Page is loading ...
Operation Manual
Functional
In normal display mode shows: day of week- hour -minute - second
Calendar display mode: Press D button to shows month and date
Modes change: Press B button
Backlight Press ‘A’ button
User selectable 12/24-hour format
Modes of watch
In normal display modes: Press B chronograph mode alarm setting mode time setting mode
Chronograph functions
In normal display mode: Press B once enter chronograph mode Press D to start Press D to stop
Press B to exit Press D to stop Press C to read time Press C to lap time Press C to reset
Set up to alarms
Hours: In normal display Mode, Press B twice and "the hours" will flashing
Press D to reach the correct hour for your alarm. Pay attention to AM/PM
Minutes: Press C and the minutes will flash. Press D to reach the correct minutes.
Press B to save / exit. Congratulations! Your first alarm is now set.
Set time & date
In normal display Mode, Press B three times to enter setting mode and "the seconds" will flashing.
Minutes: Press C and the minutes will flash. Press D to reach the correct minutes
Hours: Press C and the hour will flash. Press D to reach the correct hour. (Pay attention to AM/PM,
“H” is 24 hour format)
Date: Press C and the date will flash. Press D to reach the current date
Months: Press C and the number of the month will flash. Press D to advance to the number of the current month (1=January,
2=February ...)
Day of Week: Press C and the day of the week will flash. Press D to advance to the current day (MO=Monday, TU=Tuesday ...)
Press B to exit. Congratulations! Your watch is now set.
Alarm ON/OFF
In normal display Mode, hold Press D and C be shows “alarm” on of alarm, same as action, if the “alarm”be
disappiars,
it’s off of alarm.
Chime of every hour ON/OFF
In normal display hold C and then Press B be show all icon of week is ON chime, same as action, if the week’s icon be disappears,
it’s OFF of chime.
Skmei watch direct sales
www.skmei-watch.com
/
