Page is loading ...
MOUNTING KITS
User manual
CHECKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or
damaged, please contact your local iiyama dealer or regional iiyama o ce.
Mount-Bracket (Bracket A) : 4pcs (7221316A101: 2pcs for ProLite TF1534MC / ProLite TF1634MC / ProLite TF1734MC / ProLite
TF1934MC, 7221354A101: 2pcs for ProLite TF2234MC)
L-Bracket (Bracket B) : 2pcs (7221317A0101:2pcs for ProLite TF1534MC / ProLite TF1634MC / ProLite TF1734MC / ProLite
TF1934MC / ProLite TF2234MC)
Bracket Screw M4x8 : 8pcs (8pcs for ProLite TF1534MC / ProLite TF1634MC / ProLite TF1734MC / ProLite TF1934MC / ProLite
TF2234MC)
User Manual (this document)
SPECIAL NOTES
Mount-Brackets, L-Brackets and screws are necessary to install an open frame monitor.
The Mount-Brackets and L-Brackets are designed to be mounted to speci c wall types and hardware, in accor-
dance with the installation instructions supplied with the Mounting Kit.
Using Mount-Brackets, L-Brackets or screws other than those speci ed in the installation instructions may dam-
age the monitor.
1.Depending on the monitor orientation (portrait or landscape) you choose, mount the Brackets A to the left and right hand sides or the
upper and lower sides of the monitor and tighten them with screws supplied (2 pairs of 2 pcs).
2.As shown in gure below, tighten Bracket B to A using the screws supplied (2 pairs of 2 pcs).
CAUTION
or
Bracket B
Bracket B
Bracket A
Bracket A
Side View
Side View
Bracket A
Bracket B
Bracket B
Bracket A
or
Both Sides
Upper and Lower Sides
Bracket A/B
Bracket A/B
Bracket A/B
Bracket A/B
For ProLite TF1534MC, ProLite TF1634MC, ProLite TF1734MC, ProLite TF1934MC, ProLite TF2234MC
n
ProLite TF1534MC, ProLite TF1634MC, ProLite TF1734MC, ProLite TF1934MC
186.0 mm
20.0mm
1.0 mm
37.4mm
1.0 mm
220.0 mm
4.1mm
51.6mm
5.0mm
8.0mm
4.3 mm
10.5mm
130.0 mm
M4
M4
21.0mm
3.7mm
142.0 mm
Screw holes for
mounting the chassis
Screw holes for mounting the monitor
Screw holes for
fixing the bracket
Bracket dimensions
186.0 mm
20.0mm
1.0 mm
37.4mm
5.0mm
8.0mm
4.3 mm
10.5mm
130.0 mm
M4
Screw holes for
mounting the chassis
170.0 mm
1.0mm
142.0mm
21.0mm
46.5mm
170.0mm
7.0mm
3.7mm
M4
Screw holes for
fixing the bracket
Screw holes for mounting the monitor
<Bracket A>
<Bracket B>
n
ProLite TF2234MC
n
ProLite TF1534MC, ProLite TF1634MC, ProLite TF1734MC, ProLite TF1934MC
NOTE
You will need a screwdriver to mount the Bracket A/B.
Brackets A/B and screws are necessary to install an open frame monitor. For de-
tails regarding open frame monitor temperature and humidity operating conditions,
see the User Manual on IIYAMA website. http://www.iiyama.com.
ProLite TF1534MC, ProLite TF1634MC:
The position of the L-bracket can be either 1.3 mm or 40.7 mm from the front of
the monitor depending on which screw holes you choose for mounting it.
ProLite TF1734MC, ProLite TF1934MC, ProLite TF2234MC:
The position of the L-bracket can be either 2.9 mm or 44.9 mm from the front of
the monitor depending on which screw holes you choose for mounting it.
1.3mm
or
2.9mm
40.7mm
or
44.9mm
Front of the Monitor
Screw holes for
mounting the chassis
or
Both Sides
Upper and Lower Sides
L-Bracket
L-Bracket
L-Bracket
L-Bracket
Bracket A
Bracket B
Side View
or
Side View
Bracket B
Bracket B
Bracket B
Bracket A
Bracket A
Bracket A
n
ProLite TF2234MC
<Bracket A>
<Bracket B>
/