Simply Conserve QEBD650 84 B-125 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Simply Conserve QEBD650 84 B-125 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1701 Charleston Regional Parkway Suite A | Charleston, SC 29492
Phone: 843.971.1414 | Fax: 843.971.1472 | Customer Toll-Free: 800.GOOD.BUY or 800.777.5665
www.amconservationgroup.com
Replacement Foam Door Seal Weather Strip Installation Instructions and
Warranty
You will need: Measuring tape and scissors
Step 1:
Remove old weatherstrip gasket by sliding out of carrier, if necessary. Clean
carrier/door jamb stop.
Step 2:
Measure the length of the carrier or door stop at the top of the door. Cut a
piece of the weatherstrip to fit. Insert cut piece into top of door carrier with
open sides of the ā€œvā€ facing upwards.
Step 3:
Measure the left and right door jamb stop and cut to size. Starting at the
top of the door insert the piece into each side door jamb stop pressing
firmly into place. The ā€œvā€ should be facing toward the door jamb. Trim
excess length with scissors if needed.
Product Warranty:
This product is warranted to be free from defects in material and workmanship for one year. For
replacement product, contact custo[email protected]om and have proof of
purchase available. Manufacture may require original product to be shipped back for evaluation
and/or pictures of defective product to be provided.
/