mounting it.

MOUNTING KITS
　
User manual
M099A09
CHECKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or
damaged, please contact your local iiyama dealer or regional iiyama oce.
■
Mount-Bracket (Bracket A) : 6pcs (7221771A301: 2pcs for ProLite TF1215MC, 7221769A0101: 4pcs for ProLiteTF2215MC)
■
L-Bracket (Bracket B) : 6pcs (7221772A0201: 2pcs for ProLite TF1215MC, 7221768A0101: 4pcs for ProLite TF2215MC)
■
Bracket Screw M4×6 : 16pcs (8pcs for ProLite TF1215MC , 16pcs for ProLite TF2215MC)
■
User Manual (this document)
For ProLite TF1215MC, ProLite TF2215MC
Attach the monitor from the front side of the recess and x with the screws.
(Screws:
ProLite TF1215MC
: 4 pcs, ProLite TF2215MC: 8 pcs)
Bracket A/B
Screw
x 2 x 4
Bracket A/B
SPECIAL NOTES
Mount-Brackets, L-Brackets and screws are necessary to install an open frame monitor.
TheMount-BracketsandL-Bracketsaredesignedtobemountedtospecicwalltypesandhardware,inaccordance
with the installation instructions.
UsingMount-Brackets,L-Bracketsorscrewsotherthanthosespeciedintheinstallationinstructionsmaydamage
the monitor.
As shown in gure below, tighten Bracket A to B using the screws supplied.
(Bracket A/B: ProLite TF1215MC: 2 pcs each, ProLite TF2215MC: 4 pcs each
Screws:
ProLite TF1215MC
: 4 pcs, ProLite TF2215MC: 8 pcs)
Attach the Bracket A/B( ) to the back of the recess, where the monitor is to be attached, and x it with screws.
(Customer’s screws: ProLite TF1215MC: 4 pcs, ProLite TF2215MC: 8 pcs)
CAUTION
Bracket B
Bracket A
Bracket A
Screw
x 2
NOTE
20.0mm
Front of the Monitor
Screw holes for
mounting the chassis
You will need a screwdriver to mount the Bracket A/B.
Brackets A/B and screws are necessary to install an open frame monitor.
For details regarding the operating temperature and humidity conditions, see
specication of this User Manual.
The position of the L-bracket can be either 0 mm or 20.0 mm from the front
of the monitor depending on which screw holes you choose for mounting it.
Bracket A/B
Bracket A/B
Screw
x 2 x 2
ProLite TF1215MC ProLite TF2215MC
Screw
x 2
Back of the recess
Bracket A/B
Two options to apply the mount:
"A" = M4 threaded screw holes
"B" = M4 holes without screw thread
R8.5 x4
542.55
337.5
517.0
200.0
312.0
200.0
●
Bracket dimensions

ProLite TF2215MC
1.0 mm
Screw holes for
mounting the chassis
Screw holes for
mounting the monitor
M4
M4
240.0 mm
2.0 mm
35.0mm
25.2mm
180.0 mm
200.0 mm
8.35mm
4.2 mm
137.5 mm
20.0mm
Screw holes for
fixing the bracket
M4
23.0mm
1.0 mm
220.0 mm
14.0mm
12.0mm
6.65mm
7.0mm
M4
Screw holes for
fixing the bracket
240.0 mm
180.0 mm
<Bracket A> <Bracket B>
<Mount size>

ProLite TF1215MC
<Bracket A>
1.0 mm
Screw holes for
mounting the chassis
Screw holes for
mounting the monitor
M4
M4
135.0 mm
1.6 mm
34.0mm
25.2mm
90.0 mm
120.0 mm
5.5mm
4.2 mm
60.0 mm
20.0mm
Screw holes for
fixing the bracket
M4
22.0mm
80.0 mm
1.0 mm
135.0 mm
90.0 mm
120.0 mm
14.0mm
12.0mm
5.3mm
7.0mm
M4
8.0mm
Screw holes for
fixing the bracket
70.0 mm
<Bracket B>

ProLite TF1215MC

ProLite TF2215MC
Two options to apply the mount:
"A" = M4 threaded screw holes
"B" = M4 holes without screw thread
R9.50±0.3 x4
338.0”A”
305.5±0.4
245.0±0.4
98.0”B”
70.0”A”
333.3”B”
  • Page 1 1
  • Page 2 2

iiyama OMK3-1 User manual

iiyama
Brand
iiyama
Model
OMK3-1
Type
User manual

iiyama OMK3-1 is a mounting kit for iiyama ProLite TF1215MC and ProLite TF2215MC monitors. It allows the user to mount the monitors in an open frame configuration. The kit includes Mount-Brackets (Bracket A), L-Brackets (Bracket B), and Bracket Screws M4x6.

The Mount-Brackets and L-Brackets are designed to be mounted to specific wall types and hardware, in accordance with the installation instructions. Using Mount-Brackets, L-Brackets or screws other than those specified in the installation instructions may damage the monitor.

The position of the L-bracket can be either 0 mm or 20.0 mm from the front of the monitor depending on which screw holes you choose for mounting it.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents