iiyama ProLite TF1734MC-B6X User manual

Type
User manual

The iiyama ProLite TF1734MC-B6X is a high-quality LCD monitor designed to meet the needs of both professional and home users. It features a 17-inch display with a resolution of 1280x1024 pixels, providing ample screen space for work, gaming, and entertainment. The monitor also boasts a fast response time of 14ms, making it ideal for fast-paced games and videos. Additionally, its wide viewing angles ensure that you'll get a clear and accurate picture even when looking at the screen from an angle.

The iiyama ProLite TF1734MC-B6X is a high-quality LCD monitor designed to meet the needs of both professional and home users. It features a 17-inch display with a resolution of 1280x1024 pixels, providing ample screen space for work, gaming, and entertainment. The monitor also boasts a fast response time of 14ms, making it ideal for fast-paced games and videos. Additionally, its wide viewing angles ensure that you'll get a clear and accurate picture even when looking at the screen from an angle.

ENGLISH
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the monitor.
Please keep this manual in a safe place for
your future reference.
USER MANUAL
ENGLISH
ENGLISH
We reserve the right to change specifi cations without notice.
All trademarks used in this user manual are the property of their respective owners.
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the
address: http://www.iiyama.com
You can access the Web page of diff erent countries from there.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas, business and light industrial premises and small-scale enterprises, inside as
well as outside of the buildings. All places of operation are characterised by their connection to
the public low voltage power supply system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PLTF1534, PLTF1734, PLTF1934
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................3
CLEANING ......................................................................................3
BEFORE YOU OPERATE THE MONITOR ..........................................4
FEATURES......................................................................................4
CHECKING THE CONTENTS OF THE PACKAGE ........................5
SPECIAL NOTES ON THE TOUCH PANEL ...................................5
INSTALLATION ...............................................................................6
CONTROLS AND CONNECTORS..................................................7
SPECIAL NOTES ...........................................................................8
CONNECTING YOUR MONITOR .................................................10
COMPUTER SETTING .................................................................12
OPERATING THE MONITOR .............................................................13
ADJUSTMENT MENU CONTENTS ..............................................15
SCREEN ADJUSTMENTS ............................................................19
POWER MANAGEMENT FEATURE .............................................22
TROUBLE SHOOTING ......................................................................23
RECYCLING INFORMATION .............................................................24
APPENDIX ........................................................................................25
SPECIFICATIONS : ProLite TF1534MC-B6X ...............................25
SPECIFICATIONS : ProLite TF1734MC-B6X ...............................26
SPECIFICATIONS : ProLite TF1934MC-B6X ...............................27
DIMENSIONS : ProLite TF1534MC ..............................................28
DIMENSIONS : ProLite TF1734MC ..............................................28
DIMENSIONS : ProLite TF1934MC ..............................................28
DIMENSIONS : L-BRACKET.........................................................29
COMPLIANT TIMING ....................................................................29
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerous and can cause fi re or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
re or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause fi re, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause re or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specifi ed power supply. Use of an incorrect voltage will
cause malfunction and may cause fi re or electric shock.
CORRECT USE OF THE AC ADAPTER
Use only the AC Adapter provided by iiyama. Any deviation from this by using another type of
adapter may result in damage to the accessory and the monitor by fi re or electric shock.
DO NOT DISASSEMBLE THE AC ADAPTER
Disassembling the AC Adapter may expose you to the danger of fi re or electric shock.
PROTECT THE CABLES
Do not pull or bend the AC adapter, the power cable and signal cable. Do not place the monitor or
any other heavy objects on the cables. If damaged, the cables may cause fi re or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smoky areas as it may cause re, electric shock or damage. You should also avoid areas where the
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
re. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may
also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause fi re or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to
avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the AC adapter, the power cable or signal cable, always pull it by the plug. Never pull
on the cable itself as this may cause fi re or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
REMARK FOR 24/7 USAGE
This product is not specifi cally designed for 24/7 usage in all environments.
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
OTHERS
ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE

When you rst turn on the LCD monitor, the picture may not t in the display area
because of the type of computer that is used. In this case, adjust the picture position
to the correct position.

You may nd slightly uneven brightness on the screen depending on the desktop
pattern you use.

Due to the nature of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for hours. In
this case, the screen is recovered slowly by changing the image or turning off the
Power Switch for some hours.
SPECIAL NOTES ON LCD MONITORS
NOTE

If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
WARNING

If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
NOTE

To protect the Touch screen surface, do not scratch or rub the screen with a hard
object.

