2. George Kovacs
  3. P305-1-044-L

George Kovacs P305-1-044-L, P305-1-654-L User manual

  • Hello, I am a chat assistant and I've reviewed the installation instructions for the Minka Group table lamp models P305-1-044-L and P305-1-654-L. This document describes how to install the lamp, connect the power, and use its touch dimmer with three brightness levels. I'm ready to answer your questions about this device and its features.
  • What should I do before plugging in the lamp?
    How many brightness settings does the lamp have?
    What should I do if I need to adjust the arm?
    Who should install the fixture?
Installation Instruction
For Table Lamp
Model# P305-1-044-L
Model# P305-1-654-L
WARNING:
Risk of shock, do not plug in the unit before assembly is complete.
Do not exceed the maximum wattage rating. (Ne pas depasser la puissance
nominale maximale!)
Before turning on, please follow the instruction manual step by step.
INSTALLATION
1.
Carefully unpack your new lamp and place all parts on a smooth, flat
surface to protect the finish until ready to install.
2.
Connect the power adapter (A) to connector (B).
3.
Plug into power outlet and test your new fixture. Adjust the arm location as
desired.
4.
This lamp uses a touch dimmer switch with 3 different brightness settings:
1st touch: On/Low brightness
2nd touch: Medium brightness
3rd touch: Max brightness
4th touch: Off
IMPORTANT SAFETY INSTRUCTIONS
1.
2. Never use with an extension cord unless the plug can be fully inserted.
3. Do not change or alter.
MADE IN CHINA
MADE IN CHINA
IMPORTANT: FIXTURE SHOULD BE INSTALLED BY
A QUALIFIED ELECTRICIAN TO ENSURE PROPER
WIRING AND INSTALLATION.
/