Minka Group P305-5-654-L User manual

  • Hello! I've reviewed the installation instructions for the Floor Lamp model P305-5-654-L. This document details the assembly process, highlighting the use of a touch dimmer switch with three brightness settings. I am ready to address any questions you might have about setting up or using this lamp.
  • What is the first brightness setting?
    How do I secure the lamp body to the base?
    What should I do before plugging in the unit?
Installation Instruction
For Floor Lamp
Model# P305-5-654-L
WARNING
:
Risk of shock, do not plug in the unit before assembly is complete.
Do not exceed the maximum wattage rating. (Ne pas depasser la puissance
nominale maximale!)
Before turning on, please follow the instruction manual step by step.
INSTALLATION
1.
Carefully unpack your new lamp and place all parts on a smooth, flat
surface to protect the finish until ready to install.
2.
Align lamp body (C) onto base (D). Secure lamp body (C) onto base (D)
with spring washers (E) followed by allen screws (F) via allen wrench (G).
3.
Connect the power adapter (A) to connector (B).
4.
Plug into power outlet and test your new fixture. Adjust the arm location as
desired.
5.
This lamp uses a touch dimmer switch with 3 different brightness settings:
1st touch: On/Low brightness
2nd touch: Medium brightness
3rd touch: Max brightness
4th touch: Off
IMPORTANT SAFETY INSTRUCTIONS
1.
Never use with an extension cord unless the plug can be fully inserted.
2.
Do not change or alter.
MADE IN CHINA
IMPORTANT: FIX
TURE SHOULD BE INSTALLED BY
A QUALIFIED ELECTRICIAN TO ENSURE PROPER
WIRING AND INSTALLATION.
/