Never use any of the following strong solvents. These will damage the cabinet and
the Touch screen surface.
Abrasive cleaner Wax Solvent

Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
CABINET
Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
TOUCH
SCREEN
Touch screen surface may be cleaned using a soft clean cloth moistened with mild
window glass commercial cleaners or 50/50 mixture of water and IPA(ISO-propyl-
alcohol). Don’t use acid or alkaline solvent to clean the surface of the panel (or
screen).
CUSTOMER SERVICE
CLEANING
ENGLISH
4 BEFORE YOU OPERATE THE MONITOR
BEFORE YOU OPERATE THE MONITOR
FEATURES
Supports Resolutions up to 1024 × 768 : ProLite TF1534MC
Supports Resolutions up to 1280 × 1024 : ProLite TF1734MC / ProLite
TF1934MC
High Contrast 700:1 (Typical) / Brightness 330cd/m
2
(Typical: with Touch panel)
: ProLite TF1534MC
High Contrast 1000:1 (Typical) / Brightness 315cd/m
2
(Typical: with Touch
panel) : ProLite TF1734MC / ProLite TF1934MC
Digital Character Smoothing
Automatic Set-up
Power Management (VESA DPMS Compliant)
VESA Mounting Standard (100mm×100mm) Compliant
IP65 Standard Compliant (Only front face)
Anti fi ngerprint fi nish
Windows8/8.1/10 touch environment
Basic touch operations can be performed under Windows 8/8.1/10.
However, please be informed that full touch functionality and normal operational performance are
not guaranteed.
ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyama offi ce.
*
1
1. TO USERS IN 120V AREA
The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/250V
must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable or AC adapter not supplied by iiyama.
2. Applicable AC Adapter
AC Adapter Type Name : ADP-50YH B (DELTA ELECTRONICS, INC.)
3.
An approved power cable greater or equal to H05VVF, 3G, 0.75mm
2
must be used.
*
2
This CD-ROM contains the touch screen driver software.
Install the Touch Panel Driver Disk after connecting the computer to the monitor
with USB Cable. For the details, see Readme fi le in the Touch Panel Driver Disk.
Power Cable*
1

AC Adapter*
1
HDMI Cable
DisplayPort Cable

USB Cable

Cable Cover Screw (M3x6 1pcs)

L-Bracket (2pairs)

Bracket Screw (M4×8 8pcs)

Touch Panel Driver Disk (CD-ROM)*
2
Safety Guide
Quick Start Guide


MOUNTING KITS User manual
CHECKING THE CONTENTS OF THE PACKAGE
CAUTION
Permanent damage can occur if Sharp Edged, Pointed or Metal items are used to activate Touch.
This could invalidate any remaining warranty.
We recommend you use a plastic stylus (tip R0.8 or over) or fi nger.
SPECIAL NOTES ON THE TOUCH PANEL
CAUTION
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR
When you use with the wall mounting, in consideration of thickness of the mounting
stage, tighten the M4 Screw with washer which “L” length is 8mm
(TF1534MC) or
6mm(TF1734MC/TF1934MC)
to fasten the monitor. Using the screw longer than this
may cause electric shock or damage because it may contact with the electrical parts
inside the monitor.
WARNING
Screw
Chassis
Mounting Stage
INSTALLATION
< WALL MOUNTING >
WARNING

