Skmei 1196 User manual

Operation Instruction

Functional

In normal display mode shows: day of week- hour -minute - second

Modes change: press S3 button

Backlight tap ‘S2’ button

User selectable :press “S1”12/24-hour format

Modes of watch

In normal display modes: press S3 chronograph mode alarm setting mode time setting mode

Set up to alarms

Hours: In normal display Mode, press S3 twice to the alarm mode ,press S2 and "the hours" will flashing

press S1 to reach the correct hour for your alarm. Pay attention to AM/PM

Minutes: press S2 and the minutes will flash. press S1 to reach the correct minutes.

Tap S3 to save / exit. Congratulations! Your first alarm is now set.

Chronograph functions

In normal display mode: press S3 one enter chronograph mode press S1 to start press S1 to stop

press S3 to exit press S1 to stop press S2 to read time press S2 to lap time press S2 to reset

Set time & date

In normal display Mode, press S3 three times to enter setting mode and "the seconds" will flashing.

Hours: press S2 and the hours will flash. press S1 to reach the correct hours(Pay attention to AM/PM,

“H” is 24 hour format)

Minutes: press S2 and the minutes will flash. press S1 to reach the correct minutes.

Months: press S2 and the number of the month will flash. press S1 to advance to the number of the current month

(1=January, 2=February ...)

Date: press S2 and the date will flash. press S1 to reach the current date

Week: press S2 and the day of the week will flash. press S1 to advance to the current day (MO=Monday,

TU=Tuesday ...)

Tap S3 to exit. Congratulations! Your watch is now set.

Alarm and chime ON/OFF

In alarm display Mode, press S1 and the “alarm” on of alarm, same as action, if the “alarm”be disappiars,it’s off of

alarm. again S1 and the “chime”on of alarm, same as action, if the “chime” disappears, it’s OFF of chime.

Press S1 Clock adjustment

Download PDF