Before installation, make sure the wall, ceiling or desktop arm is strong enough to
hold the necessary weight of the display and the mount.
This product is not designed for the purpose of being used in high temperature
environment.
If the product is placed in an external cabinet, you need to design cooling fans
and vents to keep the temperature low enough to fit in the product temperature
specifi cation.
WARNING
< BUILT-IN EQUIPMENT >
This monitor is designed to be compatible in landscape, portrait and face-up modes.
A
Not Available
< ROTATING THE MONITOR >
A
A
Landscape
Portrait
A
Portrait
Face-up
Available
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
CONTROLS AND CONNECTORS
Menu Button (MENU)*
Scroll Up / Brightness Button ( )*
Scroll Down / Contrast Button ( )*
Select Button (SELECT)*
Power Switch ( )*
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
USB Connector (USB)
Remote Control Touch V01 Connector (RJ11)
VGA Connector (VGA)
HDMI Connector (HDMI)
DisplayPort Connector (DP)
Connector for AC Adapter( : Direct current) (DC)
* Remote Control Touch V01 is optional.
NOTE
<Front> <Back>
Remote Control
Touch V01*
ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
SPECIAL NOTES
L-Brackets and screws are necessary to install an open frame monitor.
The L-Brackets are designed to be mounted to specific wall types and
hardware, in accordance with the installation instructions supplied with the
Mounting Kit.
Using L-Bracket or screws other than those specified in the installation
instructions may damage the monitor.
As shown in fi gure below, tighten Bracket A to B using the screws supplied (2pairs of 2 pcs).
Depending on the monitor orientation (portrait or landscape) you choose, mount the L-Brackets
to the left and right hand sides or the upper and lower sides of the monitor and tighten them with
screws supplied (2 pairs of 2 pcs).
CAUTION
or
Both Sides
Upper and Lower Sides
L-Bracket
L-Bracket
L-Bracket
L-Bracket
or
Bracket B
Bracket B
Bracket A
Bracket A
Side View
Side View
Bracket A
Bracket B
Bracket B
Bracket A
ENGLISH
BEFORE YOU OPERATE THE MONITOR 9
NOTE
2.9mm
44.9mm
Front of the Monitor
Screw holes for
mounting the chassis
You will need a screwdriver to mount the L-Bracket.
L-Brackets and screws are necessary to install an open frame monitor. For details
regarding open frame monitor temperature and humidity operating conditions, see the
User Manual on IIYAMA website. http://www.iiyama.com.
<ProLite TF1534MC-B6X>
The position of the L-bracket can be either 1.3 mm or 40.7 mm from the front of the
monitor depending on which screw holes you choose for mounting it.
<ProLite TF1734MC-B6X / ProLite TF1934MC-B6X>
The position of the L-bracket can be either 2.9 mm or 44.9 mm from the front of the
monitor depending on which screw holes you choose for mounting it.
<ProLite TF1534MC-B6X> <ProLite TF1734MC-B6X /
ProLite TF1934MC-B6X>
40.7mm
Front of the Monitor
Screw holes for
mounting the chassis
1.3mm
ENGLISH
10 BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR
Ensure that both the computer and the monitor are switched off .
Connect the computer to the monitor with the signal cable.
Connect the computer to the monitor with the USB Cable.
Connect the monitor cable to the Remote Control Touch V01 (option), if necessary.
Connect the AC Adapter to the monitor and the Power Cable to the AC Adapter rst and then
connect to the power source.
Turn on your monitor and computer.
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama offi ce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
Make sure you tighten the fi nger screws at each end of the Signal Cable.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
[Example of Connection]
<Back>
NOTE
Power Cable
(Accessory)
Computer
VGA Cable (Not included)*
DisplayPort Cable (Accessory)
USB Cable (Accessory)
AC Adapter
(Accessory)
Remote
Control
Touch V01
(option)
HDMI Cable (Accessory)
* VGA cable is not supplied with the monitor. If you use low quality VGA cable, it may cause a result
of electro-magnetic interference. Please contact the iiyama Support Centre in your country if you
wish to connect the monitor via the VGA input.
ENGLISH
BEFORE YOU OPERATE THE MONITOR 11
[Fitting and Removal of Cable Cover]
Put a piece of soft cloth on the table beforehand
to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face
down.
< Removal >
Remove the cable cover as shown in Step1.
< Fitting >
Connect the cables, as shown in Step2,
place the cable cover and x it fi rmly using a
screw.
Step 1
Cable Cover
Step 2
Screw
ENGLISH
12 BEFORE YOU OPERATE THE MONITOR
Procedure for turning ON the Power Switch
Turn ON the monitor fi rst, and then the computer.

Touch screen driver software
Touch screen driver software and system may not start when you start your computer while
touching the screen.
Touch screen driver software may not run due to the power saving function depending on the
BIOS of your computer. In this case, set the power saving function to off .
Signal Timing
Change to the desired signal timing listed on page 29: COMPLIANT TIMING.
Windows XP/Vista/7/8/8.1/10 Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs
on Windows XP/Vista/7/8/8.1/10 by connecting the monitor to DDC2B compliant computer with
the Signal Cable supplied.
For installation on Windows XP: The monitor Information File for iiyama monitors may be
necessary for your computer and obtained via the Internet, using the address:
http://www.iiyama.com

For additional information on how to download the driver for your touch screen monitor,
please access the internet site noted above.

Monitor Drivers are not required in most cases for Macintosh or Unix operating
systems. For further information, please contact your computer dealer fi rst for advice.
COMPUTER SETTING
NOTE

TOUCH support operation system
Microsoft Windows XP (64 bit and 32 bit) Microsoft Windows Vista (64 bit and 32 bit)
Microsoft Windows 7 (64 bit and 32 bit) Microsoft Windows 8 / 8.1 / 10 (64 bit and 32 bit)
Microsoft Windows CE 2.13 / 3.0, net 6.0 Mac OS9.x, OS X V10.4/10.5/10.6 & above
Linux (Kernel2.4, 2.6x) & above Not support earlier versions.
Windows8/8.1/10 Windows7*
5
Windows7*
4
Vista XP
Default mouse*
1
Touch digitizer*
2
Windows7 gestures*
3
2K Windows CE XP Embedded Mac OS9,OSX Linux
Default mouse*
1
Touch digitizer*
2
Windows7 gestures*
3
*
1
Default mouse (click, drag, double-click and right-click)
*
2
Touch digitizer (click, drag /selection, double-click, right-click, fl ick and visual feedback)
*
3
Digitizer with Windows 7 touch gestures
*
4
Windows 7 - Starter and Home Basic version
*
5
Windows 7 - Home Premium, Professional, Enterprise and Ultimate versions
ENGLISH
OPERATING THE MONITOR 13
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 29. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 19 for SCREEN ADJUSTMENTS.
Press the MENU Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the
/ Buttons.
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Use the SELECT Button to highlight the desired adjustment icon.
Use the / Buttons to make the appropriate adjustment or setting.
Press the MENU Button to leave the menu, and the settings you just made would be
automatically saved.

When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the OSD Timeout has passed.
MENU button can be used to return previous menu item.

Any changes are automatically saved in the memory when the On Screen Display
disappears.
Turning off the power should be avoided while using the Menu.

Adjustments for H/V-Position, Clock and Phase are saved for each signal timing. Except for these
adjustments, all other adjustments have only one setting which applies to all signal timings.
NOTE
For example, to correct for vertical position, select Menu item of Picture. Then, select V-Position
by using the SELECT Button.
Use the
/ Buttons to change the vertical position settings. The vertical position of the
overall display should be changing accordingly while you are doing this.
Press the MENU Button lastly, it ends, all changes are saved in the memory.
Picture Advanced
OSD
Option
Contrast
Brightness
H-Position
V-Position
Phase
Clock
Auto Adjust
Picture Advanced
OSD
Option
V-Position
ENGLISH
14 OPERATING THE MONITOR

TOUCH FUNCTION DISABLE:
ON: Pressing and holding of the MENU Button and the SELECT Button at the same time when
the Menu is not displayed, massage "TOUCH DISABLE" will appear on the top right corner.
OFF: Pressing and holding of the MENU Button and the SELECT Button at the same time for
about 5 seconds when the Menu is not displayed, till "TOUCH DISABLE" disappears.

LOCK MODE:
Simultaneously press the MENU button and the
button when an image is displayed through
VGA, HDMI or DisplayPort.
* The OSD menu is not displayed when the OSD is locked. Press the MENU button and the
button simultaneously again.
The following OSD menu is displayed.
Direct
Adjustment Item Problem / Option
OSD
POWER
Inactive
Active
The POWER SWITCH is Locked.
The POWER SWITCH is Unlocked.
Inactive
Active
The OSD menu is Locked.
The OSD menu is Unlocked.
ENGLISH
OPERATING THE MONITOR 15
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option Button to Press
Too dark
Too bright
Brightness*
1
Contrast
Too dull
Too intense
*
1
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
*
2
See page 19 for SCREEN ADJUSTMENTS.
*
3
For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 19 for
SCREEN ADJUSTMENTS.
*
4
Only Analog Input.
You can skip the Menu items and directly display an adjustment scale by using the following button
operations.

Contrast: Press the
Button when the Menu is not displayed.

Brightness: Press the
Button when the Menu is not displayed.
Direct
Direct
Picture Advanced
OSD
Option
Contrast
Brightness
H-Position
V-Position
Phase
Clock
Auto Adjust
Direct
Phase*
2,4
Clock*
2,4
Too left
Too right
Too low
Too high
H-Position*
4
V-Position*
4
Too narrow
Too wide
To correct fl ickering text or lines
Auto Adjust*
3,4
Adjust H/V-Position, Clock and Phase automatically.
Picture
ENGLISH
16 OPERATING THE MONITOR
Picture Advanced
OSD
Option
Color Temp
Red
Green
Blue
Sharpness
User
Adjustment Item Problem / Option Button to Press
Greenish white
Yellowish white
Green
Red
Too weak
Too strong
User
Reddish white
Bluish white9300
Color Temp
5500
6500
7500
Blue
Sharpness
You can change the picture quality from 0 to 100
(soft to sharp).
Press the Button to change the picture quality in
numerical order. Press the
Button to change the
picture quality in reverse numerical order.
Adjust the picture quality at resolutions of less 1024
x 768(ProLite TF1534MC) / 1280 x 1024(ProLite
TF1734MC/ProLite TF1934MC). You can change
the picture quality.
Advanced
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33

iiyama ProLite TF1734MC-B6X User manual

Type
User manual

The iiyama ProLite TF1734MC-B6X is a high-quality LCD monitor designed to meet the needs of both professional and home users. It features a 17-inch display with a resolution of 1280x1024 pixels, providing ample screen space for work, gaming, and entertainment. The monitor also boasts a fast response time of 14ms, making it ideal for fast-paced games and videos. Additionally, its wide viewing angles ensure that you'll get a clear and accurate picture even when looking at the screen from an angle.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI